jansson-2.12.tar.gz

# Notes: # # Author: Paul Harris, June 2012 # Additions: Joakim Soderberg, Febuary 2013 # # Supports: building static/shared, release/debug/etc, can also build html docs # and some of the tests. # Note that its designed for out-of-tree builds, so it will not pollute your # source tree. # # TODO 1: Finish implementing tests. api tests are working, but the valgrind # variants are not flagging problems. # # TODO 2: There is a check_exports script that would try and incorporate. # # TODO 3: Consolidate version numbers, currently the version number is written # into: * cmake (here) * autotools (the configure) * source code header files. # Should not be written directly into header files, autotools/cmake can do # that job. # # Brief intro on how to use cmake: # > mkdir build (somewhere - we do out-of-tree builds) # > use cmake, ccmake, or cmake-gui to configure the project. for linux, you # can only choose one variant: release,debug,etc... and static or shared. # >> example: # >> cd build # >> ccmake -i ../path_to_jansson_dir # >> inside, configure your options. press C until there are no lines # with * next to them. # >> note, I like to configure the 'install' path to ../install, so I get # self-contained clean installs I can point other projects to. # >> press G to 'generate' the project files. # >> make (to build the project) # >> make install # >> make test (to run the tests, if you enabled them) # # Brief description on how it works: # There is a small heirachy of CMakeLists.txt files which define how the # project is built. # Header file detection etc is done, and the results are written into config.h # and jansson_config.h, which are generated from the corresponding # config.h.cmake and jansson_config.h.cmake template files. # The generated header files end up in the build directory - not in # the source directory. # The rest is down to the usual make process. cmake_minimum_required (VERSION 3.1) project(jansson C) # Options option(JANSSON_BUILD_SHARED_LIBS "Build shared libraries." OFF) option(USE_URANDOM "Use /dev/urandom to seed the hash function." ON) option(USE_WINDOWS_CRYPTOAPI "Use CryptGenRandom to seed the hash function." ON) if (MSVC) # This option must match the settings used in your program, in particular if you # are linking statically option(JANSSON_STATIC_CRT "Link the static CRT libraries" OFF ) endif () option(JANSSON_EXAMPLES "Compile example applications" ON) if (UNIX) option(JANSSON_COVERAGE "(GCC Only! Requires gcov/lcov to be installed). Include target for doing coverage analysis for the test suite. Note that -DCMAKE_BUILD_TYPE=Debug must be set" OFF) option(JANSSON_COVERALLS "Generate coverage info for Coveralls" OFF) option(JANSSON_COVERALLS_UPLOAD "Upload coverage info to Coveralls (Only works via Travis)" ON) endif () # Set some nicer output dirs. set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/bin) set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/lib) set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/lib) set(JANSSON_TEMP_DIR ${CMAKE_CURRENT_BINARY_DIR}/tmp) # Give the debug version a different postfix for windows, # so both the debug and release version can be built in the # same build-tree on Windows (MSVC). if (WIN32 AND NOT CMAKE_DEBUG_POSTFIX) set(CMAKE_DEBUG_POSTFIX "_d") endif() # This is how I thought it should go # set (JANSSON_VERSION "2.3.1") # set (JANSSON_SOVERSION 2) set(JANSSON_DISPLAY_VERSION "2.12") # This is what is required to match the same numbers as automake's set(JANSSON_VERSION "4.11.1") set(JANSSON_SOVERSION 4) # for CheckFunctionKeywords set(CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake") include (CheckCSourceCompiles) include (CheckFunctionExists) include (CheckFunctionKeywords) include (CheckIncludeFiles) include (CheckTypeSize) if (MSVC) # Turn off Microsofts "security" warnings. add_definitions( "/W3 /D_CRT_SECURE_NO_WARNINGS /wd4005 /wd4996 /nologo" ) if (JANSSON_STATIC_CRT) set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} /MT") set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} /MTd") endif() endif() message("C compiler: ${CMAKE_C_COMPILER_ID}") # Coverage only works with GCC for a debug build. if (JANSSON_COVERALLS) set(JANSSON_COVERAGE ON) endif() if (JANSSON_COVERAGE) include(CodeCoverage) include(Coveralls) # This adds coverage arguments to gcc/clang. coveralls_turn_on_coverage() endif() check_include_files (endian.h HAVE_ENDIAN_H) check_include_files (fcntl.h HAVE_FCNTL_H) check_include_files (sched.h HAVE_SCHED_H) check_include_files (unistd.h HAVE_UNISTD_H) check_include_files (sys/param.h HAVE_SYS_PARAM_H) check_include_files (sys/stat.h HAVE_SYS_STAT_H) check_include_files (sys/time.h HAVE_SYS_TIME_H) check_include_files (sys/types.h HAVE_SYS_TYPES_H) check_function_exists (close HAVE_CLOSE) check_function_exists (getpid HAVE_GETPID) check_function_exists (gettimeofday HAVE_GETTIMEOFDAY) check_function_exists (open HAVE_OPEN) check_function_exists (read HAVE_READ) check_function_exists (sched_yield HAVE_SCHED_YIELD) # Check for the int-type includes check_include_files (stdint.h HAVE_STDINT_H) # Check our 64 bit integer sizes check_type_size (__int64 __INT64) check_type_size (int64_t INT64_T) check_type_size ("long long" LONG_LONG_INT) # Check our 32 bit integer sizes check_type_size (int32_t INT32_T) check_type_size (__int32 __INT32) check_type_size ("long" LONG_INT) check_type_size ("int" INT) if (HAVE_INT32_T) set (JSON_INT32 int32_t) elseif (HAVE___INT32) set (JSON_INT32 __int32) elseif (HAVE_LONG_INT AND (LONG_INT EQUAL 4)) set (JSON_INT32 long) elseif (HAVE_INT AND (INT EQUAL 4)) set (JSON_INT32 int) else () message (FATAL_ERROR "Could not detect a valid 32-bit integer type") endif () check_type_size ("unsigned long" UNSIGNED_LONG_INT) check_type_size ("unsigned int" UNSIGNED_INT) check_type_size ("unsigned short" UNSIGNED_SHORT) check_type_size (uint32_t UINT32_T) check_type_size (__uint32 __UINT32) if (HAVE_UINT32_T) set (JSON_UINT32 uint32_t) elseif (HAVE___UINT32) set (JSON_UINT32 __uint32) elseif (HAVE_UNSIGNED_LONG_INT AND (UNSIGNED_LONG_INT EQUAL 4)) set (JSON_UINT32 "unsigned long") elseif (HAVE_UNSIGNED_INT AND (UNSIGNED_INT EQUAL 4)) set (JSON_UINT32 "unsigned int") else () message (FATAL_ERROR "Could not detect a valid unsigned 32-bit integer type") endif () check_type_size (uint16_t UINT16_T) check_type_size (__uint16 __UINT16) if (HAVE_UINT16_T) set (JSON_UINT16 uint16_t) elseif (HAVE___UINT16) set (JSON_UINT16 __uint16) elseif (HAVE_UNSIGNED_INT AND (UNSIGNED_INT EQUAL 2)) set (JSON_UINT16 "unsigned int") elseif (HAVE_UNSIGNED_SHORT AND (UNSIGNED_SHORT EQUAL 2)) set (JSON_UINT16 "unsigned short") else () message (FATAL_ERROR "Could not detect a valid unsigned 16-bit integer type") endif () check_type_size (uint8_t UINT8_T) check_type_size (__uint8 __UINT8) if (HAVE_UINT8_T) set (JSON_UINT8 uint8_t) elseif (HAVE___UINT8) set (JSON_UINT8 __uint8) else () set (JSON_UINT8 "unsigned char") endif () # Check for ssize_t and SSIZE_T existance. check_type_size(ssize_t SSIZE_T) check_type_size(SSIZE_T UPPERCASE_SSIZE_T) if(NOT HAVE_SSIZE_T) if(HAVE_UPPERCASE_SSIZE_T) set(JSON_SSIZE SSIZE_T) else() set(JSON_SSIZE int) endif() endif() set(CMAKE_EXTRA_INCLUDE_FILES "") # Check for all the variants of strtoll check_function_exists (strtoll HAVE_STRTOLL) check_function_exists (strtoq HAVE_STRTOQ) check_function_exists (_strtoi64 HAVE__STRTOI64) # Figure out what variant we should use if (HAVE_STRTOLL) set (JSON_STRTOINT strtoll) elseif (HAVE_STRTOQ) set (JSON_STRTOINT strtoq) elseif (HAVE__STRTOI64) set (JSON_STRTOINT _strtoi64) else () # fallback to strtol (32 bit) # this will set all the required variables set (JSON_STRTOINT strtol) set (JSON_INT_T long) set (JSON_INTEGER_FORMAT "\"ld\"") endif () # if we haven't defined JSON