路由器备份config.bin文件密码查看器

RouterPassView v1.40 Copyright (c) 2010 - 2012 Nir Sofer Web site: http://www.nirsoft.net Description =========== Most modern routers allow you to backup the configuration of the router into a file, and then restore the configuration from the file when it's needed. The backup file of the router usually contains important data like your ISP user name/password, the login password of the router, and wireless network keys. If you lost one of these password/keys, but you still have a backup file of your router configuration, RouterPassView might help you to recover your lost password from your router file. System Requirements =================== * This utility works on any version of Windows, starting from Windows 2000 and up to Windows 7. * RouterPassView supports limited number of router models. See below. Versions History ================ * Version 1.40: o Added support for D-Link DI-524 (firmware versions 2.x and 3.x), D-Link DI-624+A, and other routers with DLB6061 / DLB6031 signature. * Version 1.39: o Fixed a bug with decryption of Asus routers (Asus RT-N10+, Asus RT-N56U, and others) * Version 1.38: o Added support for Asus RT-N10+ , and possibly other routers with the same encryption. * Version 1.37: o Added support for HuaWei EchoLife HG520 (In Ascii Text Mode), and possibly other routers with the same encryption. * Version 1.36: o Added support for D-Link DIR-615 G2. * Version 1.35: o Added support for TP-LINK TL-WR700N, advanced versions of TL-WR340G, and probably other TP-LINK routers. * Version 1.33: o Imporved (again) the detection of Edimax routers. * Version 1.32: o Added support for multiple TP-LINK routers, including TL-WR841N, TL-WR841DN, TL-MR342, TL-WR340G, TL-R460, and probably other models. * Version 1.31: o Added support for decrypting the passwords of Linksys/Cisco RV042. * Version 1.30: o Imporved the detection of Edimax routers. * Version 1.29: o Added 'Open Router Web Interface' option (Ctrl+W), which allows you to easily open the Web interface of your router with your default Web browser. * Version 1.28: o Added support for more NETGEAR router models. * Version 1.27: o Added generic support (in Hex Dump mode) for router files that are encrypted with XOR 0xff, like Thomson TG580 DSL. * Version 1.26: o Added 'Copy Password/Value' option to easily copy only the password or wireless key into the clipboard. * Version 1.25: o Added support for D-Link DSL-604T and other models that their config file begins with LMMC signature. o Added generic support for router files that are compressed with Deflate compression algorithm. (only on Ascii and Hex Dump modes) * Version 1.20: o Added /sascii command-line option - Save the decrypted router file as Ascii text file. o Added /shex command-line option - Save the decrypted router file as hex-dump text file. o Added /sraw command-line option - Save the decrypted router file as raw binary file. * Version 1.16: o Added support for other versions of Edimax router file - currently only in Hex Dump mode. o When you open a file that RouterPassView can decrypt, but it cannot locate the exact passwords location, it'll automatically switch to Hex Dump mode, so you'll be able to try locating the password in the decrypted Hex Dump. * Version 1.15: o Added command-line support. o Fixed issue: Removed the wrong encoding from the xml string, which caused problems to some xml viewers. * Version 1.10: o Added 'Grab Password From IE Window' option - Allows you to open the router configuration interface in Internet Explorer, and then grab the password stored inside the password text-box of the router Web page. * Version 1.05: o Added support for D-Link DIR-300, and possibly similar models. * Version 1.04: o Added support for Sitecom WL-351, and possibly other models. * Version 1.03: o Fixed bug: user names of D-Link routers were wrong. * Version 1.02: o Added support for D-Link DIR-655, and possibly other models (with gateway_settings.gws filename) o Added support for Sanex SA 5100, and possibly other models. o Fixed bug: Copy to clipboard (Ctrl+C) was disabled in text mode. * Version 1.01: o Added support for Tomato firmware. o Added the password of 'support' user for D-Link DSL-2540U and possibly other routers. * Version 1.00 - First release. Supported Routers ================= Due to large amount of router models available in the market, it's impossible to support all of them. For now, RouterPassView supports a limited number of router models, and I'll gradually add support for more routers in future versions. Also, be aware that even if your router is not in the list, you can still try to open your router backup file with RouterPassView, because some routers are sold with different brand name, but they still use the same software/chipset of other routers. Here's the list: * Linksys WRT54GL (With original firmware or Tomato firmware), WRT54G (only some of them), WRT160N, and possibly similar models. * Edimax BR6204WG, and possibly similar models. * Siemens ADSL SL2-141, and possibly similar models. * Dynalink RTA1025W, and possibly similar models. * NETGEAR WGT624, and possibly similar models. * ASUS WL-520g, WL-600g, and possibly similar models. * ASUS RT-N10+ , and possibly similar models. * Asus RT-N56U , and possibly similar models. * D-Link DIR-655, DIR-300, and possibly similar models. * Sanex SA 5100, and possibly similar models. * Sitecom WL-351, WL-575, WL-312, and possibly similar models. * COMTREND 536+ (Only Internet Login) * US Robotics 9108 ADSL (internet login and admin login) * D-Link DSL-2540U/BRU/D ADSL2+, DSL-2650U, DSL-520B * D-Link DVA-G3170i/PT * D-Link DSL-604T * D-Link G3670B * D-Link DSL-2640T * D-Link DSL-G684T * D-Link 2740B * D-Link DIR-615 G2 * D-Link WBR-1310 * D-Link DI-524 * D-Link DI-624+A * TP-Link TD-8810 ADSL Modem/Router. * Dynamode R-ADSL-C4-W-G1 * NetComm NB5Plus4 DSL * Thomson TG580 DSL (only in Hex Dump mode) * Asus RT-G31 * HuaWei EchoLife HG520 (Only some of them) * TP-LINK TL-WR841N * TP-LINK TL-WR841DN * TP-LINK TL-MR342 * TP-LINK TL-WR340G * TP-LINK TL-R460 * TP-LINK TL-WR741ND v2.0 * TP-LINK TL-WR700N * TP-LINK TL-WR740N * TP-LINK TL-WA801N * TP-LINK TL-WR541G * Belkin N+ (F5D8236uk4) * Mercury MW54R If you have router model that is not listed here, and you managed to recover your password with RouterPassView, please report about it to nirsofer@yahoo.com and specify the exact model name. Using RouterPassView ==================== RouterPassView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - RouterPassView.exe After running RouterPassView, you can open your router configuration file by using 'Open Router Config File' option (Ctrl+O) or by dragging the config file from Explorer into the main window of RouterPassView. If RouterPassView manage to detect and decrypt your router file, you should get a list of passwords/wireless keys in the main window of RouterPassView. If RouterPassView cannot detect your file, it'll remain empty. Text Mode (Ascii and Hex Dump) ============================== If RouterPassView shows you a list of passwords, but you can't find the password or other data that you need, you may try to locate your password by switching to Ascii Text Mode (F3) or Hex Dump Text Mode (F4). In these modes, RouterPassView decrypts the router file, but display it "as is" without analyzing the data stored in it. How to submit a config file =========================== If you have a router config file that RouterPassView cann