AMERICAN NATIONAL STANDARD
ANSI/ISA—95.00.03—2005
Enterprise Control System Integration
Part 3: Activity Models of Manufacturing
Operations Management
Approved 6 June 2005
subject to the restrictions stated in ISA’s license to that person. It may not be
provided to any other person in print, electronic, or any other form.
Violations of ISA’s copyright will be prosecuted to the fullest extent of the
law and may result in substantial civil and criminal penalties.
NOTICE OF COPYRIGHT
This is a copyright document and may not be copied or distributed in any
form or manner without the permission of ISA. This copy of the document
was made for the sole use of the person to whom ISA provided it and is
ANSI/ISA-95.00.03-2005
Enterprise-Control System Integration Part3: Activity Models of Manufacturing Operations Management
ISBN: 1-55617-955-3
Copyright © 2005 by ISA–The Instrumentation, Systems, and Automation Society. All rights reserved. Not
for resale. Printed in the United States of America. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying,
recording, or otherwise), without the prior written permission of the Publisher.
ISA
67 Alexander Drive
P. O. Box 12277
Research Triangle Park, North Carolina 27709
USA
- 3 - ANSI/ISA-95.00.03-2005
PREFACE
This preface, as well as all footnotes and annexes, is included for information purposes and is not part of
ANSI/ISA-95.00.03-2005.
The standards referenced within this document may contain provisions which, through reference in this
text, constitute requirements of this document. At the time of publication, the editions indicated were
valid. All standards are subject to revision, and parties to agreements based on this document are
encouraged to investigate the possibility of applying the most recent editions of the standards indicated
within this document. Members of IEC and ISO maintain registers of currently valid International
Standards. ANSI maintains registers of currently valid U.S. National Standards.
This document has been prepared as part of the service of ISA–The Instrumentation, Systems, and
Automation Society, toward a goal of uniformity in the field of instrumentation. To be of real value, this
document should not be static but should be subject to periodic review. Toward this end, the Society
welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and
Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709;
Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: standards@isa.org.
The ISA Standards and Practices Department is aware of the growing need for attention to the metric
system of units in general, and the International System of Units (SI) in particular, in the preparation of
instrumentation standards. The Department is further aware of the benefits to USA users of ISA
standards of incorporating suitable references to the SI (and the metric system) in their business and
professional dealings with other countries. Toward this end, this Department will endeavor to introduce
SI-acceptable metric units in all new and revised standards, recommended practices, and technical
reports to the greatest extent possible. Standard for Use of the International System of Units (SI): The
Modern Metric System, published by the American Society for Testing & Materials as IEEE/ASTM SI 10-
97, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and
conversion factors.
It is the policy of ISA to encourage and welcome the participation of all concerned individuals and
interests in the development of ISA standards, recommended practices, and technical reports.
Participation in the ISA standards-making process by an individual in no way constitutes endorsement by
the employer of that individual, of ISA, or of any of the standards, recommended practices, and technical
reports that ISA develops.
CAUTION — ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDS
INSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT IS
REQUIRED FOR USE OF THE STANDARD, IT WILL REQUIRE THE OWNER OF THE PATENT TO
EITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF THE PATENT BY USERS COMPLYING
WITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT ARE
FREE FROM UNFAIR DISCRIMINATION.
EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD, THE USER IS
CAUTIONED THAT IMPLEMENTATION OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES,
PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THE
EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTING
THE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PATENTS THAT MAY
REQUIRE A LICENSE BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATING
THE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT TO ITS ATTENTION. THE USER SHOULD
CAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THE
USER’S INTENDED APPLICATION.
HOWEVER, ISA ASKS THAT ANYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANY
PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISA
STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER.
Copyright 2005 ISA. All rights reserved.
ANSI/ISA-95.00.03-2005 - 4 -
ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS,
OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT ANTICIPATE ALL POSSIBLE
APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN
HAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUND
PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USER’S
PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE APPLICABILITY OF
ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH
PRACTICES BEFORE IMPLEMENTING THIS STANDARD.
