服务器硬盘测试工具Adptec EZ SCSI 6.0

-------------------------- Adaptec EZ-SCSI 6.0 README -------------------------- The following information is available in this file: 1. Supported Hardware 2. Version History 3. Additional Notes 1. Supported Hardware The following Adaptec SCSI Host Adapters are supported by EZ-SCSI 6.0: Ultra320 Controller Description ---------------------------------------------------------------- Adaptec SCSI Card 39320 Dual Channel 64-bit PCI-X 133MHz to Ultra320 SCSI Card (one external 68-pin, two internal 68-pin) Adaptec SCSI Card 39320D Dual Channel 64-bit PCI-X 133MHz to Ultra320 SCSI Card (two external VHDC and one internal 68-pin) Adaptec SCSI Card 29320 Single Channel 64-bit PCI-X 133MHz to Ultra320 SCSI Card (one external 68-pin, two internal 68-pin, one internal 50-pin) Adaptec SCSI Card 29320LP Single Channel 64-bit Low Profile PCI-X 133MHz to Ultra320 SCSI Card (One external VHDC, one internal 68-pin) 2. Version History (V6.00, September 2002) The following is a list of supported features for EZ-SCSI 6.0: 2.1. Features - Adaptec SCSI Explorer - Adaptec Web Resource - EZ-SCSI 6.0 Guide - SCSI Tutor - Uninstall - Adaptec SCSI Benchmark 2.2. Operating System Support: - Microsoft Windows NT 4.0 - Microsoft Windows 2000 - Microsoft Windows XP 3. Additional Notes 3.1. FYI's/Known Issues - Before you uninstall EZ-SCSI 6.0, you must close all instances of SCSI Explorer; this includes the application itself and the tray icon. If any instance of SCSI Explorer remains open, the uninstall will fail and the system will display a "Locked File Detected" error. Please refer to SCSI Explorer online help for more details. - The "apply" button in the SCSISelect screen in SCSI Explorer is grayed out. Modifications made in this section cannot be applied or saved. There are plans to support this feature in future versions of EZ-SCSI 6. - Running the SCSI Tutor under Windows NT 4.0 may cause scripting errors. This will occur if the default VGA adapter driver is being used at 640x480x16. To resolve this, update the video driver with one supplied by the video card manufacturer. - EZ-SCSI 6.0 does not support HostRAID controllers, and may report them as "older/embedded" or "unsupported or not fully supported". 3.2. Third-Party Compatibility Issues - When running SCSI Explorer, an attached iomega Jaz drive may take up to five minutes to report a defect list, or may also cause system instabilities. 3.3. Operating System Limitations - In order to view the EZ-SCSI 6.0 Help Section under NT 4.0, you must have the Microsoft HTML Help plug in installed. Without this plug-in your Windows-based help will not function. To install the plug-in, contact Microsoft or visit their support site. ------------------------------------------------------------------- (c) 2002 Adaptec, Inc. All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.