基于ZigBee的无线ECG心电采集诊断系统（硬件设计+软件源码+论文）

/************************************************************************************************** Filename: SimpleCollector.c Revised: $Date: 2008-04-03 11:05:31 -0700 (Thu, 03 Apr 2008) $ Revision: $Revision: 16711 $ Description: Sample application utilizing the Simple API. Copyright 2007 Texas Instruments Incorporated. All rights reserved. IMPORTANT: Your use of this Software is limited to those specific rights granted under the terms of a software license agreement between the user who downloaded the software, his/her employer (which must be your employer) and Texas Instruments Incorporated (the "License"). You may not use this Software unless you agree to abide by the terms of the License. The License limits your use, and you acknowledge, that the Software may not be modified, copied or distributed unless embedded on a Texas Instruments microcontroller or used solely and exclusively in conjunction with a Texas Instruments radio frequency transceiver, which is integrated into your product. Other than for the foregoing purpose, you may not use, reproduce, copy, prepare derivative works of, modify, distribute, perform, display or sell this Software and/or its documentation for any purpose. YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE PROVIDED 揂S IS?WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS. Should you have any questions regarding your right to use this Software, contact Texas Instruments Incorporated at www.TI.com. **************************************************************************************************/ /****************************************************************************** * INCLUDES */ #include "ZComDef.h" #include "OSAL.h" #include "sapi.h" #include "hal_key.h" #include "hal_led.h" #include "DebugTrace.h" #include "SimpleApp.h" #include "hal_uart.h" #include "hal_lcd.h" #include "stdio.h" #include "string.h" #include "hal_board_cfg.h" //@diy /********************************************************************* * CONSTANTS */ // Application States #define APP_INIT 0 #define APP_START 1 // Application osal event identifiers #define MY_START_EVT 0x0001 // Same definitions as in SimpleSensor.c #define VOLTAGE_REPORT1 0x02 /********************************************************************* * TYPEDEFS */ /********************************************************************* * LOCAL VARIABLES */ static uint8 myAppState = APP_INIT; static uint8 myStartRetryDelay = 10; /********************************************************************* * GLOBAL VARIABLES */ // Inputs and Outputs for Collector device #define NUM_OUT_CMD_COLLECTOR 0 #define NUM_IN_CMD_COLLECTOR 1 // List of output and input commands for Collector device const cId_t zb_InCmdList[NUM_IN_CMD_COLLECTOR] = { SENSOR_REPORT_CMD_ID }; // Define SimpleDescriptor for Collector device const SimpleDescriptionFormat_t zb_SimpleDesc = { MY_ENDPOINT_ID, // Endpoint MY_PROFILE_ID, // Profile ID DEV_ID_COLLECTOR, // Device ID DEVICE_VERSION_COLLECTOR, // Device Version 0, // Reserved NUM_IN_CMD_COLLECTOR, // Number of Input Commands (cId_t *) zb_InCmdList, // Input Command List NUM_OUT_CMD_COLLECTOR, // Number of Output Commands (cId_t *) NULL // Output Command List }; #define CLKSPD ( CLKCONCMD & 0x03 ) //系统时钟速率 虽然会与hal_mcu.h 中的文件打架，但还能用 /* 串行UART 配置 */ #define HIGH_STOP 0x02 #define LOW_STOP 0x00 #define HIGH_START 0x01 #define TRANSFER_MSB_FIRST 0x80 #define TRANSFER_MSB_LAST 0x00 #define FLOW_CONTROL_ENABLE 0x40 #define UART_ENABLE_RECEIVE 0x40 #define IO_PER_LOC_USART0_AT_PORT0_PIN2345() \ do { PERCFG = (PERCFG&~0x01)|0x00; } while (0) /* 串行UART_E设置 */ #define BAUD_E(baud, clkDivPow) ( \ (baud==2400) ? 6 +clkDivPow : \ (baud==4800) ? 7 +clkDivPow : \ (baud==9600) ? 8 +clkDivPow : \ (baud==14400) ? 8 +clkDivPow : \ (baud==19200) ? 9 +clkDivPow : \ (baud==28800) ? 9 +clkDivPow : \ (baud==38400) ? 10 +clkDivPow : \ (baud==57600) ? 10 +clkDivPow : \ (baud==76800) ? 11 +clkDivPow : \ (baud==115200) ? 11 +clkDivPow : \ (baud==153600) ? 12 +clkDivPow : \ (baud==230400) ? 12 +clkDivPow : \ (baud==307200) ? 13 +clkDivPow : \ 0 ) /* 串行UART_M设置 */ #define BAUD_M(baud) ( \ (baud==2400) ? 59 : \ (baud==4800) ? 59 : \ (baud==9600) ? 59 : \ (baud==14400) ? 216 : \ (baud==19200) ? 59 : \ (baud==28800) ? 216 : \ (baud==38400) ? 59 : \ (baud==57600) ? 216 : \ (baud==76800) ? 59 : \ (baud==115200) ? 216 : \ (baud==153600) ? 59 : \ (baud==230400) ? 216 : \ (baud==307200) ? 59 : \ 0) /* 串行UART设置 */ #define UART_SETUP(uart, baudRate, options) \ do { \ if ((options) & FLOW_CONTROL_ENABLE){ \ if((uart) == 0){ /* USART0 */\ if(PERCFG & 0x01){ /* Alt 2 */\ P1SEL |= 0x3C; \ } else { /* Alt 1 */\ P0SEL |= 0x3C; \ } \ } \ else { /* USART1 */\ if(PERCFG & 0x02){ /* Alt 2 */\ P1SEL |= 0xF0; \ } else { /* Alt 1 */\ P0SEL |= 0x3C; \ } \ } \ } \ else{ /* 流控不时能 */ \ if((uart) == 0){ /* USART0 */\ if(PERCFG & 0x01){ /* Alt 2 */\ P1SEL |= 0x30; \ } else { /* Alt 1 */\ P0SEL |= 0x0C; \ } \ } \ else { /* USART1 */\ if(PERCFG & 0x02){ /* Alt 2 */\ P1SEL |= 0xC0; \ } else { /* Alt 1 */\ P0SEL |= 0x30; \ } \ } \ } \ \ U##uart##GCR = BAUD_E((baudRate), CLKSPD); \ U##uart##BAUD = BAUD_M(baudRate); \ \ U##uart##CSR |= 0x80;