THE USER OF THIS DOCUMENT SHOULD BE AWARE THAT THIS DOCUMENT MAY BE IMPACTED
BY ELECTRONIC SECURITY ISSUES. THE COMMITTEE HAS NOT YET ADDRESSED THE
POTENTIAL ISSUES IN THIS VERSION.
The following individuals served as voting members of ISA-SP95 during the development of ANSI/ISA-
95.00.03-2005.
NAME COMPANY
Keith Unger
*
Rockwell Automation and Stone Technologies Inc.
William Bosler
**
Texas Consultants Inc.
Donald Clark
**
Invensys Process Systems
Dennis Brandl
***
BR&L Consulting, Inc.
Chris Monchinski
****
Automated Control Concepts, Inc.
Gary Addison Lyondell – Equistar Chemicals LP
David Adler Eli Lilly & Co
Lynn Craig MAA Inc
Eric Cosman Dow Chemical
Paresh Dalwalla OpteBiz
Dennis Delaney Accenture
Em delaHostria Rockwell Automation
Stefano Dighero Siemens
David Emerson Yokogawa Corp. of America
Charlie Gifford GE Fanuc America
Les Hastings ProsCon Ltd
Gavan Hood~ Rockwell Automation
Jay Jeffreys~ Invensys Wonderware
Charlotta Johnsson Siemens and Lund Institute of Technology
Alan Johnston MIMOSA
Marc Leroux ABB Inc.
Richard Martin Aspen Technology
Yasuyuki Nishioka Hosei University
Saroj Patnaik Emerson Process Automation
Costantino Pipero Invensys Wonderware
Anne Poorman~ ABB Automation Inc.
Leif Poulsen Novo Nordisk Engineering, A/S
Leon Steinocher Fluor Enterprises, Inc.
Swarandeep Singh~ ABB AS
Jean Vieille Consultant
Ray Walker DuPont Engineering
Theodore Williams Purdue University
*
Chairman
**
Vice Chairman
***
Editor
Copyright 2005 ISA. All rights reserved.
- 5 - ANSI/ISA-95.00.03-2005
****
Secretary
~ Alternate
The following individuals also participated in the development of ANSI/ISA-95.00.03-2005:
NAME COMPANY
Jon Barry Queue Systems Inc.
Rafael Batres Toyohashi University of Technology
Bernadine Brown E I du Pont de Nemours and Co.
Rudy Bunger BC Consulting
Yves Carrier Keops Technologies Inc.
Anthony Chandler Proscon Ltd
David A. Chappell Procter & Gamble
David Connelly Open Applications Group
David Cornel Procter & Gamble
Russ Dickenson Dow Chemical
Llorenç Domingo Aspen Technology
Steve Downs Applied Creative Technologies
Bernard Dumortier Schneider Electric
Daniel Dziadiw Schering Plough Corp.
Joseph Faccenda Aspen Technology
Christine Hermetet-Filez AFNOR
Kevin Fitzgerald Invensys
Tony Gallo Adelphia
Alistair Gillanders Aspen Technology
Boyd Gochenour Aspen Technology
Mike Grasley ASECO
Steve Graham Dow Chemical
Graeme Hall Aspen Technology
William Hawkins HLQ Ltd.
Girish Joglekar Purdue University
Hansil Kim University of Ulsan
Eugene Lambert Wunderlich-Malec
Jim Luth OPC Foundation
Kishen Manjunath Honeywell Process Solutions
Jean-Jacques Michel IDPI Conseil
Mark Muroski ABB Automation, Inc.
Paul Nowicki Rockwell Automation
Ashok Rao Aspen Technology
Gary Rathwell Enterprise Consultants
Tom Reed EnteGreat Inc.
Marty Richards ABB Automation, Inc.
Thorsten Ruehl Camstar
Nate Schallert Eli Lilly & Co
Paul Schiller BP America
Bianca Scholten TWP and Ordina
Dave Shorter IT Focus
Leng Shan Southeast University
Bryan Singer Rockwell Automation
Jeremy Suratt SSA Global
Arne Svendsen Arla Foods
Jason Toschlog Flexware Innovation
Steve Williams Aspen Technology
Gregory Winchester NEMA
Chunhua Zhao Purdue University
Copyright 2005 ISA. All rights reserved.
- 1
- 2
- 3
- 4
前往页