LVPECL DC CHARACTERISTICS
(1)
(V
CC
= 3.3 V, V
EE
= 0.0 V
(2)
LVPNECL DC CHARACTERISTICS
(1)
(V
EE
= – 3.3 V; V
CC
= 0.0 V;)
(2)
SN65LVEL11
www.ti.com
............................................................................................................................................................................................ SLLS927 – DECEMBER 2008
– 40 ° C 25 ° C 85 ° C
CHARACTERISTICS UNIT
MIN TYP MAX MIN TYP MAX MIN TYP MAX
I
CC
Power Supply Current 20 25 20 25 21 25 mA
V
OH
Output HIGH Voltage
(3)
2215 2420 2215 2286 2420 2215 2420 mV
V
OL
Output LOW Voltage
(3)
1470 1680 1470 1584 1680 1470 1680 mV
V
IH
Input High Voltage (Single-Ended) 2135 2420 2135 2420 2135 2420 mV
V
IL
Input LOW Voltage (Single-Ended) 1490 1825 1490 1825 1490 1825 mV
V
IHCMR
Input HIGH voltage common mode range V
(Differential)
(4)
V
pp
< 500 mV 1.2 3.1 1.1 3.1 1.1 3.1
V
pp
> 500 mV 1.4 3.1 1.3 3.1 1.3 3.1
I
IH
Input HIGH Current 150 150 150 µ A
I
IL
Input LOW current
D 0.5 0.5 0.5 µ A
D – 600 – 600 – 600
(1) Device will meet the specifications after thermal balance has been established when mounted in a socket or printed circuit board with
maintained transverse airflow greater than 500 lfpm. Electrical parameters are assured only over the declared operating temperature
range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied
individually under normal operating conditions and not valid simultaneously.
(2) Input and output parameters vary 1:1 with V
CC
. V
EE
can vary ± 0.3 V
(3) Outputs are terminated through a 50 Ω resistor to V
CC
– 2.0 V.
(4) V
IHCMR
min varies 1:1 with V
EE
, V
IHCMR
max varies 1:1 with V
CC
. The V
IHCMR
range is referenced to the most positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies
between V
PP
min and 1 V.
– 40 ° C 25 ° C 85 ° C
CHARACTERISTICS UNIT
MIN TYP MAX MIN TYP MAX MIN TYP MAX
I
EE
Power supply current 20 25 20 25 21 25 mA
V
OH
Output HIGH voltage
(3)
– 1085 – 880 – 1085 – 1013 – 880 – 1085 – 880 mV
V
OL
Output LOW voltage
(3)
– 1830 – 1620 – 1830 – 1722 – 1620 – 1830 – 1620 mV
V
IH
Input high voltage (Single-Ended) – 1165 – 880 – 1165 – 880 – 1165 – 880 mV
V
IL
Input LOW voltage (Single-Ended) – 1810 – 1475 – 1810 – 1475 – 1810 – 1475 mV
V
IHCMR
Input HIGH voltage common mode range V
(Differential)
(4)
V
pp
< 500 mV – 2.1 – 0.2 – 2.2 – 0.2 – 2.2 – 0.2
V
pp
> 500 mV – 1.9 – 0.2 – 2.0 – 0.2 – 2.0 – 0.2
I
IH
Input HIGH current 150 150 150 µ A
I
IL
Input LOW current
D 0.5 0.5 0.5 µ A
D – 600 – 600 – 600
(1) Device will meet the specifications after thermal balance has been established when mounted in a socket or printed circuit board with
maintained transverse airflow greater than 500 lfpm. Electrical parameters are assured only over the declared operating temperature
range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied
individually under normal operating conditions and not valid simultaneously.
(2) Input and output parameters vary 1:1 with V
CC
. V
EE
can vary ± 0.3 V.
(3) Outputs are terminated through a 50 Ω resistor to V
CC
– 2.0 V.
(4) VIHCMR min varies 1:1 with V
EE
, V
IHCMR
max varies 1:1 with V
CC
. The V
IHCMR
range is referenced to the most positive side of the
differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies
between VPP min and 1 V.
Copyright © 2008, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): SN65LVEL11
评论0
最新资源