PassMark (R) BurnInTest (TM) V8.1
Copyright (C) 1999-2017 PassMark Software
All Rights Reserved
http://www.passmark.com
Overview
========
Passmark's BurnInTest is a software tool that allows all
the major sub-systems of a computer to be simultaneously
tested for reliability and stability.
<For more details see the online help>
Installation
============
1) Uninstall any previous version of BurnInTest
2) Double click (or Open) the downloaded ".exe" file
3) Follow the prompts
UnInstallation
==============
Use the Windows control panel, Add / Remove Programs
Requirements
============
- Operating System: Windows XP SP3, Windows Vista, Windows 7, Windows 8,
2003 Server, 2008 Server, 2008 R2 Server, 2012 Server, 2012 R2 Server,
Windows 10 Technical preview (*)
- CPU: CPU support (e.g. SSE2) is required in order to run the CPU tests for
those specific instructions (e.g. SSE2).
- GPU: DirectX 9.0c or above software for 3D graphics, video and webcam tests
(plus working DirectX drivers for your video card). DirectX 11 support
required for the GPGPU tests with DirectCompute compatible GPU.
- RAM: 256MB
- Disk space: 40MB of free hard disk space (plus free space for the Disk test).
- A printer to run the printer test, set-up as the default printer in Windows.
- A CD ROM + 1 Music CD or Data CD to run the CD test.
- A CD-RW to run the CD burn test.
- A DVD-RW or DVD+RW to run the DVD burn test.
- A network connection and the TCP/IP networking software installed for the
Network Tests
Pro version only:
- A serial port loop back plug for the serial port test.
- A parallel port loop back plug for the parallel port test.
- A USB 2.0 port loop back plug for the USB 2.0 port test.
- A USB 3.0 port loop back plug for the USB 3.0 port test.
- A webcam is required for the webcam test.
- A battery is required for the battery test.
- A microphone is required for the microphone test.
- A PassMark PCIe 2.0 loopback card for the PCIe test.
- PassMark KeyboardTest V2.2 1011 (or higher) for Plugin Keyboard testing.
- PassMark MonitorTest V3.1 1000 (or higher) for Plugin Monitor testing.
(*)Operating System compatibility notes:
- BurnInTest must be run with administrator privileges. It requires
elevated administrator privileges in Windows Vista (and later).
- The Standard and Torture RAM tests are available on all operating systems.
The Address Windowing Extensions test mode is only available under operating
systems where you can lock memory pages into memory, such as Windows XP
Professional.
- The CD and DVD burn tests require Windows Vista (and later), IMAPI v2 patched
Windows XP or IMAPI v2 patched Windows 2003 Server.
- The Bluetooth test is available on Windows workstations, Windows XP SP3 and
later, Windows Vista, Windows 7 and Windows 8.
- The GPGPU test requires Windows 7 or later.
- To monitor and report WHEA errors (like corrected ECC memory errors), Windows
7/ Windows 2008 R2 or later is required. Also the system must support WHEA
logging of hardware events in the CPER (Common Platform Error Reports) format.
- Windows XP SP2 and earlier are not supported by BurnInTest version 8.0.
Use BurnInTest v6.0 for compatibility with Windows 2000 and Windows XP SP2
(and earlier).
Use BurnInTest v5.2 for compatibility with Windows 98 and Windows ME.
Version History
===============
Here is a summary of all changes that have been made in each version of
BurnInTest.
Release 8.1 build 1022 - 3 April 2017
- Applied USB Timeout set in USB preferences to USB3 benchmark test
- Fixed a missing default config file error message at startup
- Fixed a crash that could occur during system information collection in 32bit
- Fixed a bug causing a manual stop to be treated as automatic when running a script and using the toolbar stop button
Release 8.1 build 1021 - 17 March 2017
- Added syncronization to the USB3 test threads (plugs begin with benchmark read, when all plugs finished the benchmark read test, they will start benchmark write, and then loopback test)
- USB3 test threads will wait for all plugs to enumerate and get ready before beginning loopback and benchmark tests
- Increased USB3 plug reenumeration timeout from 5 to 10 seconds
- Added "Ignore USB recoverable failures" to the USB configuration tab
Release 8.1 build 1020 - 23 December 2016
- Changed "Operating system" in the HTML customer certificate to "Test operating system" and will only print customer and technician fields if they are filled in
- Enabled 8b/10b error reporting in USB3 test
- Made some changes to better track when USB3 devices are connected or disconnected (eg forced disconnection by error) during testing
- Fixed a possible 32bit overflow error when displaying the sent and received byte count for USB3 test operations
- Fixed a USB3 issue when device is enumerated due to high number of link layer errors (more than 64 link layer errors per 100msec)
- Fixed a bug in USB2 test where inbuffer/outbuffer was overwritten by IOCTL_EZUSB_GET_LAST_ERROR after read/write failure which caused some trace logging inconsistencies
- Fixed a scripting bug where numbers with decimal points were not being parsed correctly (like disk test file size)
Release 8.1 build 1019 - 25 October 2016
- Now properly signalling a manual stop to the script so post test actions will be followed correctly, previously all stops during a script were treated as "Automatic"
- Fixed a bug when USB3 plug fails benchmark mode in USB high-speed mode, this could cause an error if using the USB3 plugs on a USB2 port when the test switched from benchmark to loopback
- Reduced the amount of time the 2D test will wait between tests when on a low duty cycles
- Fixed a window redraw issue where the 2D lines and bitmaps test was not always updating correctly after the lines test on some systems
- Fixed some display issues (wrong hard drive letter shown) sometime when a test config was created from default or moved between system with different disk setups
Release 8.1 build 1018 - 8 August 2016
- Fixed a bug with detecting and starting serial port tests when running in WinPE on some systems
- Changed the behaviour of the raw disk test when running in WinPE to be the same as running in a full version of Windows, now the RAW disk test will run on a disk that contains partitions unless there are windows files detected.
