3
1. Outline
The product is suitable to measure the super low resistance such as a shunt resistance from
0.000 mΩto 1500.0Ω, accordingly the highly accurate and steady measurement at high speed
can be performed by feeding max. DC 3A of measurement current.
Two types of measurement mode are provided, one is the absolute value measurement which
indicates the resistance as it is, and the measurement which indicates the deviation to the
objective resistance for measurement by setting the reference resistance in advance.
At the same time, the measured value is indicated in digital and the product indicates the
judgment of [HI][GO][LO] to the pre-set upper and lower limit values. Besides the determination
output of the external can be set up to the Shift mode. It is also possible to sound the buzzer
according to the setting.
For measurement, the product uses the four terminal method which is adequate to the low
resistance measurement, and our newly developed measurement system can perform the
measurement canceling the effect of thermoelectromotive force which may cause a problem in low
resistance measurement.
This product performs the sample measurement for the fixed times and then processes the
average value treatment to carry out the extremely stable measurement Since the contact
function is installed as a standard to check the measuring terminals’ contact state every time and
it allows you to judge bad contact of measuring jigs or the like.
In addition, GP-IB and RS-232C interfaces can be options so that it can remote-control various
setting data, measurement values and judgment results by remote control.
2. Warranty ( Applicable in Japan only )
AEMIC CORP warrants to the original consumer or other end-user purchaser that this product is
free from defects in materials or workmanship or damage due to accidents during the
transportation, or clear responsibilities of AEMIC CORP for a period of 2 years from the date of
purchase.
During the warranty period, and upon proof of purchase, the product will be repaired without
charge for either parts or labor.
This warranty shall not apply if the product is modified, tampered with, misused,
or subjected to abnormal working conditions.
