#include <linux/module.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/sound.h>
#include <linux/soundcard.h>
#include <linux/pm.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/semaphore.h>
#include <asm/dma.h>
#include <asm/arch/dma.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-iis.h>
#include <asm/arch/regs-clock.h>
#include <linux/dma-mapping.h>
#include <asm/dma-mapping.h>
#include <asm/arch/hardware.h>
#include <asm/arch/map.h>
#define PFX "s3c2410-uda1341-superlp: "
#define MAX_DMA_CHANNELS 0
/* The S3C2410 has four internal DMA channels. */
#define MAX_S3C2410_DMA_CHANNELS S3C2410_DMA_CHANNELS
#define DMA_BUF_WR 1
#define DMA_BUF_RD 0
#define dma_wrreg(chan, reg, val) __raw_writel((val), (chan)->regs + (reg))
static struct clk *iis_clock;
static void __iomem *iis_base;
static struct s3c2410_dma_client s3c2410iis_dma_out= {
.name = "I2SSDO",
};
static struct s3c2410_dma_client s3c2410iis_dma_in = {
.name = "I2SSDI",
};
#ifdef DEBUG
#define DPRINTK printk
#else
#define DPRINTK( x... )
#endif
static void init_s3c2410_iis_bus_rx(void);
static void init_s3c2410_iis_bus_tx(void);
#define DEF_VOLUME 65
/* UDA1341 Register bits */
#define UDA1341_ADDR 0x14
#define UDA1341_REG_DATA0 (UDA1341_ADDR + 0)
#define UDA1341_REG_STATUS (UDA1341_ADDR + 2)
/* status control */
#define STAT0 (0x00)
#define STAT0_RST (1 << 6)
#define STAT0_SC_MASK (3 << 4)
#define STAT0_SC_512FS (0 << 4)
#define STAT0_SC_384FS (1 << 4)
#define STAT0_SC_256FS (2 << 4)
#define STAT0_IF_MASK (7 << 1)
#define STAT0_IF_I2S (0 << 1)
#define STAT0_IF_LSB16 (1 << 1)
#define STAT0_IF_LSB18 (2 << 1)
#define STAT0_IF_LSB20 (3 << 1)
#define STAT0_IF_MSB (4 << 1)
#define STAT0_IF_LSB16MSB (5 << 1)
#define STAT0_IF_LSB18MSB (6 << 1)
#define STAT0_IF_LSB20MSB (7 << 1)
#define STAT0_DC_FILTER (1 << 0)
#define STAT0_DC_NO_FILTER (0 << 0)
#define STAT1 (0x80)
#define STAT1_DAC_GAIN (1 << 6) /* gain of DAC */
#define STAT1_ADC_GAIN (1 << 5) /* gain of ADC */
#define STAT1_ADC_POL (1 << 4) /* polarity of ADC */
#define STAT1_DAC_POL (1 << 3) /* polarity of DAC */
#define STAT1_DBL_SPD (1 << 2) /* double speed playback */
#define STAT1_ADC_ON (1 << 1) /* ADC powered */
#define STAT1_DAC_ON (1 << 0) /* DAC powered */
/* data0 direct control */
#define DATA0 (0x00)
#define DATA0_VOLUME_MASK (0x3f)
#define DATA0_VOLUME(x) (x)
#define DATA1 (0x40)
#define DATA1_BASS(x) ((x) << 2)
#define DATA1_BASS_MASK (15 << 2)
#define DATA1_TREBLE(x) ((x))
#define DATA1_TREBLE_MASK (3)
#define DATA2 (0x80)
#define DATA2_PEAKAFTER (0x1 << 5)
#define DATA2_DEEMP_NONE (0x0 << 3)
#define DATA2_DEEMP_32KHz (0x1 << 3)
#define DATA2_DEEMP_44KHz (0x2 << 3)
#define DATA2_DEEMP_48KHz (0x3 << 3)
#define DATA2_MUTE (0x1 << 2)
#define DATA2_FILTER_FLAT (0x0 << 0)
#define DATA2_FILTER_MIN (0x1 << 0)
#define DATA2_FILTER_MAX (0x3 << 0)
/* data0 extend control */
#define EXTADDR(n) (0xc0 | (n))
#define EXTDATA(d) (0xe0 | (d))
#define EXT0 0
#define EXT0_CH1_GAIN(x) (x)
#define EXT1 1
#define EXT1_CH2_GAIN(x) (x)
#define EXT2 2
#define EXT2_MIC_GAIN_MASK (7 << 2)
#define EXT2_MIC_GAIN(x) ((x) << 2)
#define EXT2_MIXMODE_DOUBLEDIFF (0)
#define EXT2_MIXMODE_CH1 (1)
#define EXT2_MIXMODE_CH2 (2)
#define EXT2_MIXMODE_MIX (3)
#define EXT4 4
#define EXT4_AGC_ENABLE (1 << 4)
#define EXT4_INPUT_GAIN_MASK (3)
#define EXT4_INPUT_GAIN(x) ((x) & 3)
#define EXT5 5
#define EXT5_INPUT_GAIN(x) ((x) >> 2)
#define EXT6 6
#define EXT6_AGC_CONSTANT_MASK (7 << 2)
#define EXT6_AGC_CONSTANT(x) ((x) << 2)
#define EXT6_AGC_LEVEL_MASK (3)
#define EXT6_AGC_LEVEL(x) (x)
#define AUDIO_NAME "UDA1341"
#define AUDIO_NAME_VERBOSE "UDA1341 audio driver"
#define AUDIO_FMT_MASK (AFMT_S16_LE)
#define AUDIO_FMT_DEFAULT (AFMT_S16_LE)
