RouterPassword View 1.38(查看路由真实密码,解决Hello123World)
操作说明:进入路由,在最后一项系统工具那里,备份路由配置,形成一个BIN文件,用这个工具打开,向软件作者致敬吧!
有高手回帖说到:不会用星号密码查看器别乱讲,使用搜狗保存密码网页表单,进表单管理里面,星号查看器就起作用了,不再是Hello123World了!
RouterPassView v1.40
Copyright (c) 2010 - 2012 Nir Sofer
Web site: http://www.nirsoft.net
Description
===========
Most modern routers allow you to backup the configuration of the router
into a file, and then restore the configuration from the file when it's
needed.
The backup file of the router usually contains important data like your
ISP user name/password, the login password of the router, and wireless
network keys.
If you lost one of these password/keys, but you still have a backup file
of your router configuration, RouterPassView might help you to recover
your lost password from your router file.
System Requirements
===================
* This utility works on any version of Windows, starting from Windows
2000 and up to Windows 7.
* RouterPassView supports limited number of router models. See below.
Versions History
================
* Version 1.40:
o Added support for D-Link DI-524 (firmware versions 2.x and 3.x),
D-Link DI-624+A, and other routers with DLB6061 / DLB6031 signature.
* Version 1.39:
o Fixed a bug with decryption of Asus routers (Asus RT-N10+, Asus
RT-N56U, and others)
* Version 1.38:
o Added support for Asus RT-N10+ , and possibly other routers with
the same encryption.
* Version 1.37:
o Added support for HuaWei EchoLife HG520 (In Ascii Text Mode), and
possibly other routers with the same encryption.
* Version 1.36:
o Added support for D-Link DIR-615 G2.
* Version 1.35:
o Added support for TP-LINK TL-WR700N, advanced versions of
TL-WR340G, and probably other TP-LINK routers.
* Version 1.33:
o Imporved (again) the detection of Edimax routers.
* Version 1.32:
o Added support for multiple TP-LINK routers, including TL-WR841N,
TL-WR841DN, TL-MR342, TL-WR340G, TL-R460, and probably other models.
* Version 1.31:
o Added support for decrypting the passwords of Linksys/Cisco RV042.
* Version 1.30:
o Imporved the detection of Edimax routers.
* Version 1.29:
o Added 'Open Router Web Interface' option (Ctrl+W), which allows
you to easily open the Web interface of your router with your default
Web browser.
* Version 1.28:
o Added support for more NETGEAR router models.
* Version 1.27:
o Added generic support (in Hex Dump mode) for router files that
are encrypted with XOR 0xff, like Thomson TG580 DSL.
* Version 1.26:
o Added 'Copy Password/Value' option to easily copy only the
password or wireless key into the clipboard.
* Version 1.25:
o Added support for D-Link DSL-604T and other models that their
config file begins with LMMC signature.
o Added generic support for router files that are compressed with
Deflate compression algorithm. (only on Ascii and Hex Dump modes)
* Version 1.20:
o Added /sascii command-line option - Save the decrypted router
file as Ascii text file.
o Added /shex command-line option - Save the decrypted router file
as hex-dump text file.
o Added /sraw command-line option - Save the decrypted router file
as raw binary file.
* Version 1.16:
o Added support for other versions of Edimax router file -
currently only in Hex Dump mode.
o When you open a file that RouterPassView can decrypt, but it
cannot locate the exact passwords location, it'll automatically
switch to Hex Dump mode, so you'll be able to try locating the
password in the decrypted Hex Dump.
* Version 1.15:
o Added command-line support.
o Fixed issue: Removed the wrong encoding from the xml string,
which caused problems to some xml viewers.
* Version 1.10:
o Added 'Grab Password From IE Window' option - Allows you to open
the router configuration interface in Internet Explorer, and then
grab the password stored inside the password text-box of the router
Web page.
* Version 1.05:
o Added support for D-Link DIR-300, and possibly similar models.
* Version 1.04:
o Added support for Sitecom WL-351, and possibly other models.
* Version 1.03:
o Fixed bug: user names of D-Link routers were wrong.
* Version 1.02:
o Added support for D-Link DIR-655, and possibly other models (with
gateway_settings.gws filename)
o Added support for Sanex SA 5100, and possibly other models.
o Fixed bug: Copy to clipboard (Ctrl+C) was disabled in text mode.
* Version 1.01:
o Added support for Tomato firmware.
o Added the password of 'support' user for D-Link DSL-2540U and
possibly other routers.
