Library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
entity atel2_bin is
port( txclk: in std_logic; --2400Hz的波特率时钟
reset: in std_logic; --复位信号
din: in std_logic_vector(15 downto 0); --发送的数据
start: in std_logic; --允许传输信号
sout: out std_logic --串行输出端口
);
end atel2_bin;
architecture behav of atel2_bin is
signal thr,len: std_logic_vector(15 downto 0);
signal txcnt_r: std_logic_vector(2 downto 0);
signal sout1: std_logic;
signal cou: integer:=0;
signal oddb:std_logic;
type s is(start1,start2,shift1,shift2,odd1,odd2,stop1,stop2);
signal state:s:=start1;
begin
process(txclk)
begin
if rising_edge(txclk) then
if cou<3 then thr<="0000000001010101"; --发送的文件头
elsif cou=3 then
thr<="0000000000000010"; --发送的文件长度
elsif (cou>3 and state=stop2) then thr<=din;--发送的数据
end if;
end if;
end process;
process(reset,txclk)
variable tsr,tsr1,oddb1,oddb2: std_logic_vector(7 downto 0);
begin
if reset='1' then
txcnt_r<=(others=>'0');
sout1<='1';
state<=start1;
cou<=0;
elsif txclk'event and txclk='1' then
case state is
when start1=>
if start='1' then
if cou=3 then
len<=thr;
end if;
tsr:=thr(7 downto 0);
oddb1:=thr(7 downto 0);
sout1<='0'; --起始位
txcnt_r<=(others=>'0');
state<=shift1;
else
state<=start1;
end if;
when shift1=>
oddb<=oddb1(7) xor oddb1(6) xor oddb1(5) xor oddb1(4) xor oddb1(3) xor oddb1(2) xor oddb1(1) xor oddb1(0);
sout1<=tsr(0); --数据位
tsr(6 downto 0):=tsr(7 downto 1);
tsr(7):='0';
txcnt_r<=txcnt_r+1;
if (txcnt_r=7) then
state<=odd1;cou<=cou+1;
end if;
when odd1=> --奇校验位
if oddb='1' then
sout1<='0';state<=stop1;
else
sout1<='1';state<=stop1;
end if;
when stop1=>
sout1<='1'; --停止位
if cou<4 then
state<=start1;
else
state<=start2;
end if;
when start2=>
tsr1:=thr(15 downto 8);
oddb2:=thr(15 downto 8);
sout1<='0'; --起始位
txcnt_r<=(others=>'0');
state<=shift2;
when shift2=>
oddb<=oddb2(7) xor oddb2(6) xor oddb2(5) xor oddb2(4) xor oddb2(3) xor oddb2(2) xor oddb2(1) xor oddb2(0);
sout1<=tsr1(0); --数据位
tsr1(6 downto 0):=tsr1(7 downto 1);
tsr1(7):='0';
txcnt_r<=txcnt_r+1;
if (txcnt_r=7) then
state<=odd2;
end if;
when odd2=> --奇校验位
if oddb='1' then
sout1<='0';state<=stop2;
else
sout1<='1';state<=stop2;
end if;
when stop2=>
sout1<='1'; --停止位
if len="0000000000000000" then
state<=stop2;
else
state<=start1;
len<=len-1;
end if;
end case;
end if;
end process;
sout<=sout1;
end behav;
评论1