FANUC LADDER-III V8.0最新版

README.TXT File README file for FANUC LADDER-III Copyright(C), FANUC CORPORATION, 2000 - 2017. All Rights Reserved. This document provides the information about "FANUC LADDER-III". Please read this document before using the SOFTWARE. -------------------------------------------------------------------------------- [1] Introduction [2] Outline 2.1 FANUC LADDER-III 2.2 Operation environment 2.3 Product package 2.4 Installation [3] Activation 3.1 Starting the FANUC LADDER-III from the Windows [Programs] menu. [4] Supplementary material 4.1 PMC Function Library 4.2 Ladder template 4.3 Standard symbol file 4.4 Excel files to view the Trace Result [5] History +-------------------------------------------------------------------------------+ |* Microsoft is the registered trademark of Microsoft Corporation. | |* Windows is the trademark of Microsoft Corporation. | |* Other names of companies and products described in this document are the | | (registered) trademarks of each company. | +-------------------------------------------------------------------------------+ ================================================================================ [1] Introduction ================================================================================ This manual describes about "FANUC LADDER-III". As for the detailed explanation, refer to the following operator's manual for the FANUC LADDER-III. "FANUC LADDER-III OPERATOR'S MANUAL B-66234EN" Notes (1) All rights regarding "FANUC LADDER-III", including the copyright shall belong to FANUC CORPORATION. (2) No one can use or copy any part or whole of the software or document of "FANUC LADDER-III" without a prior agreement. ================================================================================ [2] Outline ================================================================================ 2.1 FANUC LADDER-III FANUC LADDER-III is a programming system to develop the sequence program of FANUC PMC. Main functions are shown below. - Off-Line Functions 1) Creating of ladder program 2) Ladder program difference display function 3) PMC address map function 4) Cross-reference display function 5) Printing 6) Command line execution function 7) Step sequence editing 8) Function block function 9) Multi-language PMC message creation tool 10) Checking duplicate coil 11) PMC type change and save 12) Extended symbol/comment function - On-Line Functions 1) Monitoring of ladder 2) Monitoring of signal status 3) Monitoring of PMC status 4) On-Line editing of ladder diagram 5) Signal trace, Signal analysis 6) Signal trace function 7) Mnemonic monitor function 8) Saving and restoring PMC parameter 2.2 Operation environment To use this software, the requirements indicated in the table below must be satisfied. +-------------------+----------------------------------------------------+ | Computer | IBM PC/AT COMPATIBLE | +-------------------+----------------------------------------------------+ | OS | Microsoft Windows 10/8.1/8/7/Vista/XP (Note 1)| +-------------------+----------------------------------------------------+ | CPU | Windows 10 Pro | | | Windows 8.1 Pro | | | Windows 8 Pro | | | Windows 7 Professional | | | Processor recommended by Microsoft | | | 1GHz or more is recommended | | | Windows Vista Home Basic | | | Windows Vista Home Premium | | | Windows Vista Business | | | Windows Vista Ultimate | | | Processor recommended by Microsoft | | | 1GHz or more is recommended | | | Windows XP Home Edition | | | Windows XP Professional | | | Processor recommended by Microsoft | | | 300MHz or more is recommended | +-------------------+----------------------------------------------------+ | Memory | Windows 10 Pro (32-bit/64-bit version) | | | Windows 8.1 Pro (32-bit/64-bit version) | | | Windows 8 Pro (32-bit/64-bit version) | | | Windows 7 Professional (32-bit/64-bit version) | | | 1GByte or more : 32-bit version | | | 2GByte or more : 64-bit version | | | Windows Vista Home Basic | | | 512MBytes or more | | | Windows Vista Home Premium | | | Windows Vista Business | | | Windows Vista Ultimate | | | 1GByte or more | | | Windows XP Home Edition | | | Windows XP Professional | | | 128MBytes or more | +-------------------+----------------------------------------------------+ | Hard disk | 40Mbytes or more free space (Note 2)| +-------------------+----------------------------------------------------+ | Printer | The printers added by the printers settings on | | | Windows. | +-------------------+----------------------------------------------------+ (Note 1) Windows XP and Windows Vista of 64-bit version are not supported. (Note 2) In addition, the space for storing sequence data is required. 2.3 Product package Each product package contains the following. +------------------+--------------+----------------+-----------------------+ | Name |Specification | Component | Remark | +------------------+--------------+----------------+-----------------------+ | FANUC LADDER-III |A08B-9210-J505| CD-ROM disk 1 |Single-user license | | | |(A08B-9210-K505)|for a PC. | +------------------+--------------+ +-----------------------+ | FANUC LADDER-III |A08B-9210-J541| |Multi-user license | | (10 users) | | |for a maximum of 10 PCs| +------------------+--------------+ +-----------------------+ | FANUC LADDER-III |A08B-9210-J542| |Multi-user license for | | (20 users) | | |a maximum of 20 PCs | +------------------+--------------+ +-----------------------+ | FANUC LADDER-III