天猫魔盒tmb100精简系统原生初代

#AP6181_NVRAM_V1.1_01152013 #adjuest PA parameter for g/n mode manfid=0x2d0 prodid=0x492 vendid=0x14e4 devid=0x4343 boardtype=0x0598 # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305 boardrev=0x1307 boardnum=777 xtalfreq=26000 boardflags=0xa00 sromrev=3 wl0id=0x431b macaddr=00:90:4c:07:71:12 aa2g=1 ag0=2 maxp2ga0=74 cck2gpo=0x2222 ofdm2gpo=0x66666666 mcs2gpo0=0x7777 mcs2gpo1=0x7777 pa0maxpwr=56 #P207 PA params #pa0b0=5447 #pa0b1=-658 #pa0b2=-175<div></div> #Same PA params for P304,P305, P306, P307 pa0b0=5447 pa0b1=-607 pa0b2=-160 pa0itssit=62 pa1itssit=62 cckPwrOffset=5 ccode=0 rssismf2g=0xa rssismc2g=0x3 rssisav2g=0x7 triso2g=0 noise_cal_enable_2g=0 noise_cal_po_2g=0 swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff temp_add=29767 temp_mult=425