HSD5.0-7701S读ID-OTP（888888).rar_HSD5.0 7701S_ST7701S读ID_STM32ST7

/** @page FSMC_SRAM FSMC_SRAM @verbatim ******************** (C) COPYRIGHT 2009 STMicroelectronics ******************* * @file FSMC/SRAM/readme.txt * @author MCD Application Team * @version V3.0.0 * @date 04/06/2009 * @brief Description of the FSMC SRAM Example. ****************************************************************************** * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. ****************************************************************************** @endverbatim @par Example Description This example provides a basic example of how to use the FSMC firmware library and an associate driver to perform read/write operations on the IS61WV51216BLL SRAM memory mounted on STM3210E-EVAL board. @par Directory contents - FSMC/SRAM/stm32f10x_conf.h Library Configuration file - FSMC/SRAM/stm32f10x_it.c Interrupt handlers - FSMC/SRAM/stm32f10x_it.h Header for stm32f10x_it.c - FSMC/SRAM/fsmc_sram.c Driver for SRAM memory - FSMC/SRAM/fsmc_sram.h Header for fsmc_sram.c - FSMC/SRAM/main.c Main program @par Hardware and Software environment - This example runs only on STM32F10x High-Density Devices. - This example has been tested with STMicroelectronics STM3210E-EVAL (STM32F10x High-Density) evaluation board and can be easily tailored to any other supported device and development board. @par How to use it ? In order to make the program work, you must do the following: - Create a project and setup all project configuration - Add the required Library files: - stm32f10x_fsmc.c - stm32f10x_gpio.c - stm32f10x_rcc.c - system_stm32f10x.c - Edit stm32f10x.h file to select the device you are working on (#define STM32F10X_HD, in this case). @b Tip: You can tailor the provided project template to run this example, for more details please refer to "stm32f10x_stdperiph_lib_um.chm" user manual; select "Peripheral Examples" then follow the instructions provided in "How to proceed" section. - Link all compiled files and load your image into target memory - Run the example @note - Low-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - Medium-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 32 and 128 Kbytes. - High-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. * <h3><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h3> */