![](https://csdnimg.cn/release/download_crawler_static/54056777/bg1.jpg)
several group number, then with b ± a, =c,c is is methyl b two vertical box between of accurate size. Per-2~3 measurement, such as proceeds of c values are equal and equal to the design value, then the vertical installation accurate. For example a, b, and c valueswhile on horizontal vertical errors for measurement, General in iron angle code bit at measurement level points grid errors, specific method is from baseline to methyl vertical box center line distance for a,, to b vertical box distance for b, list can measured
轴承公差关联的尺寸
1. 公称内径(外径) noninal bore diameter (outside diameter)
包络基本圆柱形内孔(圆柱形外表面)理论表面的圆柱体的直径。在一指定的径向平面内,包络
圆锥孔理论表面的圆锥体的直径。包络基本球形表面的理论表面的球面直径。
注:对于滚动轴承的公称内径公称外径,一般是实际内孔与外表面偏差的基准值。
2. 套 圈 公称宽度 nominal ring width
轴承套圈两理论端面间的距离。一般是实际宽度偏差的基准值(基本尺寸)。
3. 轴承公称宽度(轴承高度) nominal bearing width (bearing height)
套圈两理论端面(垫圈背面)间的距离,用以限定向心轴承宽度(推力轴承高度)。一般是轴承
实际宽度或轴承实际高度偏差的基准值(基本尺寸)。
4. 轴承实际宽度 actual bearing width
向心轴承的轴心线与限定轴承宽度的套圈实际端面的两个切平面交点间的距离。用内圈端面及外
圈端面的限定轴承宽度。
注:对单列圆 锥 滚 子 轴 承 ,为轴承轴心线与下述两平面交点间的距离:一个平面是与内圈实际背面
相切的平面,另一个是与外圈实际背面相切的平面。此时内、外圈滚道以及内圈背面挡边的里边均与
所有滚子相接触。
5. 轴承实际高度 actual bearing height
推力轴承轴心线与限定轴承高度的垫圈两个实际背面的切平面交点间的距离。
6. 轴承实际高度偏差 deviation of the actual bearing height
推力轴承实际高度与公称高度之差。
7. 公称倒角尺寸 nominal chamfer dimension
作为基准的倒角尺寸。
8. 径向单一倒角尺寸 radial single chamfer dimension
在单一轴向平面内,套圈或垫圈的假想尖角到倒角表面与套圈或垫圈端面交点间的距离。