ST 强势推出STM32F10x_StdPeriph_Lib_V3.5.0 新库

/******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** * File Name : readme.txt * Author : MCD Application Team * Version : V3.3.0 * Date : 21-March-2011 * Description : Description of the binary directory. ******************************************************************************** * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. * AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, * INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE * CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING * INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. *******************************************************************************/ Description =================== This directory contains a set of sources files that build the application to be loaded into Flash memory using device firmware upgrade (DFU). To build such application, some special configuration has to be preformed: 1. Set the program load address at 0x08003000, using your toolchain linker file 2. Relocate the vector table at address 0x08003000, using the "NVIC_SetVectorTable" function. The SysTick example provided within the STM32F10xxx and STM32L152xxx Standard Peripheral examples is used as illustration. This example configures the SysTick to generate a time base equal to 1 ms. The system clock is set to 72 MHz for STM32F10xxx devices and to 32MHz for STM32L15xxx devices, the SysTick is clocked by the AHB clock (HCLK) A "Delay" function is implemented based on the SysTick end-of-count event. Four LEDs are toggled with a timing defined by the Delay function. Directory contents ================== + binary_template\EWARM: This folder contains a preconfigured project file that produces a binary image of SysTick example to be loaded with DFU. + binary_template\RIDE: This folder contains a preconfigured project file that produces a binary image of SysTick example to be loaded with DFU. + binary_template\MDK-ARM: This folder contains a preconfigured project file that produces a binary image of SysTick example to be loaded with DFU. + binary_template\HiTOP: This folder contains a preconfigured project file that produces a binary image of SysTick example to be loaded with DFU. + \TrueSTUDIO: This folder contains a preconfigured project file that produces a binary image of SysTick example to be loaded with DFU. + binary_template\inc: contains the binary_template firmware header files - stm32f10x_conf.h Library Configuration file for STM32F10xxx devices - stm32f10x_it.h Header for stm32f10x_it.c - stm32l15x_conf.h Library Configuration file for STM32L15xxx devices - stm32l15x_it.h Header for stm32l15x_it.c - main.h Header for main.c + binary_template\src: contains the binary_template firmware source files - main.c Main program - stm32f10x_it.c Interrupt handlers for STM32F10xxx devices - stm32f10x_it.c Interrupt handlers for STM32L15xxx devices Hardware environment ==================== This example runs on STMicroelectronics STM3210B-EVAL, STM3210C-EVAL, STM3210E-EVAL and STM32L152-EVAL evaluation boards and can be easily tailored to any other hardware. The selection of the evaluation board is done through the define into the project configuration. + STM3210B-EVAL - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08 and PC.09 pins + STM3210C-EVAL - Use LD1, LD2, LD3 and LD4 leds connected respectively to PD.07, PD.13, PD.03 and PD.04 pins + STM3210E-EVAL - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF.07, PF.08 and PF.09 pins + STM32L152-EVAL - Use LD1, LD2, LD3 and LD4 leds connected respectively to PD.00, PD.01, PD.02 and PC.12 pins How to use it ============= In order to load the SysTick example with the DFU, you must do the following: + EWARM - Open the SysTick.eww workspace - In the workspace toolbar select the project config: - STM3210B-EVAL: to configure the project for STM32 Medium-density devices - STM3210C-EVAL: to configure the project for STM32 Connectivity-Line devices - STM3210E-EVAL: to configure the project for STM32 High-density devices - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices - STM3210E-EVAL_XL: to configure the project for STM32 Medium-Density Low-Power devices - Rebuild all files: Project->Rebuild all - Go to "Utilities\Binary" and run "hextobin.bat" - A binary file "SysTick.bin" will be generated under "STM3210E-EVAL\Exe" or "STM3210C-EVAL\Exe" or "STM3210B-EVAL\Exe" or "STM32L152-EVAL\Exe" folder depending on configuration you selected. + MDK-ARM - Open the SysTick.Uv2 project - In the build toolbar select the project config: - STM3210B-EVAL: to configure the project for STM32 Medium-density devices - STM3210C-EVAL: to configure the project for STM32 Connectivity-Line devices - STM3210E-EVAL: to configure the project for STM32 High-density devices - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices - STM32L152-EVAL: to configure the project for STM32 Low Power Medium-density devices - Rebuild all files: Project->Rebuild all target files - Go to "Utilities\Binary" and run "axftobin.bat" - A binary file "STM3210B-EVAL_SysTick.bin" or "STM3210C-EVAL_SysTick.bin" or "STM3210E-EVAL_SysTick.bin" or "STM32L152-EVAL_SysTick.bin" will be generated under "\Obj" folder. + RIDE - Open the SysTick.rprj project - In the configuration toolbar(Project->properties) select the project config: - STM3210B-EVAL: to configure the project for STM32 Medium-density devices - STM3210C-EVAL: to configure the project for STM32 Connectivity-Line devices - STM3210E-EVAL: to configure the project for STM32 High-density devices - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices - Rebuild all files: Project->build project - Go to "Utilities\Binary" and run "hextobin.bat" - A binary file "SysTick.bin" will be generated under "\STM3210E_EVAL" or "\STM3210C_EVAL" or "\STM3210B_EVAL" or "\STM32L152_EVAL" folder depending on configuration you selected. + HiTOP - Open the HiTOP toolchain, a "using projects in HiTOP" window appears. - Select open an existing project. - Browse to open the SysTick.htp: - under STM32F10B_EVAL directory: to select the project for STM32 Medium-density devices. - under STM32F10C_EVAL directory: to select the project for STM32 Connectivity-Line devices. - under STM32F10E_EVAL directory: to select the project for STM32 High-density devices - under STM32F10E_EVAL_XL directory: to select the project for STM32 XL-density devices - under STM32L152_EVAL directory: to select the project for STM32 Medium-Density Low-Power devices - "Download application" window is displayed, click "cancel". - Rebuild all files: Project->Rebuild all - Go to "Utilities\Binary" directory and