datasheet
PRELIMINARY SPECIFICATION
1/3" color CMOS 4 megapixel (2688 x 1520) image sensor
with improved OmniBSI-2™ technology
OV4689
color CMOS 4 megapixel (2688 x 1520) image sensor with OmniBSI-2™ technology
OV4689
00Copyright ©2013 OmniVision Technologies, Inc. All rights reserved.
This document is provided “as is” with no warranties whatsoever, including any warranty of merchantability,
non-infringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification,
or sample.
OmniVision Technologies, Inc. and all its affiliates disclaim all liability, including liability for infringement of any proprietary
rights, relating to the use of information in this document. No license, expressed or implied, by estoppel or otherwise, to
any intellectual property rights is granted herein.
The information contained in this document is considered proprietary to OmniVision Technologies, Inc. and all its
affiliates. This information may be distributed to individuals or organizations authorized by OmniVision Technologies, Inc.
to receive said information. Individuals and/or organizations are not allowed to re-distribute said information.
Trademark Information
OmniVision and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc. OmniBSI-2 and CSP5
are trademarks of OmniVision Technologies, Inc.
All other trademarks used herein are the property of their respective owners.
To learn more about OmniVision Technologies, visit www.ovt.com.
OmniVision Technologies is publicly traded on NASDAQ under the symbol OVTI.
color CMOS 4 megapixel (2688 x 1520) image sensor with OmniBSI-2™ technology
datasheet (CSP5)
PRELIMINARY SPECIFICATION
version 1.3
october 2013
10.23.2013 PRELIMINARY SPECIFICATION proprietary to OmniVision Technologies
i
ordering information
OV04689-H67A (color, lead-free)
67-pin CSP5
00applications
IP cameras
sports cameras
automotive
00features
automatic black level calibration (ABLC)
programmable controls for frame rate, mirror and flip,
cropping, and windowing
static defective pixel canceling
supports output formats: 10-bit RAW RGB (MIPI)
supports horizontal and vertical subsampling
supports images sizes: 4Mpixel, 3Mpixel, EIS1080p,
1080p, EIS720p
fast mode switching
support 2x2 binning, 4x4 binning, re-sampling filter
standard serial SCCB interface
up to 4-lane MIPI serial output interface
embedded 4K bits one-time programmable (OTP)
memory for part identification, etc (see sidebar note)
two on-chip phase lock loops (PLLs)
programmable I/O drive capability
built-in temperature sensor
note
Only1.5K
bits of OTP is available
for customer's use.
00key specifications (typical)
active array size: 2688 x 1520
power supply:
core: 1.1 ~ 1.3V
analog: 2.6 ~ 3.0V
I/O: 1.7 ~ 3.0V
power requirements:
active: 163 mA (261 mW)
standby: 1 mA
XSHUTDOWN: <10 µA
temperature range:
operating: -30°C to +85°C junction temperature
(see table 7-2)
stable image: 0°C to +60°C junction temperature
(see table 7-2)
output formats: 10-bit RAW
lens size: 1/3"
input clock frequency: 6~64 MHz
lens chief ray angle: 0°
max S/N ratio: 38.3 dB
dynamic range: 64.6 dB @ 1x gain
maximum image transfer rate:
2688x1520: 90 fps (see table 2-1)
1280x720: 180 fps (see table 2-1)
1920x1080: 120 fps (see table 2-1)
672x380: 330 fps (see table 2-1)
sensitivity: 1900 mV/Lux-sec
scan mode: progressive
maximum exposure interval: 1548 ×T
ROW
pixel size: 2 µm x 2 µm
dark current: 4mV/sec @ 60°C junction temperature
image area: 5440 µm x 3072 µm
package dimensions: 6630 µm x 5830 µm
note
Higher
junction temperature
degrades image quality
color CMOS 4 megapixel (2688 x 1520) image sensor with OmniBSI-2™ technology
OV4689
proprietary to OmniVision Technologies PRELIMINARY SPECIFICATION version 1.3
10.23.2013 PRELIMINARY SPECIFICATION proprietary to OmniVision Technologies
iii
00table of contents
1 signal descriptions 1-1
2 system level description 2-1
2.1 overview 2-1
2.2 architecture 2-1
2.3 format and frame 2-4
2.4 I/O control 2-5
2.5 MIPI interface 2-5
2.6 power management 2-6
2.6.1 power up sequence 2-6
2.6.2 power down sequence 2-9
2.7 reset 2-13
2.7.1 power ON reset 2-13
2.7.2 software reset 2-13
2.8 hardware and software standby 2-14
2.8.1 hardware standby 2-14
2.8.2 software standby 2-14
2.9 system clock control 2-15
2.9.1 PLL1 2-15
2.9.2 PLL2 2-15
2.10 serial camera control bus (SCCB) interface 2-19
2.10.1 data transfer protocol 2-19
2.10.2 message format 2-19
2.10.3 read / write operation 2-20
2.10.4 SCCB timing 2-23
2.11 group write 2-24
2.12 hold 2-25
2.13 launch 2-25
2.13.1 launch mode 1 - quick manual launch 2-25
2.13.2 launch mode 2 - delay manual launch 2-26
2.13.3 launch mode 3 - quick auto launch 2-26
2.13.4 launch mode 4: delay auto launch 2-26
2.13.5 launch mode 5: repeat launch 2-26
评论0