- Fixed a possible long wait for system information sometimes when launching BurnInTest
Release 8.1 build 1017 - 21 July 2016
- Fixed a bug where the USB error count could be reset during a test cycle
- Fixed a bug when scripting multiple reboots was not always processing each reboot correctly
- Changed the "Butterfly test skipped" warning message to information level so it is logged but not counted as a warning
- Changed the default sample period for temperature collection to 10 seconds (from 1 second). This can prevent crashes on some systems where frequent temperature polling can cause a device driver crash.
Release 8.1 build 1016 - 20 June 2016
- Added a benchmark test phase for USB3 as part of the test
- Added USB3 low level error reporting to the trace level log
- Added new error message to 2D test when EMC + test pattern test is selected and only 1 monitor is present
- Added OBEX FTP transfer type to bluetooth test
- Made some changes to disk test to skip butterfly test when running Cylic pattern and an SSD is detected
- Now filtering "Bluetooth" named network cards from "All available ethernet" and "All available 802.11" network test options
- Added "Microsoft Virtual" to list of filtered out adapter form network test to account for "Microsoft Virtual WiFi Miniport Adapter" and "Microsoft Virtual WiFi Miniport Adapter"
- Fixed a bug where the advanced net test window was not updating the statistics when runn
没有合适的资源?快使用搜索试试~ 我知道了~
资源推荐
资源详情
资源评论
收起资源包目录
笔记本等软件机器日常使用测试工具 (2000个子文件)
LastUsed.bitcfg 76KB
8-Pink.bmp 1.76MB
5-Yellow.bmp 1.76MB
1-Black.bmp 1.76MB
3-Grey.bmp 1.76MB
7-Blue.bmp 1.76MB
2-White.bmp 1.76MB
6-Green.bmp 1.76MB
9-Cyan.bmp 1.76MB
4-Red.bmp 1.76MB
cab1.cab 206.63MB
WirelessNetView.cfg 723B
ATTODiskBenchmark.chm 35KB
WirelessNetView.chm 16KB
CPUFUNALL.cmd 461B
Camera.cmd 276B
Camera.cmd 276B
AForgeCamera.exe.config 278B
default.css 4KB
Graph.css 2KB
default.css 1020B
09.csv 11KB
08.csv 11KB
06.csv 11KB
07.csv 11KB
HostWrites.csv 9KB
0A.csv 9KB
HostReads.csv 9KB
PowerOnHours.csv 9KB
0C.csv 9KB
0B.csv 9KB
PowerOnCount.csv 9KB
0F.csv 9KB
02.csv 9KB
03.csv 9KB
Temperature.csv 9KB
Life.csv 9KB
04.csv 9KB
0D.csv 9KB
HealthStatus.csv 8KB
SpareBlock.csv 8KB
05.csv 8KB
11.csv 8KB
ReallocatedSectorsCount.csv 8KB
0E.csv 8KB
13.csv 8KB
01.csv 8KB
FlashWrites.csv 8KB
12.csv 8KB
10.csv 8KB
F2.csv 644B
F1.csv 624B
F5.csv 622B
09.csv 598B
A4.csv 598B
A8.csv 598B
PowerOnHours.csv 598B
E8.csv 575B
C0.csv 575B
PowerOnCount.csv 575B
0C.csv 575B
A9.csv 575B
A1.csv 575B
SpareBlock.csv 575B
A5.csv 553B
Temperature.csv 552B
C2.csv 552B
C3.csv 536B
A7.csv 530B
AverageEraseCount.csv 530B
UncorrectableSectorCount.csv 529B
B0.csv 529B
C4.csv 529B
C7.csv 529B
CurrentPendingSectorCount.csv 529B
ReallocatedSectorsCount.csv 529B
A6.csv 529B
ReallocationEventCount.csv 529B
B6.csv 529B
AF.csv 529B
B5.csv 529B
B1.csv 529B
01.csv 529B
FlashWrites.csv 529B
C5.csv 529B
C6.csv 529B
B2.csv 529B
A3.csv 529B
A0.csv 529B
05.csv 529B
07.csv 248B
BE.csv 248B
01.csv 246B
B4.csv 241B
B5.csv 240B
C2.csv 232B
09.csv 216B
PowerOnHours.csv 216B
E1.csv 216B
04.csv 209B
共 2000 条
- 1
- 2
- 3
- 4
- 5
- 6
- 20
资源评论
光头程序猿哦
- 粉丝: 1
- 资源: 3
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功