STM32 2.04固件库

/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** * File Name : version.txt * Author : MCD Application Team * Version : V2.0.3 * Date : 09/22/2008 * Description : Version file for STM32F10x Firmware Library (FWLib). * The enclosed firmware and all the related documentation * are not covered by a License Agreement, if you need such * License you can contact your local STMicroelectronics * office. ******************************************************************************** * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. * AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE * CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING * INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. *******************************************************************************/ * V2.0.3 - 09/22/2008 ===================== General ******* + stm32f10xfwlib_contents_html file updated: - Description of firmware library package content - Easy-to-use firmware library examples: add description of how to use the project template to run the selected example < library > *********** + stm32f10x_map.h: add all STM32 Hardware registers bits definitions + stm32f10x_conf.h: add a define for HSEStartUp_TimeOut + stm32f10x_fsmc.h/.c: - FSMC_MemoryType_CRAM is changed to FSMC_MemoryType_PSRAM - FSMC_AsyncWait member removed from FSMC_NORSRAMInitTypeDef structure - FSMC_BusTurnAroundDuration parameter removed in case of write configuration + stm32f10x_rcc.h/.c: - RCC_FLAG_HSIRDY define value changed to 0x21. - StartUpCounterand HSEStatus variables are now local for RCC_WaitForHSEStartUp function. + stm32f10x_i2c.h/.c: - Add new event: EV8: I2C_EVENT_MASTER_BYTE_TRANSMITTING + stm32f10x_tim.c: - "=" operator changed to "|=" inside TIM_SelectOCxM function + stm32f10x_can.c: Definitions names changed < examples > ************ + I2C Interrupt example - Example updated according to I2C driver update + I2C M24C08_EEPROM example - i2c_ee.c file: add a loop on I2C_FLAG_BUSY in I2C_EE_PageWrite and I2C_EE_BufferRead functions - i2c_ee.c file: add STOP condition in I2C_EE_WaitEepromStandbyState function + SDIO example - Example updated to support SD Card V2.0 and SD High Capacity cards. + USART Polling example - USART TC flag check changed by USART TXE flag check * V2.0.2 - 07/11/2008 ===================== < library > *********** + stm32f10x_spi.c /.h - SPI_I2S_ClearFlag function: some flags are removed from the possible flags parameters list. This function can clear only CRCERR flag. - SPI_I2S_ClearITPendingBit function: some pending bits are removed from the possible pending bits parameters list. This function can clear only CRCERR pending bit. + stm32f10x_i2c.c /.h - I2C_ClearFlag function: some flags are removed from the possible flags parameters list. This function can clear only SMBALER, TIMEOUT, PECERR, OVR, AF, ARLO and BERR flags. The passed parameter can be any combination of above flags. - I2C_GetITStatus function checks on interrupt pending bit and the interrupt enable bit. - I2C_ClearITPendingBit function: some pending bits are removed from the possible pending bits parameters list. This function can clear only SMBALER, TIMEOUT, PECERR, OVR, AF, ARLO and BERR pending bits. The passed parameter can be any combination of above pending bits. + stm32f10x_usart.c /.h - USART_ClearFlag function: some flags are removed from the possible flags parameters list. This function can clear only CTS, LBD, TC and RXNE flags. - USART_GetITStatus function: IS_USART_IT macro is changed to IS_USART_GET_IT - USART_ClearITPendingBit function: some pending bits are removed from the possible pending bits parameters list. This function can clear only CTS, LBD, TC and RXNE pending bits. + stm32f10x_tim.c - remove IS_TIM_PERIPH_FLAG(TIMx, TIM_FLAG) macro from TIM_ClearFlag function + stm32f10x_wwdg.c - use register direct access in the WWDG_GetFlagStatus function instead of bit banding access + stm32f10x_gpio.c - GPIO_Init function update < examples > ************ + I2C Interrupt example - The example is changed to provide a description of how to manage data transfer from master transmitter to slave receiver and from slave transmitter to master receiver using interrupts. - add main.h file + I2C 10bitAddress example - Updated according to the I2C driver update + I2C DualAddress example - Updated according to the I2C driver update + I2C SMBus example - Updated according to the I2C driver update + USART DMA_Interrupt example - Updated according to the USART driver update + USART Smartcard example - Updated according to the USART driver update + DAC Examples - GPIO_Configuration function updated: Once the DAC channel is enabled, the corresponding GPIO pin is automatically connected to the DAC converter. In order to avoid parasitic consumption, the GPIO pin should be configured in analog. + RTC LSI_Calib example - Example Update: add main.h file * V2.0.1 - 06/13/2008 ===================== + Remove the Firmware License Agreement file + Update the source files's header to remove reference to the License * V2.0 - 05/23/2008 =================== General *********** + The FWLib V2.0 is an update of the V1.0 to support the extra peripherals and features embedded in the STM32 High-density devices. + Add Firmware License Agreement file + For more details about the Firmware Library, please refer to the User manual "UM0427 ARM�-based 32-bit MCU STM32F101xx and STM32F103xx Firmware Library" available for download from the ST microcontrollers website: www.st.com/stm32 Glossary - Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 32 and 128 Kbytes. - High-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. < library > *********** + Add driver for new peripherals: FSMC, SDIO and DAC. + stm32f10x_spi.c /.h - driver update to support new I2S functionality + Add driver for DBGMCU and CRC modules + stm32f10x_dma.c /.h - driver update to support DMA2 channels + stm32f10x_adc.c /.h - driver update to support ADC3 + stm32f10x_usart.c /.h - driver update to support UART4 and UART5 - new USART_ClockInitTypeDef structure derived from USART_InitTypeDef one (for USART synchronous parameters) + Timer peripherals driver - stm32f10x_tim1.c /.h and stm32f10x_tim.c /.h drivers merged in one single driver: stm32f10x_tim.c /.h -