MIPI_Specification for System Power Management Interface_V2.0

This document is a Draft MIPI Specification. MIPI member companies’ rights and obligations apply to this Draft MIPI Specification as defined in the MIPI Membership Agreement and MIPI Bylaws. An updated Frequently Asked Questions (FAQ) document has been prepared by the SPM Working Group for SPMI v2.0 Specification implementers. Also, a SPMI v2.0 Protocol Implementation Conformance Statement (PICS) document has been prepared by the SPM Working Group. The SPMI v2.0 Specification contains the following major changes with respect to SPMIv1.0: • Unified memory map for Slave Device. • Command acknowledgement (ACK/NACK) for Write commands where required. • System behavior upon detection of a parity error in an RCS Device-initiated Command Frame.

MIPI_Specification for D-PHY_V1.1

This document is a MIPI Specification. MIPI member companies’ rights and obligations apply to this MIPI Specification as defined in the MIPI Membership Agreement and MIPI Bylaws. However, implementers should be aware of the following: It is the good faith expectation of the MIPI PHY Working Group that D-PHY v1.1 is stable and robust. The MIPI Alliance currently recommends that any member companies considering implementation of D-PHY base their work on this version of the Specification (v1.1), which is intended to supersede the previous version (v1.00.00). This version of the Specification includes minor relaxations to the conformance ranges for several key parameters. These modifications are intended to ease implementation for designs supporting HS bitrates > 1 Gbps, allowing for slightly greater conformance margins for these parameters, to better allow for process and manufacturing variations in these implementations. In some cases the modified conformance limits apply only to operation at HS rates > 1 Gbps (while the previous limits still apply to rates ≤ 1Gbps), while in other cases the new conformance values are applicable to all HS rates. In all cases, the modified conformance limits have been widened with respect to the previous values, so that any implementation conformant to these parameters in the previous version of this Specification (v1.00.00) should also be conformant to the modified limits defined in this version (v1.1).

AMIS30623.pdf

AMIS30621 AFS SM Driver

AMIS30621.pdf

AMIS30621 AFS SM Driver