@Perkins
Technical Data
®
Basic technical data
Number of cylinders . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 3
Cylinder arrangement ... ... ... ... ... ... ... ... ... ... ... ... Vertical in-line
Cycle. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Four stroke
Induction system... ... ... ... ... ... ... ... ... ... ... ... ... ... Turbocharged
Compression ratio. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 17.25 : 1
Bore .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 105 mm (4.13 in)
Stroke .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 127 mm (4.99 in)
Cubic capacity .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 3.3 litres
Direction of rotation... ... ... ... ... ... ... ... .Clockwise view from front
Firing order ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1,2,3
Total weight (engine only)
-dry ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...420 kg
-wet ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...438 kg
Overall dimensions
-height... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 951 mm (37.44 in)
-length... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 1049 mm (41.29 in)
-width (including mounting brackets) ... ... ... ... 634 mm (24.96 in)
Moment of inertia (mk²)
Engine:
- longitudinal. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 kgm²
- horizontal ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 42 kgm²
- axial ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 kgm²
Flywheel (polar) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1.14 kgm²
Centre of gravity (wet)
- forward from rear of block... ... ... ... ... ... ... ... .. 215 mm (8.46 in)
- above centre line of block... ... ... ... ... ... ... ... .. 120 mm (4.72 in)
- offset of RHS of centre line. ... ... ... ... ... ... ... ... 25 mm (0.98 in)
Performance
Steady state speed stability at constant load:
- G2 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ± 0.75%
Note: All data based on operation to ISO 3046/1, BS 5514 and
DIN 6271 standard reference conditions.
Test conditions
Air temperature. . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 °C
Barometric pressure... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 100 kPa
Relative humidity ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 30%
Sound level
Overall sound pressure level (cooling pack and air cleaner fitted):
- at 1500 rev/min ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 89,4 dBA
- at 1800 rev/min ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 92,8 dBA
Sound pressure level from the mean of 4 microphones at the front,
left, right and above the engine. Exhaust was piped away out of the
test cell.
If the engine is to operate in ambient conditions other than those of
the test conditions, suitable adjustments must be made for these
changes. For full details, contact Perkins Technical Service
Department.
1100 Series
1103A-33TG2
Gen Set
59.3 kWm @ 1500 rev/min
67,4 kWm @ 1800 rev/min