基于cyclone2 fpga任意波形发生器VHDL设计QUARTUS工程文件+文档说明.zip

基于cyclone2 fpga的任意波形发生器VHDL设计QUARTUS工程文件+文档说明： library IEEE; use IEEE.std_logic_1164.all; use IEEE.std_logic_unsigned.all; use IEEE.std_logic_arith.all; entity DDS_top is port ( clk:in std_logic; --内部时钟 reset:in std_logic; --复位信号 key5 sclk:out std_logic; --TLC5615 sclk时钟脚 din:out std_logic; --TLC5615 din数据脚 cs:out std_logic; --TLC5615 cs片选 set_waveform_key_in:in std_logic; --波形设置按键 key1 set_f_key_in:in std_logic; --频率设置按键 key2 set_a_key_in:in std_logic; --幅值设置按键 key3 set_p_key_in:in std_logic; --相位设置按键 key4 sin_data:out std_logic_vector(9 downto 0) --输出的波形数据，用于测试 ); end DDS_top; architecture behave of DDS_top is signal set_waveform_line:std_logic_vector(1 downto 0); signal f_control_line:std_logic_vector(20 downto 0); signal a_control_line:std_logic_vector(3 downto 0); signal p_control_line:std_logic_vector(9 downto 0); signal dds_data_out_temp:std_logic_vector(9 downto 0); signal set_waveform_key:std_logic; signal set_f_key:std_logic; signal set_a_key:std_logic; signal set_p_key:std_logic; --DDs模块 component DDS is port( clk:in std_logic;--时钟输入 dds_data_out:out std_logic_vector(9 downto 0);--DDS数据输出 set_waveform:in std_logic_vector(1 downto 0);--设置输出的波形 set_f:in std_logic_vector(20 downto 0);--设置频率 set_a:in std_logic_vector(3 downto 0);--设置幅值 set_p:in std_logic_vector(9 downto 0)--设置频率 ); end component; -- DAC驱动模块 component TLC5615 is port( CLK:IN STD_LOGIC; SCLK:OUT STD_LOGIC; DIN:OUT STD_LOGIC; CS:OUT STD_LOGIC; DATA_IN:IN STD_LOGIC_VECTOR(9 DOWNTO 0) ); end component; -- 按键消抖模块 component key is port( clk:in std_logic; key:in std_logic; key_out:out std_logic ); end component; -- 按键编码模块 component key_coding i