S32K144使用printf格式化输出

============================================================================= List of generated methods in project: FreeRTOS_printf_SDKv0_8_6 This text description is generated by Processor Expert. Do not modify it. ============================================================================= Module "pin_mux" (component PinSettings) - pin_mux_PINS_DRV_Init -This function configures the pins with the options provided in the provided structure - pin_mux_PINS_DRV_SetPullSel -This function configures the internal resistor - pin_mux_PINS_DRV_SetMuxModeSel -This function configures the pin muxing - pin_mux_PINS_DRV_SetPinIntSel -This function configures the port pin interrupt/DMA request - pin_mux_PINS_DRV_GetPinIntSel -This function gets the current port pin interrupt/DMA request configuration - pin_mux_PINS_DRV_ClearPinIntFlagCmd -This function clears the individual pin-interrupt status flag - pin_mux_PINS_DRV_EnableDigitalFilter -This function enables digital filter feature for digital pin muxing - pin_mux_PINS_DRV_DisableDigitalFilter -This function disables digital filter feature for digital pin muxing - pin_mux_PINS_DRV_ConfigDigitalFilter -This function configures digital filter for port with given configuration - pin_mux_PINS_DRV_GetPortIntFlag -This function reads the entire port interrupt status flag - pin_mux_PINS_DRV_ClearPortIntFlagCmd -This function clears the entire port interrupt status flag - pin_mux_PINS_DRV_SetGlobalPinControl -This function quickly configures multiple pins within the one port for the same peripheral function with the same pin configuration - pin_mux_PINS_DRV_SetGlobalIntControl -This function quickly configures multiple pins within the one port for the same peripheral function with the same interrupt configuration - pin_mux_PINS_DRV_GetPinsDirection -This function returns the current pins directions for a port. Pins corresponding to bits with value of '1' are configured as output and pins corresponding to bits with value of '0' are configured as input. - pin_mux_PINS_DRV_SetPinDirection -This function configures the direction for the given pin, with the given value('1' for pin to be configured as output and '0' for pin to be configured as input) - pin_mux_PINS_DRV_SetPinsDirection -This function sets the direction configuration for all pins in a port. Pins corresponding to bits with value of '1' will be configured as output and pins corresponding to bits with value of '0' will be configured as input. - pin_mux_PINS_DRV_SetPortInputDisable -This function sets the pins input state for a port. Pins corresponding to bits with value of '1' will not be configured as input and pins corresponding to bits with value of '0' will be configured as input - pin_mux_PINS_DRV_GetPortInputDisable -This function returns the current pins input state for a port. Pins corresponding to bits with value of '1' are not configured as input and pins corresponding to bits with value of '0' are configured as input - pin_mux_PINS_DRV_WritePin -This function writes the given pin from a port, with the given value ('0' represents LOW, '1' represents HIGH) - pin_mux_PINS_DRV_WritePins -This function writes all pins configured as output with the values given in the parameter pins. '0' represents LOW, '1' represents HIGH - pin_mux_PINS_DRV_GetPinsOutput -This function returns the current output that is written to a port. Only pins that are configured as output will have meaningful values - pin_mux_PINS_DRV_SetPins -This function configures output pins listed in parameter pins (bits that are '1') to have a value of 'set' (HIGH). Pins corresponding to '0' will be unaffected - pin_mux_PINS_DRV_ClearPins -This function configures output pins listed in parameter pins (bits that are '1') to have a 'cleared' value (LOW). Pins corresponding to '0' will be unaffected - pin_mux_PINS_DRV_TogglePins -This function toggles output pins listed in parameter pins (bits that are '1'). Pins corresponding to '0' will be unaffected - pin_mux_PINS_DRV_ReadPins -This function returns the current input values from a port. Only pins configured as input will have meaningful values Module "clockMan1" (component clock_manager) - clockMan1_CLOCK_SYS_Init -Install pre-defined clock configurations. - clockMan1_CLOCK_SYS_UpdateConfiguration -Set system clock configuration according to pre-defined structure. - clockMan1_CLOCK_SYS_SetConfiguration -Set system clock configuration. - clockMan1_CLOCK_SYS_GetCurrentConfiguration -Get current system clock configuration. - clockMan1_CLOCK_SYS_GetErrorCallback -Get the callback which returns error in last clock switch. - clockMan1_CLOCK_SYS_GetFreq -Gets the clock frequency for a specific clock name. - clockMan1_CLOCK_DRV_Init -Initialize clocking modules - clockMan1_CLOCK_DRV_GetFreq -Return frequency - clockMan1_CLOCK_DRV_EnablePeripheralClock -Enables peripheral clock - clockMan1_CLOCK_DRV_DisablePeripheralClock -Disables peripheral clock - clockMan1_CLOCK_DRV_SetSystemClock -Configures the system clocks - clockMan1_CLOCK_DRV_GetSystemClockSource -Gets the system clock source - clockMan1_CLOCK_DRV_SetIrc -Enable or disable SIRC clock source. - clockMan1_CLOCK_DRV_SetXosc -Enable or disable SOSC clock source - clockMan1_CLOCK_DRV_SetPll -Enable or disable SPLL clock source - clockMan1_CLOCK_DRV_SetLpo -Enable or disable LPO clock source Module "intMan1" (component interrupt_manager) - intMan1_INT_SYS_InstallHandler -Installs an interrupt handler routine for a given IRQ number. - intMan1_INT_SYS_EnableIRQ -Enables an interrupt for a given IRQ number. - intMan1_INT_SYS_DisableIRQ -Disables an interrupt for a given IRQ number. - intMan1_INT_SYS_EnableIRQGlobal -Enables system interrupt. - intMan1_INT_SYS_DisableIRQGlobal -Disable system interrupt. - intMan1_INT_SYS_SetPriority -Set Interrupt Priority. - intMan1_INT_SYS_GetPriority -Get Interrupt Priority. - intMan1_INT_SYS_ClearPending -Clear Pending Interrupt. - intMan1_INT_SYS_SetPending -Set Pending Interrupt. - intMan1_INT_SYS_GetPending -Get Pending Interrupt. - intMan1_INT_SYS_GetActive -Get Active Interrupt. Module "FreeRTOS" (component FreeRTOS) - FreeRTOS_xCoRoutineCreate -Create a new co-routine and add it to the list of co-routines that are ready to run. - FreeRTOS_crDELAY -Delay a co-routine for a fixed period of time. crDELAY can only be called from the co-routine function itself - not from within a function called by the co-routine function. This is because co-routines do not maintain their own stack. - FreeRTOS_crQUEUE_SEND -crQUEUE_SEND is a macro. The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine equivalent to the xQueueSend() and xQueueReceive() functions used by tasks. - FreeRTOS_crQUEUE_RECEIVE -crQUEUE_RECEIVE is a macro. The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine equivalent to the xQueueSend() and xQueueReceive() functions used by tasks. - FreeRTOS_crQUEUE_SEND_FROM_ISR -crQUEUE_SEND_FROM_ISR() is a macro. The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR() functions used by tasks. - FreeRTOS_crQUEUE_RECEIVE_FROM_ISR -crQUEUE_SEND_FROM_ISR() is a macro. The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the co-routine equival