/**
******************************************************************************
* @file stm32f1xx_hal_tim.c
* @author MCD Application Team
* @brief TIM HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the Timer (TIM) peripheral:
* + Time Base Initialization
* + Time Base Start
* + Time Base Start Interruption
* + Time Base Start DMA
* + Time Output Compare/PWM Initialization
* + Time Output Compare/PWM Channel Configuration
* + Time Output Compare/PWM Start
* + Time Output Compare/PWM Start Interruption
* + Time Output Compare/PWM Start DMA
* + Time Input Capture Initialization
* + Time Input Capture Channel Configuration
* + Time Input Capture Start
* + Time Input Capture Start Interruption
* + Time Input Capture Start DMA
* + Time One Pulse Initialization
* + Time One Pulse Channel Configuration
* + Time One Pulse Start
* + Time Encoder Interface Initialization
* + Time Encoder Interface Start
* + Time Encoder Interface Start Interruption
* + Time Encoder Interface Start DMA
* + Commutation Event configuration with Interruption and DMA
* + Time OCRef clear configuration
* + Time External Clock configuration
@verbatim
==============================================================================
##### TIMER Generic features #####
==============================================================================
[..] The Timer features include:
(#) 16-bit up, down, up/down auto-reload counter.
(#) 16-bit programmable prescaler allowing dividing (also on the fly) the
counter clock frequency either by any factor between 1 and 65536.
(#) Up to 4 independent channels for:
(++) Input Capture
(++) Output Compare
(++) PWM generation (Edge and Center-aligned Mode)
(++) One-pulse mode output
##### How to use this driver #####
==============================================================================
[..]
(#) Initialize the TIM low level resources by implementing the following functions
depending from feature used :
(++) Time Base : HAL_TIM_Base_MspInit()
(++) Input Capture : HAL_TIM_IC_MspInit()
(++) Output Compare : HAL_TIM_OC_MspInit()
(++) PWM generation : HAL_TIM_PWM_MspInit()
(++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
(++) Encoder mode output : HAL_TIM_Encoder_MspInit()
(#) Initialize the TIM low level resources :
(##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
(##) TIM pins configuration
(+++) Enable the clock for the TIM GPIOs using the following function:
__HAL_RCC_GPIOx_CLK_ENABLE();
(+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
(#) The external Clock can be configured, if needed (the default clock is the
internal clock from the APBx), using the following function:
HAL_TIM_ConfigClockSource, the clock configuration should be done before
any start function.
(#) Configure the TIM in the desired functioning mode using one of the
Initialization function of this driver:
(++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
(++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
Output Compare signal.
(++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
PWM signal.
(++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
external signal.
(++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
in One Pulse Mode.
(++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
(#) Activate the TIM peripheral using one of the start functions depending from the feature used:
