i2c-parport.rar_Over_parport.rar

/* ------------------------------------------------------------------------ * * i2c-parport.c I2C bus over parallel port * * ------------------------------------------------------------------------ * Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org> Based on older i2c-philips-par.c driver Copyright (C) 1995-2000 Simon G. Vogl With some changes from: Frodo Looijaard <frodol@dds.nl> Kyösti Mälkki <kmalkki@cc.hut.fi> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ------------------------------------------------------------------------ */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/parport.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/i2c-smbus.h> #include <linux/slab.h> #include <linux/list.h> #include <linux/mutex.h> #include "i2c-parport.h" /* ----- Device list ------------------------------------------------------ */ struct i2c_par { struct pardevice *pdev; struct i2c_adapter adapter; struct i2c_algo_bit_data algo_data; struct i2c_smbus_alert_setup alert_data; struct i2c_client *ara; struct list_head node; }; static LIST_HEAD(adapter_list); static DEFINE_MUTEX(adapter_list_lock); /* ----- Low-level parallel port access ----------------------------------- */ static void port_write_data(struct parport *p, unsigned char d) { parport_write_data(p, d); } static void port_write_control(struct parport *p, unsigned char d) { parport_write_control(p, d); } static unsigned char port_read_data(struct parport *p) { return parport_read_data(p); } static unsigned char port_read_status(struct parport *p) { return parport_read_status(p); } static unsigned char port_read_control(struct parport *p) { return parport_read_control(p); } static void (* const port_write[])(struct parport *, unsigned char) = { port_write_data, NULL, port_write_control, }; static unsigned char (* const port_read[])(struct parport *) = { port_read_data, port_read_status, port_read_control, }; /* ----- Unified line operation functions --------------------------------- */ static inline void line_set(struct parport *data, int state, const struct lineop *op) { u8 oldval = port_read[op->port](data); /* Touch only the bit(s) needed */ if ((op->inverted && !state) || (!op->inverted && state)) port_write[op->port](data, oldval | op->val); else port_write[op->port](data, oldval & ~op->val); } static inline int line_get(struct parport *data, const struct lineop *op) { u8 oldval = port_read[op->port](data); return ((op->inverted && (oldval & op->val) != op->val) || (!op->inverted && (oldval & op->val) == op->val)); } /* ----- I2C algorithm call-back functions and structures ----------------- */ static void parport_setscl(void *data, int state) { line_set((struct parport *) data, state, &adapter_parm[type].setscl); } static void parport_setsda(void *data, int state) { line_set((struct parport *) data, state, &adapter_parm[type].setsda); } static int parport_getscl(void *data) { return line_get((struct parport *) data, &adapter_parm[type].getscl); } static int parport_getsda(void *data) { return line_get((struct parport *) data, &adapter_parm[type].getsda); } /* Encapsulate the functions above in the correct structure. Note that this is only a template, from which the real structures are copied. The attaching code will set getscl to NULL for adapters that cannot read SCL back, and will also make the data field point to the parallel port structure. */ static const struct i2c_algo_bit_data parport_algo_data = { .setsda = parport_setsda, .setscl = parport_setscl, .getsda = parport_getsda, .getscl = parport_getscl, .udelay = 10, /* ~50 kbps */ .timeout = HZ, }; /* ----- I2c and parallel port call-back functions and structures --------- */ static void i2c_parport_irq(void *data) { struct i2c_par *adapter = data; struct i2c_client *ara = adapter->ara; if (ara) { dev_dbg(&ara->dev, "SMBus alert received\n"); i2c_handle_smbus_alert(ara); } else dev_dbg(&adapter->adapter.dev, "SMBus alert received but no ARA client!\n"); } static void i2c_parport_attach(struct parport *port) { struct i2c_par *adapter; adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); if (adapter == NULL) { printk(KERN_ERR "i2c-parport: Failed to kzalloc\n"); return; } pr_debug("i2c-parport: attaching to %s\n", port->name); parport_disable_irq(port); adapter->pdev = parport_register_device(port, "i2c-parport", NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter); if (!adapter->pdev) { printk(KERN_ERR "i2c-parport: Unable to register with parport\n"); goto err_free; } /* Fill the rest of the structure */ adapter->adapter.owner = THIS_MODULE; adapter->adapter.class = I2C_CLASS_HWMON; strlcpy(adapter->adapter.name, "Parallel port adapter", sizeof(adapter->adapter.name)); adapter->algo_data = parport_algo_data; /* Slow down if we can't sense SCL */ if (!adapter_parm[type].getscl.val) { adapter->algo_data.getscl = NULL; adapter->algo_data.udelay = 50; /* ~10 kbps */ } adapter->algo_data.data = port; adapter->adapter.algo_data = &adapter->algo_data; adapter->adapter.dev.parent = port->physport->dev; if (parport_claim_or_block(adapter->pdev) < 0) { printk(KERN_ERR "i2c-parport: Could not claim parallel port\n"); goto err_unregister; } /* Reset hardware to a sane state (SCL and SDA high) */ parport_setsda(port, 1); parport_setscl(port, 1); /* Other init if needed (power on...) */ if (adapter_parm[type].init.val) { line_set(port, 1, &adapter_parm[type].init); /* Give powered devices some time to settle */ msleep(100); } if (i2c_bit_add_bus(&adapter->adapter) < 0) { printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); goto err_unregister; } /* Setup SMBus alert if supported */ if (adapter_parm[type].smbus_alert) { adapter->alert_data.alert_edge_triggered = 1; adapter->ara = i2c_setup_smbus_alert(&adapter->adapter, &adapter->alert_data); if (adapter->ara) parport_enable_irq(port); else printk(KERN_WARNING "i2c-parport: Failed to register " "ARA client\n"); } /* Add the new adapter to the list */ mutex_lock(&adapter_list_lock); list_add_tail(&adapter->node, &adapter_list); mutex_unlock(&adapter_list_lock); return; err_unregister: parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); err_free: kfree(adapter); } static void i2c_parport_detach(struct parport *port) { struct i2c_par *adapter, *_n; /* Walk the list */ mutex_lock(&adapter_list_lock); list_for_each_entry_safe(adapter, _n, &adapter_list, node) { if (adapter->pdev->port == port) { if (adapter->ara) { parport_disable_irq(port); i2c_unregister_device(adapter->ara); } i2c_del_adapter(&adapter->adapter); /* Un-init if needed (power off...) */ if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); list_del(&adapter->node); kfree(adapter); } } mutex_unlock(&adapter_list_lock); } static struct parport_driver i2c_parport_driver = { .name = "i2c-parport", .attach = i2c_parport_attach, .detach = i2c_parport_de