JEDEC
STANDARD
Requirements for Handling
Electrostatic-Discharge-Sensitive
(ESDS) Devices
JESD625C
(Revision of JESD625B, January 2012)
OCTOBER 2022
JEDEC SOLID STATE TECHNOLOGY ASSOCIATION
NOTICE
JEDEC standards and publications contain material that has been prepared, reviewed, and
approved through the JEDEC Board of Directors level and subsequently reviewed and approved
by the JEDEC legal counsel.
JEDEC standards and publications are designed to serve the public interest through eliminating
misunderstandings between manufacturers and purchasers, facilitating interchangeability and
improvement of products, and assisting the purchaser in selecting and obtaining with minimum
delay the proper product for use by those other than JEDEC members, whether the standard is to
be used either domestically or internationally.
JEDEC standards and publications are adopted without regard to whether or not their adoption
may involve patents or articles, materials, or processes. By such action JEDEC does not assume
any liability to any patent owner, nor does it assume any obligation whatever to parties adopting
the JEDEC standards or publications.
The information included in JEDEC standards and publications represents a sound approach to
product specification and application, principally from the solid state device manufacturer
viewpoint. Within the JEDEC organization there are procedures whereby a JEDEC standard or
publication may be further processed and ultimately become an ANSI standard.
No claims to be in conformance with this standard may be made unless all requirements stated in
the standard are met.
Inquiries, comments, and suggestions relative to the content of this JEDEC standard or
publication should be addressed to JEDEC at the address below, or refer to www.jedec.org under
Standards and Documents for alternative contact information.
Published by
©JEDEC Solid State Technology Association 2022
3103 North 10th Street
Suite 240 South
Arlington, VA 22201-2107
This document may be downloaded free of charge; however JEDEC retains the
copyright on this material. By downloading this file the individual agrees not to
charge for or resell the resulting material.
PRICE: Contact JEDEC
Printed in the U.S.A.
All rights reserved
This page intentionally left blank
JEDEC Standard No. 625C
-i-
REQUIREMENTS FOR HANDLING ELECTROSTATIC-DISCHARGE-SENSITIVE (ESDS)
DEVICES
Contents
Page
1 Scope ............................................................................................................................................ 1
1.1 Applicable Users ........................................................................................................................... 1
1.2 Applicable Device Types .............................................................................................................. 1
1.3 Personnel Safety............................................................................................................................ 1
2 Technical References .................................................................................................................. 2
3 Terms and Definitions ................................................................................................................ 4
4 ESD Control Program ................................................................................................................ 6
4.1 Non-Technical Requirements ....................................................................................................... 6
4.1.1 Program Plan Documentation ....................................................................................................... 6
4.1.2 ESD Program Manager ................................................................................................................. 6
4.1.3 ESD Control Item Qualification ................................................................................................... 6
4.1.4 Compliance Verification ............................................................................................................... 6
4.1.5 Training ......................................................................................................................................... 6
4.1.5.1 Training Program .......................................................................................................................... 7
4.1.5.2 Training Records ........................................................................................................................... 7
4.1.6 Component Threshold Plan ........................................................................................................... 7
4.1.7 Tailoring ........................................................................................................................................ 7
4.2 Technical Requirements ................................................................................................................ 7
4.2.1 Grounding for Protection of ESDS Devices ................................................................................. 8
4.2.1.1 Equipment and Auxiliary ESD Grounds ....................................................................................... 9
4.2.1.2 Equipotential Bonding .................................................................................................................. 9
4.2.1.3 ESD Protected Workstation ESD Ground .................................................................................... 9
4.2.2 ESD Protective Worksurfaces ....................................................................................................... 9
4.2.3 ESD Ground Connections ............................................................................................................. 9
4.2.4 Managing Conductor Contact with ESDS (Essential Isolated Conductors) ................................. 9
4.2.5 Storage Areas .............................................................................................................................. 10
4.2.6 Mobile ESD Protected Workstation ............................................................................................ 10
4.3 Compliance Verification Records ............................................................................................... 14
4.4 ESD Signs and Labels ................................................................................................................. 14
4.4.1 ESD Caution Labels for Packing and Shipping .......................................................................... 14
4.4.2 Military Device Package ESD Caution Label ............................................................................. 14
JEDEC Standard No. 625C
-ii-
Contents (cont'd)
Pagee
5 ESD Protective Packaging and Handling Requirements for ESDS Devices ........................ 15
5.1 ESDS Device Protective Packaging Requirement ...................................................................... 15
5.2 Packing and Filler Materials ....................................................................................................... 15
5.3 Simulated Tribocharging ............................................................................................................ 15
6 Non-compliance ......................................................................................................................... 15
6.1 Handling Nonconforming Product .............................................................................................. 15
6.1.1 Mishandled ESDS devices .......................................................................................................... 15
Annex A Example Initial Compliance Verifications and Frequencies ............................................... 16
Annex B (Informative) (Example only) ESD Audit Checklist .............................................................. 17
Annex C (Informative) Reference Documents ....................................................................................... 19
Annex D (Informative) Differences between revisions of JESD625 ..................................................... 20
Figures
Figure 1 — Typical ESD Protected Workstation (Side View) ..................................................................... 8
Figure 2 — Example of ESD Protected Package Caution Label (ANSI/ESD 8.1) .................................... 14
Tables
Table 1 — ESD Grounding Requirements ................................................................................................... 8
Table A — Recommended Compliance Verifications and Frequencies..................................................... 16