#define AUDIO_CHANNELS_DEFAULT 2
#define AUDIO_RATE_DEFAULT 44100
#define AUDIO_NBFRAGS_DEFAULT 8
#define AUDIO_FRAGSIZE_DEFAULT 8192
#define S_CLOCK_FREQ 384
#define PCM_ABS(a) (a < 0 ? -a : a)
typedef struct {
int size; /* buffer size */
char *start; /* point to actual buffer */
dma_addr_t dma_addr; /* physical buffer address */
struct semaphore sem; /* down before touching the buffer */
int master; /* owner for buffer allocation, contain size when true */
} audio_buf_t;
typedef struct {
audio_buf_t *buffers; /* pointer to audio buffer structures */
audio_buf_t *buf; /* current buffer used by read/write */
u_int buf_idx; /* index for the pointer above */
u_int fragsize; /* fragment i.e. buffer size */
u_int nbfrags; /* nbr of fragments */
dmach_t dma_ch; /* DMA channel (channel2 for audio) */
u_int dma_ok;
} audio_stream_t;
static audio_stream_t output_stream;
static audio_stream_t input_stream; /* input */
#define NEXT_BUF(_s_,_b_) { \
(_s_)->_b_##_idx++; \
(_s_)->_b_##_idx %= (_s_)->nbfrags; \
(_s_)->_b_ = (_s_)->buffers + (_s_)->_b_##_idx; }
static u_int audio_rate;
static int audio_channels;
static int audio_fmt;
static u_int audio_fragsize;
static u_int audio_nbfrags;
static int audio_rd_refcount;
static int audio_wr_refcount;
#define audio_active (audio_rd_refcount | audio_wr_refcount)
static int audio_dev_dsp;
static int audio_dev_mixer;
static int audio_mix_modcnt;
static int uda1341_volume;
//static u8 uda_sampling;
static int uda1341_boost;
static int mixer_igain=0x4; /* -6db*/
static void uda1341_l3_address(u8 data)
{
int i;
unsigned long flags;
local_irq_save(flags);
// write_gpio_bit(GPIO_L3MODE, 0);
s3c2410_gpio_setpin(S3C2410_GPB2,0);
// write_gpio_bit(GPIO_L3CLOCK, 1);
s3c2410_gpio_setpin(S3C2410_GPB4,1);
udelay(1);
for (i = 0; i < 8; i++) {
if (data & 0x1) {
s3c2410_gpio_setpin(S3C2410_GPB4,0);
s3c2410_gpio_setpin(S3C2410_GPB3,1);
udelay(1);
s3c2410_gpio_setpin(S3C2410_GPB4,1);
} else {
s3c2410_gpio_setpin(S3C2410_GPB4,0);
s3c2410_gpio_setpin(S3C2410_GPB3,0);
udelay(1);
s3c2410_gpio_setpin(S3C2410_GPB4,1);
}
data >>= 1;
}
s3c2410_gpio_setpin(S3C2410_GPB2,1);
s3c2410_gpio_setpin(S3C2410_GPB4,1);
local_irq_restore(flags);
}
static void uda1341_l3_data(u8 data)
{
int i;
unsigned long flags;
local_irq_save(flags);
udelay(1);
for (i = 0; i < 8; i++) {
if (data & 0x1) {
s3c2410_gpio_setpin(S3C2410_GPB4,0);
s3c2410_gpio_setpin(S3C2410_GPB3,1);
udelay(1);
s3c2410_gpio_setpin(S3C2410_GPB4,1);
} else {
s3c2410_gpio_setpin(S3C2410_GPB4,0);
s3c2410_gpio_setpin(S3C2410_GPB3,0);
udelay(1);
s3c2410_gpio_setpin(S3C2410_GPB4,1);
}
data >>= 1;
}
local_irq_restore(flags);
}
static void audio_clear_buf(audio_stream_t * s)
{
DPRINTK("audio_clear_buf\n");
if(s->dma_ok) s3c2410_dma_ctrl(s->dma_ch, S3C2410_DMAOP_FLUSH);
if (s->buffers) {
int frag;
for (frag = 0; frag < s->nbfrags; frag++) {
if (!s->buffers[frag].master)
continue;
dma_free_coherent(NULL,
s->buffers[frag].master,
s->buffers[frag].start,
s->buffers[frag].dma_addr);
}
kfree(s->buffers);
s->buffers = NULL;
}
s->buf_idx = 0;
s->buf = NULL;
}
static int audio_setup_buf(audio_stream_t * s)
{
int frag;
int dmasize = 0;
char *dmabuf = 0;
dma_addr_t dmaphys = 0;
if (s->buffers)
return -EBUSY;
s->nbfrags = audio_nbfrags;
s->fragsize = audio_fragsize;
s->buffers = (audio_buf_t *)
kmalloc(sizeof(audio_buf_t) * s->nbfrags, GFP_KERNEL);
if (!s->buffers)
goto err;
memset(s->buffers, 0, sizeof(audio_buf_t) * s->nbfrags);
for (frag = 0; frag < s->nbfrags; frag++) {
audio_buf_t *b = &s->buffers[frag];
if (!dmasize) {
dmasize = (s->nbfrags - frag) * s->fragsize;
do {
dmabuf = dma_alloc_coherent(NULL, dmasize, &dmaphys, GFP_KERNEL|GFP_DMA);
if (!dmabuf)
dmasize -= s->fragsize;
} while (!dmabuf && dmasize);
if (!