100Base-T1 与SFP SGMII转换器；
The 100BASE-T1 SFP Module is the optimum solution to convert between 100BASE-T1 and SGMII. It fits into a standard Small Form-factor Pluggable (SFP) and generates 100 Mbit/s full-duplex 100BASE-T1.
It configures itself to Automotive 100BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.
Registers of the integrated Transceiver are accessible via I2C interface for diagnosis and reconfiguration.
It works seemlesly with our MediaGateway, which has one SFP slot. In any other case, please contact us for more info.
100BASE-T1 and SGMII converter
Fits into a standard SFP Slot
Power requirements: 3.3 Volt DC
Supports I2C for internal register access
DIP switch for Master/ Slave configuration
Size: 68 x 14 x 14 mm
Media Gateway 用于监控车载以太网通信，以太网端口测试，CAN/LIN/Flexray与100Base-T1路由测试等；在BMW，AUDI，BOSCH以及国内多公司大量使用；
MediaGateway from Technica Engineering is a development tool for testing and analyzing on-board vehicle networks.
MediaGateway from Technica Engineering is the most widely used development and testing tool for on-board vehicle networks using 100BASE-T1. It’s in-built automotive switches and 12 x 100BASE-T1 ports enable both capture of traffic between devices while maintaining the normal communication, as well as interaction with such devices via your test set-up. It supports single and double tagging of VLANs, Mirroring, Forwarding and more.
MediaGateway is excellently suitable for subsystem testing stations and can also be installed in a test vehicle without complications. It is configured conveniently via a browser through the integrated web server.
An additional and optional CAN-Ethernet bi-directional conversion is available, as well as FlexRay logging via Ethernet and one SFP slot.
The SFP slot supports commercial-grade SFP modules (e.g. optical or RJ-45) as well as our 100BASE-T1 SFP Module in order to get a 13th Automotive Ethernet Port or our 1000BASE-T1 SFP Module – this makes the MediaGateway ready for Automotive Gigabit Ethernet!
12 Broadcom 100BASE-T1 ports (100 MBit/s full duplex on a single unshielded twisted pair)
3 Gigabit Ethernet ports
1 SFP Gigabit Ethernet port
Automotive Tyco MQS connectors for 100BASE-T1 and power supply
Web server for easy configuration: Master/Slave, HalfOut/FullOut, Port Forwarding, Port Mirroring, VLAN Tagging
WakeUp function by CAN Bus or Wakeline
Power output for attached devices: VBAT max. 1 Ampere in total
19 status LEDs
Possibility to reset to default settings by pushbutton
Robust steel case
Power requirement: 8 to 16 V DC, power consumption: 8 Watt
Size: 195 x 143 x 33 mm
802.1AS Bridge function
100Base-T1 与100Base-Tx 快速以太网转换器，内置NXP PHY. 用于车载以太网芯片调试，模块测试，仿真等；
The 100BASE-T1 MediaConverter_NXP establishes one direct point-to-point conversion between automotive ECU’s using 100BASE-T1 and any standard Fast Ethernet device with RJ-45 connector.
No packets are stored or modified. It uses the NXP TJA1100_MRA4 Phy.
100BASE-T1 MediaConverter_NXP is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.
Convert 100BASE-T1 100 MBit/s Fullduplex 1 x Twisted Pair unshielded to Fast Ethernet 100BASETX Fullduplex 2 x Twisted Pair shielded or unshielded.
Master / Slave configuration
HalfOut / FullOut configuration
Power requirement: 8 to 16 Volt DC, Power consumption: 2 Watt
Massive stainless steel housing
Status LEDs
Configuration DIP switches
Automotive MQS connector included (Power, 100BASE-T1)
Standard Ethernet RJ45 connector
Size: 92 x 63 x 28 mm
100Base-T1车载以太网EMC测试模块，本模块可以直接放在EMC Chamber中，通过光纤转出，使用方便有效；
100BASE-T1 MEDIACONVERTER_EMC SET from Technica Engineering is the first commercial tool for EMC validation of 100BASE-T1 ECU’s. It works in a pair-set, converting 100BASE-T1 (a.k.a BroadR-Reach (TM from Broadcom)) to optical fibre and back to 100BASE-T1 and is specially designed to emit below the industry standard requirements.
No packages are stored or modified in the device. The process is a pure physical layer conversion.
100BASE-T1 MEDIACONVERTER_EMC SET is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.
-Converts 100BASE-T1 (a.k.a Broadcom BroadR-Reach) 100 MBit/s full duplex 1 x twisted pair unshielded to optical fiber and back to 100BASE-T1
-Master/slave configuration
-HalfOut/FullOut configuration
-Power requirement: 10 to 13 Vold DC (nominal 12 Volt DC), power consumption: 3 Watt
-Stainless steel housing
-Status LEDs
-Configuration DIP switches
-Automotive MQS connector included (Power, 100BASE-T1)
-Optical Fibre via SFP modules (modules and fibre included in the set)
-Size: 92 x 63 x 30mm
