1
和滑境干涉的倒勾者青加月蓼填平至
The undercut area where interfere with slide block need
滑可以平
K
滑勤
to be f 川 ed material to help the slide can move
smoothly
The thickening added too thick.
The thickening area is too wide.
Gate position is moved.
The split line of slide block or the area of slide.
2
3
4
5
加月蓼太多
加月蓼闻稹太大
灌黑占位置移位
滑现拆的位置
此庭启尖角,填充困头隹
6
This area is hard to be filled due to the sharp feature
7
此虞金同材太薄,弓金度不足而且不
The strength of this area is too weak and isn ' t easy
容易冷郤
to get cold due to the steel too thin
8
圄柱特徵要有一半阊/、可以拆在 滑
现上,以免粘滑现造成拉白, 四.
9
The semicircle of cylinder avoids designing on slide
block lest it will be pulled apart or cause drag mark.
此虑做斜金肖在作
S&
畤簿 破壤到成
r
品
10
The part will be damaged if we make lifter in this area.
This is critical surface where is not allow to add
material.
道他面是装配面,不能加月蓼
此虑料位太厚,曾有缩水,建
H
减小
塑料厚度以改善
11
This thick wall area might because sink mark, Please
reduce some wall thickness to improve it.
12
此虑做滑境的有结合
M
碓百忍是含可
以接受
Please confirm whether it is acceptable to has Slide
split line if we have slide in this area.
13
清碓^此面是不是外觐面
?
Please confirm whether it is critical surface or not?
14
此蜓有倒勾,能否减料,使公母 模靠
破,不做滑瑰和斜金肖
Please confirm whether we can reduce material to the
area where have undercut as indicated to have shut off
on core and cavity side. No slide block and lifter to be
made.
15
小快吟道的顾占,否
JW
曾影 簪交期
Otherwise the lead-time will be extended.
16
Gate
做在此虑的^
.
Please confirm these questions asap.
3
打
11
彳爰 看
The trim mark of the gate is not visual after open the
top case if the gate position is designed like it
/、到
Gate
的修剪部位