(++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
(++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
(++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
(++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
(++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
(++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
(#) The DMA Burst is managed with the two following functions:
HAL_TIM_DMABurst_WriteStart()
HAL_TIM_DMABurst_ReadStart()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
/** @addtogroup STM32F1xx_HAL_Driver
* @{
*/
/** @defgroup TIM TIM
* @brief TIM HAL module driver
* @{
*/
#ifdef HAL_TIM_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup TIM_Private_Functions TIM Private Functions
* @{
*/
static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx,
没有合适的资源?快使用搜索试试~ 我知道了~
基于FreeRTOS、STM32CubeMX、STM32F103C8的LCD1602应用设计仿真
共216个文件
h:59个
o:31个
d:31个
需积分: 5 0 下载量 160 浏览量
2024-03-13
10:33:08
上传
评论
收藏 4.95MB RAR 举报
温馨提示
基于FreeRTOS、STM32CubeMX、STM32F103C8的LCD1602应用设计仿真
资源推荐
资源详情
资源评论
收起资源包目录
基于FreeRTOS、STM32CubeMX、STM32F103C8的LCD1602应用设计仿真 (216个子文件)
STM32F103C8.axf 591KB
stm32f1xx_hal_tim.c 168KB
tasks.c 154KB
queue.c 82KB
stm32f1xx_hal_adc.c 81KB
stm32f1xx_hal_tim_ex.c 61KB
stm32f1xx_hal_adc_ex.c 53KB
cmsis_os.c 52KB
stm32f1xx_hal_rcc.c 51KB
timers.c 40KB
stm32f1xx_hal_flash_ex.c 38KB
stm32f1xx_hal_rcc_ex.c 32KB
stm32f1xx_hal_flash.c 31KB
stm32f1xx_hal_dma.c 29KB
port.c 27KB
event_groups.c 26KB
stm32f1xx_hal_pwr.c 22KB
stm32f1xx_hal_gpio.c 22KB
stm32f1xx_hal.c 21KB
stm32f1xx_hal_cortex.c 20KB
heap_4.c 17KB
system_stm32f1xx.c 16KB
croutine.c 15KB
list.c 11KB
main.c 10KB
lcd1602.c 5KB
stm32f1xx_hal_gpio_ex.c 5KB
stm32f1xx_it.c 5KB
stm32f1xx_hal_msp.c 4KB
freertos.c 2KB
app.c 2KB
main.crf 496KB
stm32f1xx_it.crf 493KB
app.crf 493KB
freertos.crf 473KB
stm32f1xx_hal_adc.crf 457KB
stm32f1xx_hal_rcc.crf 455KB
stm32f1xx_hal_adc_ex.crf 452KB
stm32f1xx_hal_dma.crf 451KB
stm32f1xx_hal_flash_ex.crf 449KB
stm32f1xx_hal_flash.crf 448KB
stm32f1xx_hal_gpio.crf 447KB
stm32f1xx_hal_pwr.crf 446KB
stm32f1xx_hal_rcc_ex.crf 446KB
lcd1602.crf 445KB
stm32f1xx_hal.crf 444KB
stm32f1xx_hal_msp.crf 444KB
stm32f1xx_hal_cortex.crf 444KB
system_stm32f1xx.crf 444KB
stm32f1xx_hal_gpio_ex.crf 443KB
stm32f1xx_hal_tim_ex.crf 443KB
stm32f1xx_hal_tim.crf 443KB
cmsis_os.crf 67KB
tasks.crf 62KB
queue.crf 57KB
event_groups.crf 47KB
timers.crf 46KB
heap_4.crf 40KB
port.crf 37KB
croutine.crf 35KB
list.crf 30KB
stm32f1xx_it.d 3KB
main.d 3KB
app.d 3KB
freertos.d 3KB
stm32f1xx_hal_flash_ex.d 2KB
stm32f1xx_hal_gpio_ex.d 2KB
stm32f1xx_hal_cortex.d 2KB
stm32f1xx_hal_rcc_ex.d 2KB
stm32f1xx_hal_tim_ex.d 2KB
stm32f1xx_hal_adc_ex.d 2KB
stm32f1xx_hal_flash.d 2KB
stm32f1xx_hal_gpio.d 2KB
stm32f1xx_hal_msp.d 2KB
stm32f1xx_hal_tim.d 2KB
stm32f1xx_hal_pwr.d 2KB
stm32f1xx_hal_rcc.d 2KB
stm32f1xx_hal_adc.d 2KB
stm32f1xx_hal_dma.d 2KB
system_stm32f1xx.d 2KB
stm32f1xx_hal.d 2KB
lcd1602.d 2KB
cmsis_os.d 2KB
event_groups.d 1KB
tasks.d 1KB
timers.d 1KB
queue.d 1KB
croutine.d 1KB
heap_4.d 1KB
port.d 959B
list.d 924B
startup_stm32f103xb.d 58B
STM32F103C8_STM32F103C8.dbgconf 7KB
STM32F103C8_STM32F103C8.dep 72KB
stm32f103xb.h 864KB
arm_math.h 246KB
stm32_hal_legacy.h 178KB
core_cm7.h 136KB
core_cm4.h 112KB
core_cm3.h 101KB
共 216 条
- 1
- 2
- 3
资源评论
zhusl6688
- 粉丝: 906
- 资源: 169
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功