* Version 1.00 - First release.
Supported Routers
=================
Due to large amount of router models available in the market, it's
impossible to support all of them.
For now, RouterPassView supports a limited number of router models, and
I'll gradually add support for more routers in future versions. Also, be
aware that even if your router is not in the list, you can still try to
open your router backup file with RouterPassView, because some routers
are sold with different brand name, but they still use the same
software/chipset of other routers.
Here's the list:
* Linksys WRT54GL (With original firmware or Tomato firmware), WRT54G
(only some of them), WRT160N, and possibly similar models.
* Edimax BR6204WG, and possibly similar models.
* Siemens ADSL SL2-141, and possibly similar models.
* Dynalink RTA1025W, and possibly similar models.
* NETGEAR WGT624, and possibly similar models.
* ASUS WL-520g, WL-600g, and possibly similar models.
* ASUS RT-N10+ , and possibly similar models.
* Asus RT-N56U , and possibly similar models.
* D-Link DIR-655, DIR-300, and possibly similar models.
* Sanex SA 5100, and possibly similar models.
* Sitecom WL-351, WL-575, WL-312, and possibly similar models.
* COMTREND 536+ (Only Internet Login)
* US Robotics 9108 ADSL (internet login and admin login)
* D-Link DSL-2540U/BRU/D ADSL2+, DSL-2650U, DSL-520B
* D-Link DVA-G3170i/PT
* D-Link DSL-604T
* D-Link G3670B
* D-Link DSL-2640T
* D-Link DSL-G684T
* D-Link 2740B
* D-Link DIR-615 G2
* D-Link WBR-1310
* D-Link DI-524
* D-Link DI-624+A
* TP-Link TD-8810 ADSL Modem/Router.
* Dynamode R-ADSL-C4-W-G1
* NetComm NB5Plus4 DSL
* Thomson TG580 DSL (only in Hex Dump mode)
* Asus RT-G31
* HuaWei EchoLife HG520 (Only some of them)
* TP-LINK TL-WR841N
* TP-LINK TL-WR841DN
* TP-LINK TL-MR342
* TP-LINK TL-WR340G
* TP-LINK TL-R460
* TP-LINK TL-WR741ND v2.0
* TP-LINK TL-WR700N
* TP-LINK TL-WR740N
* TP-LINK TL-WA801N
* TP-LINK TL-WR541G
* Belkin N+ (F5D8236uk4)
* Mercury MW54R
If you have router model that is not listed here, and you managed to
recover your password with RouterPassView, please report about it to
nirsofer@yahoo.com and specify the exact model name.
Using RouterPassView
====================
RouterPassView doesn't require any installation process or additional DLL
files. In order to start using it, simply run the executable file -
RouterPassView.exe
After running RouterPassView, you can open your router configuration file
by using 'Open Router Config File' option (Ctrl+O) or by dragging the
config file from Explorer into the main window of RouterPassView.
If RouterPassView manage to detect and decrypt your router file, you
should get a list of passwords/wireless keys in the main window of
RouterPassView. If RouterPassView cannot detect your file, it'll remain
empty.
Text Mode (Ascii and Hex Dump)
==============================
If RouterPassView shows you a list of passwords, but you can't find the
password or other data that you need, you may try to locate your password
b
宽带路由密码查看器 RouterPassword View 1.38 解决Hello123World
3星 · 超过75%的资源 需积分: 41 187 浏览量
2013-08-29
23:31:48
上传
评论 5
收藏 110KB ZIP 举报
xulongche
- 粉丝: 1
- 资源: 3
最新资源
- STM32单片机FPGA毕设电路原理论文报告位标器动平衡测试系统中相位测量的实现
- STM32单片机FPGA毕设电路原理论文报告卫星天线的单片机快速对星系统
- STM32单片机FPGA毕设电路原理论文报告微型机与单片机串行通信的实现
- 戴尔Windowshello驱动程序
- STM32单片机FPGA毕设电路原理论文报告微型机单片机两级温度控制系统
- STM32单片机FPGA毕设电路原理论文报告微型地图里程测量仪的研制
- STM32单片机FPGA毕设电路原理论文报告微弱生理信号在多通道数据采集系统中的研究与实现
- 易打标-专业版-条码标签打印软件
- STM32单片机FPGA毕设电路原理论文报告微机原理与单片机课程体系改革
- STM32单片机FPGA毕设电路原理论文报告微机控制晶闸管投切电容器无功补偿装置
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
- 1
- 2
- 3
- 4
前往页