#define KeyPort GPIOA
unsigned char KeyScan(void) //键盘扫描函数,使用行列逐级扫描法
{
unsigned char Val;
//KeyPort=0xf0;//高四位置高,低四位拉低
// KeyPort->BSRR=0x00f0;
//KeyPort->BRR=0x000f;
GPIO_SetBits(KEYPort,KEY44COL);
GPIO_ResetBits(KEYPort,KEY44ROW);
uint16_t Key44_Scan(void)
{
KEY44PORT->ODR &= ~KEY44ROW; //行线全部置0
if(((KEY44PORT->IDR)&KEY44COL)!=KEY44COL)
{ KEY44PORT->ODR |= KEY44ROW;//有按键时,行线全部置高电平,准备扫描
return (uint16_t)1;
}
else
{ KEY44PORT->ODR |= KEY44ROW;
return (uint16_t)0;
}
}
if(KeyPort!=0xf0)//表示有按键按下
{
DelayMs(10); //去抖
if(KeyPort!=0xf0)
{ //表示有按键按下
KeyPort=0xfe; //检测第一行
if(KeyPort!=0xfe)
{
Val=KeyPort&0xf0;
Val+=0x0e;
while(KeyPort!=0xfe);
DelayMs(10); //去抖
while(KeyPort!=0xfe);
return Val;
}
KeyPort=0xfd; //检测第二行
if(KeyPort!=0xfd)
{
Val=KeyPort&0xf0;
Val+=0x0d;
while(KeyPort!=0xfd);
DelayMs(10); //去抖
while(KeyPort!=0xfd);
return Val;
}
KeyPort=0xfb; //检测第三行
if(KeyPort!=0xfb)
{
Val=KeyPort&0xf0;
Val+=0x0b;
while(KeyPort!=0xfb);
DelayMs(10); //去抖
while(KeyPort!=0xfb);
return Val;
}
KeyPort=0xf7; //检测第四行
if(KeyPort!=0xf7)
{
Val=KeyPort&0xf0;
Val+=0x07;
while(KeyPort!=0xf7);
DelayMs(10); //去抖
while(KeyPort!=0xf7);
return Val;
}
}
}
return 0xff;
}
/*------------------------------------------------
按键值处理函数,返回扫键值
------------------------------------------------*/
unsigned char KeyPro(void)
{
switch(KeyScan())
{
case 0x7e:return 0;break;//0 按下相应的键显示相对应的码值
case 0x7d:return 1;break;//1
case 0x7b:return 2;break;//2
case 0x77:return 3;break;//3
case 0xbe:return 4;break;//4
case 0xbd:return 5;break;//5
case 0xbb:return 6;break;//6
case 0xb7:return 7;break;//7
case 0xde:return 8;break;//8
case 0xdd:return 9;break;//9
case 0xdb:return 10;break;//a
case 0xd7:return 11;break;//b
case 0xee:return 12;break;//c
case 0xed:return 13;break;//d
case 0xeb:return 14;break;//e
case 0xe7:return 15;break;//f
default:return 0xff;break;
}
}
评论0