没有合适的资源?快使用搜索试试~ 我知道了~
SiLab C8051F930低压MCU方案
需积分: 11 25 下载量 106 浏览量
2010-03-18
14:10:42
上传
评论 1
收藏 896KB PDF 举报
温馨提示
试读
11页
SiLab C8051F930低压MCU方案 详细的低压方案……官方资料
资源推荐
资源详情
资源评论
SiLab C8051F930 低压MCU方案
关键词:低压MCU,工业控制,医疗仪器,消费类电子,无线传感器,
摘要:Silicon Lab公司的C8051F9xx是业界首个能工作到低于 0.9V的MCU系列,可采用单电
池工作,从而大大延长了双电池工作的寿命. C8051F9xx是全集成的混合信号片上系统MCU,
它集成DC/DC转换器,能提供快速叫醒时间,低工作模式和超低睡眠模式的电流消耗.广泛应
用在手提个人医疗设备,遥控,手提音频和消费类电子产品,无线传感器和安全,工业监视和控
制等. 本文介绍了C8051F9xx 系列的主要特性和几种系列的方框图, 以及包括基于
C8051F931-based ToolStick 女儿板和Capacitive Touch Sense 女儿板在内的开发套件的
主要特性别和开发板的电路图.
Silicon Lab公司的C8051F9xx是业界首个能工作到低于 0.9V的MCU系列,可采用单电池工
作,从而大大延长了双电池工作的寿命. C8051F9xx是全集成的混合信号片上系统MCU,它集
成DC/DC转换器,能提供快速叫醒时间,低工作模式和超低睡眠模式的电流消耗.广泛应用在
手提个人医疗设备,遥控,手提音频和消费类电子产品,无线传感器和安全,工业监视和控制等.
本文介绍了C8051F9xx 系列的主要特性和几种系列的方框图, 以及包括基于
C8051F931-based ToolStick 女儿板和Capacitive Touch Sense 女儿板在内的开发套件的
主要特性别和开发板的电路图.
The C8051F9xx is the industry’s first MCU family capable of full-spec operation down to
0.9 V and up to 3.6 V, enabling single-cell battery operation as well as dramatically
increasing battery life for dual-cell applications. With an integrated dc-dc converter, the
C8051F9xx has been designed to provide a fast wake-up time, low active-mode, and
ultra-low sleep mode current consumptions.
C8051F93x-C8051F92x devices are fully integrated mixed-signal System-on-a-Chip
MCUs. Highlighted features are listed below.
•Single/Dual Battery operation with on-chip dc-dc boost converter.
•High-speed pipelined 8051-compatible microcontroller core (up to 25 MIPS)
•In-system, full-speed, non-intrusive debug interface (on-chip)
•True 10-bit 300 ksps 23-channel single-ended ADC with analog multiplexer
•6-Bit Programmable Current Reference
•Precision programmable 24.5 MHz internal oscillator with spread spectrum
technology.
•64 kB or 32 kB of on-chip Flash memory
•4352 bytes of on-chip RAM
•SMBus/I2C, Enhanced UART, and two Enhanced SPI serial interfaces implemented
in hardware
•Four general-purpose 16-bit timers
•Programmable Counter/Timer Array (PCA) with three capture/compare modules and
Watchdog Timer function
•On-chip Power-On Reset, VDD Monitor, and Temperature Sensor
•Two On-chip Voltage Comparators with 23 Touch Sense inputs.
•24 or 16 Port I/O (5 V tolerant)
With on-chip Power-On Reset, VDD monitor, Watchdog Timer, and clock oscillator, the
C8051F93x-C8051F92x devices are truly stand-alone System-on-a-Chip solutions. The
Flash memory can be reprogrammed even in-circuit, providing non-volatile data storage,
and also allowing field upgrades of the 8051 firmware. User software has complete control
of all peripherals, and may individually shut down any or all peripherals for power savings.
The on-chip Silicon Labs 2-Wire (C2) Development Interface allows non-intrusive (uses
no on-chip resources), full speed, in-circuit debugging using the production MCU installed
in the final application. This debug logic supports inspection and modification of memory
and registers, setting breakpoints, single stepping, run and halt commands. All analog and
digital peripherals are fully functional while debugging using C2. The two C2 interface pins
can be shared with user functions, allowing in-system debugging without occupying
package pins.
Each device is specified for 0.9 to 1.8 V or 1.8 to 3.6 V operation over the industrial
temperature range (–40 to +85 °C). The Port I/O and
RST pins are tolerant of input signals
up to 5 V. The C8051F930/20 are available in 32-pin QFN or LQFP packages and the
C8051F931/21 are available in a 24-pin QFN package. Both package options are
lead-free and RoHS compliant.
Supply Voltage 0.9 to 3.6 V
-One-Cell Mode supports 0.9 to 1.8 V operation
-Two-Cell Mode supports 1.8 to 3.6 V operation
-Built-in dc-dc converter with 1.8 to 3.3 V output for use in one-cell mode
-Built-in LDO regulator allows a high analog supply voltage and low digital core
voltage
-2 built in brownout detectors
10-Bit Analog to Digital Converter
-±1 LSB INL; no missing codes
-Programmable throughput up to 300 ksps
-Up to 23 external inputs
-On-Chip 1.65 V ±TBD Voltage Reference
-On-Chip PGA allows measuring voltages up to twice the reference voltage.
-16-bit Auto-Averaging Accumulator with Burst Mode provides increased ADC
resolution.
-Data dependent windowed interrupt generator
-Built-in temperature sensor (±3 °C)
Two Comparators
-Programmable hysteresis and response time
-Configurable as wake-up or reset source
-Up to 23 Capacitive Touch Sense Inputs
6-Bit Programmable Current Reference
-Up to ±500 μA. Can be used as a bias or for generating a custom reference voltage.
On-Chip Debug
-On-chip debug circuitry facilitates full-speed, non-intrusive in-system debug (No
emulator required)
-Provides breakpoints, single stepping
-Inspect/modify memory and registers
-Complete development kit
High-Speed 8051 μC Core
-Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system
clocks
-Up to 25 MIPS throughput with 25 MHz clock
-Expanded interrupt handler
Memory
-4352 bytes internal data RAM (256 + 4096)
-64 kB (‘F93x) or 32 kB (‘F92x) Flash; In-system programmable in 1024-byte
sectors—1024 bytes are reserved in the 64 kB devices
Digital Peripherals
-24 or 16 port I/O; All 5 V tolerant with high sink current and programmable drive
strength-Hardware SMBus™ (I
2C™ Compatible), 2 x SPI™, and UART serial ports
available concurrently
-Four general purpose 16-bit counter/timers
-Programmable 16-bit counter/timer array with six capture/compare modules and
watchdog timer
-Hardware smaRTClock operates down to 0.9 V and requires less than 0.5 μA supply
current.
Clock Sources
-Internal oscillators: 24.5 MHz, 2% accuracy supports UART operation; 20 MHz low
power oscillator requires very little bias current.
-External oscillator: Crystal, RC, C, or CMOS Clock
-smaRTClock oscillator: 32 kHz Crystal or internal
-Can switch between clock sources on-the-fly; useful in implementing various power
saving modes
Packages
-32-pin QFN (5 x 5 mm)
-24-pin QFN (4 x 4 mm)
-32-pin LQFP (7 x 7 mm, easy to hand-solder)
剩余10页未读,继续阅读
资源评论
zongguanzhen
- 粉丝: 9
- 资源: 7
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功