没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
Description
The ADNS-3080 is a high performance addition to Avago
Technologies’ popular ADNS family of optical mouse
sensors.
The ADNS-3080 is based on a new, faster architecture with
improved navigation. The sensor is capable of sensing high
speed mouse motion - up to 40 inches per second and
acceleration up to 15g – for increased user precision and
smoothness.
The ADNS-3080 along with the ADNS-2120 (or ADNS-2120-
001) lens, ADNS-2220 (or ADNS-2220-001) assembly clip and
HLMP-ED80-XX000 form a complete, compact optical mouse
tracking system. There are no moving parts, which means
high reliability and less maintenance for the end user. In
addition, precision optical alignment is not required, facilitat-
ing high volume assembly.
The sensor is programmed via registers through a four-wire
serial port. It is packaged in a 20-pin staggered dual inline
package (DIP).
Theory of Operation
The ADNS-3080 is based on Optical Navigation Technol-
ogy, which measures changes in position by optically
acquiring sequential surface images (frames) and math-
ematically determining the direction and magnitude of
movement.
It contains an Image Acquisition System (IAS), a Digital
Signal Processor (DSP), and a four-wire serial port.
The IAS acquires microscopic surface images via the lens
and illumination system. These images are processed
by the DSP to determine the direction and distance of
motion. The DSP calculates the ∆x and ∆y relative dis-
placement values.
An external microcontroller reads the ∆x and ∆y informa-
tion from the sensor serial port. The microcontroller then
translates the data into PS2 or USB signals before sending
them to the host PC or game console.
Features
• High speed motion detection – up to 40 ips and 15g
• New architecture for greatly improved optical
navigation technology
• Programmable frame rate over 6400 frames per
second
• SmartSpeed self-adjusting frame rate for optimum
performance
• Serial port burst mode for fast data transfer
• 400 or 1600 cpi selectable resolution
• Single 3.3 volt power supply
• Four-wire serial port along with Chip Select, Power
Down, and Reset pins
Applications
• Mice for game consoles and computer games
• Mice for desktop PC’s, Workstations, and portable
PC’s
• Trackballs
• Integrated input devices
ADNS - 3080
High-Performance Optical Mouse Sensor
Data Sheet
2
Pinout
GND
NC
GND
VDD3
REFC
VDD3
NC
OPTP
NC
REFB
NCS
MISO
SCLK
GUARD
LED_CTRL
RESET
NPD
OSC_OUT
MOSI
OSC_IN
TOP VIEW
PINOUT
A3080
XYYWWZ
1
3
4
2
5
6
7
8
9
10
20
18
17
19
16
15
14
13
12
11
Figure 1. Package outline drawing (top view)
Pin Name Description
1 NCS Chip select (active low input)
2 MISO Serial data output
(Master In/Slave Out)
3 SCLK Serial clock input
4 MOSI Serial data input
(Master Out/Slave In)
5 LED_CTRL LED control output
6 RESET Reset input
7 NPD Power down (active low input)
8 OSC_OUT Oscillator output
9 GUARD Oscillator gnd for PCB guard
(optional)
10 OSC_IN Oscillator input
11 NC No connect
12 OPTP Connect to VDD3
13 REFC Reference capacitor
14 REFB Reference capacitor
15 VDD3 Supply voltage
16 GND Ground
17 VDD3 Supply voltage
18 NC No connect
19 GND Ground
20 NC No connect
3
Figure 2. Package outline drawing
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent
damage and/or degradation which may be induced by ESD.
4
the optimum angle. Features on the lens align it to the
sensor, base plate, and clip with the LED. The lens also
has a large round ange to provide a long creepage path
for any ESD events that occur at the opening of the base
plate.
The ADNS-2220-001 clip holds the LED in relation to
the lens. The LED must be inserted into the clip and the
LED’s leads formed prior to loading on the PCB. The clip
interlocks the sensor to the lens, and through the lens to
the alignment features on the base plate.
The HLMP-ED80-XX000 LED is recommended for illumina-
tion. If used with the bin table, sucient illumination can
Figure 3. Recommended PCB mechanical cutouts and spacing
2D Assembly Drawing of ADNS-3080
Shown with ADNS-2120, ADNS-2220 and HLMP ED80-
XX000.
Avago Technologies provides an IGES le drawing de-
scribing the base plate molding features for lens and PCB
alignment.
The components interlock as they are mounted onto
dened features on the base plate.
The ADNS-3080 sensor is designed for mounting on a
through hole PCB, looking down. There is an aperture
stop and features on the package that align to the lens.
The ADNS-2120 lens provides optics for the imaging
of the surface as well as illumination of the surface at
Overview of Optical Mouse Sensor Assembly
5
Figure 4. 2D Assembly drawing of ADNS-3080 (top and side view)
NOTE: These new Avago Technologies optical mouse sensors, lenses and clips have dierent physical congurations
that require a dierent PCB mounting method to optimize the navigation performance.
Refer Application Notes AN 5035 for further information.
剩余38页未读,继续阅读
资源评论
hele_two
- 粉丝: 74
- 资源: 9
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功