USB Disk Production Tool Us er Manual Ver.
3.1
2008-02-01
1
Skymedi
USB Disk Production Tool
User Manual
Rev: 3.0
Date:2007/10/01
USB Disk Production Tool Us er Manual Ver.
3.1
2008-02-01
2
1. Preface:
All UFD with SK62XX series，need to use PDT program to perform LLF before
using to Device。PDT also provide FLASH basic testing & partition & CD Rom
function。
2. Operation Flow Chart :
Start PDT
program
Choose
Configuration file
Modify the
Config
parameter
Go to
Advanced
setting
Plug in UFD and
Press LLF
PASS
Finish LLF and Show
results
FAIL
YES
NO
USB Disk Production Tool Us er Manual Ver.
3.1
2008-02-01
3
3. PDT Program:
Double Click the Icon to start Skymedi UFD PDT
3-1 Main Window
Following sections describe detail function of this operating window
USB Disk Production Tool Us er Manual Ver.
3.1
2008-02-01
4
3-1-1. Time
To record the elapse time of start test to finished
3-1-2. Configuration Selection (Configuration File)
To select a configuration file
User can press Advanced Button to open environment Setting window to edit the selected config file
orcreate a new config file
3-1-3. Configuration
Display the summary of the selected config file
USB Disk Production Tool Us er Manual Ver.
3.1
2008-02-01
5
3-1-4. Function description of each Push Buttons
(1). Reset Hub
(2). Stop: Test Stop
(3). Exit: Finish and exit the Production Tool
(4). Advance: Advance setting，the Environment Setting window will pop up and user can edit config
file on this window
(5). Auto-LLF: Start test when this button is pressed then Tool start execute USB Disk Low Level
Format function
(6). 8/16 Ports: Show 8 or 16 port
3-1-5. Status and Error Description
USB Port Status Icon
(1). Empty: Indicate there is no device in the USB port
评论0