voga.zip_MC9RS08LE4_lcd 5 digits_voga_www.voga.c

============================================================================= List of generated methods in project: le4 THIS TEXT DESCRIPTION IS GENERATED BY THE TOOL. DO NOT MODIFY IT. ============================================================================= Module "LCD1" (bean Init_LCD_RS08) - LCD1_Init -This method initializes registers of the LCD module according to this Peripheral Initialization Bean settings. Call this method in the user code to initialize the module. By default, the method is called by PE automatically; see "Call Init method" property of the bean for more details. Module "AD1" (bean ADC) - AD1_Measure -This method performs one measurement on all channels that are set in the bean inspector. (Note: If the <number of conversions> is more than one the conversion of A/D channels is performed specified number of times.) - AD1_GetValue -Returns the last measured values for all channels. Format and width of the value is a native format of the A/D converter. Module "SENSOR" (bean BitIO) - SENSOR_GetVal -Returns the input/output value. If the direction is [input] then the input value of the pin is read and returned. If the direction is [output] then the last written value is returned (see <Safe mode> property for limitations). - SENSOR_PutVal -The specified output value is set. If the direction is [input], the bean saves the value to a memory or a register and this value will be written to the pin after switching to the output mode (using [SetDir(TRUE)]; see <Safe mode> property for limitations). If the direction is [output], it writes the value to the pin. (Method is available only if the direction = _[output]_ or _[input/output]_). - SENSOR_ClrVal -Clears (set to zero) the output value. It is equivalent to the [PutVal(FALSE)]. This method is available only if the direction = _[output]_ or _[input/output]_. - SENSOR_SetVal -Sets (to one) the output value. It is equivalent to the [PutVal(TRUE)]. This method is available only if the direction = _[output]_ or _[input/output]_. Module "RTI1" (bean Init_RTI_RS08) - RTI1_Init -This method initializes registers of the RTI module according to this Peripheral Initialization Bean settings. Call this method in the user code to initialize the module. By default, the method is called by PE automatically; see "Call Init method" property of the bean for more details. Module "LEDS" (bean BitIO) - LEDS_GetVal -Returns the input/output value. If the direction is [input] then the input value of the pin is read and returned. If the direction is [output] then the last written value is returned (see <Safe mode> property for limitations). - LEDS_PutVal -The specified output value is set. If the direction is [input], the bean saves the value to a memory or a register and this value will be written to the pin after switching to the output mode (using [SetDir(TRUE)]; see <Safe mode> property for limitations). If the direction is [output], it writes the value to the pin. (Method is available only if the direction = _[output]_ or _[input/output]_). - LEDS_ClrVal -Clears (set to zero) the output value. It is equivalent to the [PutVal(FALSE)]. This method is available only if the direction = _[output]_ or _[input/output]_. - LEDS_SetVal -Sets (to one) the output value. It is equivalent to the [PutVal(TRUE)]. This method is available only if the direction = _[output]_ or _[input/output]_. - LEDS_NegVal -Negates (inverts) the output value. It is equivalent to the [PutVal(!GetVal())]. This method is available only if the direction = _[output]_ or _[input/output]_. Module "Cpu" (bean MC9RS08LE4_28) - Cpu_SetWaitMode -Sets the low power mode - Wait mode. For more information about the wait mode, see the documentation of this CPU. Release from the Wait mode: Reset or interrupt - Cpu_GetLowVoltageFlag -This method returns the flag of the Low Voltage Detect device. The flag is set when the low-voltage error is detected. This method can be enabled only if LVD module is enabled (property <LVD module> is set to 'Enabled' value) and LVD reset is disabled (property <LVD operation> is not set to 'Reset' value). - Cpu_ClearLowVoltageFlag -This method clears the low voltage detect flag. This method can be enabled only if LVD module is enabled (property <LVD module> is set to 'Enabled' value) and LVD reset is disabled (property <LVD operation> is not set to 'Reset' value). - Cpu_Delay100US -This method realizes software delay. The length of delay is at least 100 microsecond multiply input parameter [us100]. As the delay implementation is not based on real clock, the delay time may be increased by interrupt service routines processed during the delay. The method is independent on selected speed mode. ===================================================================================