CCNP.642-832.V200(2013.9.5).rar_CCNP.642-832.V200_ccnp_学习

Welcome to Virtual PC Simulator, Ver 0.16a. The VPCS can simulate up to 9 PCs. You can ping/traceroute them, or ping/traceroute the other hosts/routers from the VPCS when you study the Cisco routers in the dynamips. VPCS is not the traditional PC, it is just a program running on the Linux, Windows or OS X(need more testing), and only few network commands can be used in it. But VPCS can give you a big hand when you study the Cisco devices in the Dynamips. VPCS can replace the routers or VMware boxes which are used as PCs in the dynamips network. Now, VPCS can be run in udp or ether mode. In the udp mode, VPCS sends or receives the packets via udp. In the ether mode, via /dev/tap, not support on the Windows. When VPCS started, it listens the ports from 20000 to 20008 and waits the dynamips to connect, and sends the packets to the ports from 30000 to 30008 which should be listened by the dynamips. VPCS will look for the file named 'startup.vpc' in the current directory, and execute the commands in it if you are not set the startup file from the command line. All the commands in the startup file are the internal commands of the VPCS. The line started with '#' or '!' will be discarded. vpcs [options] -u udp mode, default -e tap mode, using /dev/tapx -s port local udp port, default from 20000 -c port remote udp port(dynamips udp ports), default from 30000 -r file run startup file NOTE: To make compatible with the dynamips, VPCS does NOT use the cygwin1.dll released by cygwin.com. These files conflicted. Please keep the latest cygwin1.dll in your system. Website: http://wiki.freecode.com.cn or http://mirnshi.cublog.cn History: 0.16a Support IPv6 0.15a Add configure the host ip using dhcp 0.14g Fix the traceroute loop running bug 0.14f Fix the traceroute TTL bug 0.14e Fix the bug, parse 'echo' and 'traceroute' command line error. 0.14d Fix the bug which reply the arp request with broadcast address as the source MAC address. 0.14c Change the TTL to 64. 0.14b Fix the bug about the I/O queue. 0.14a Add arp function that shows the current arp table, 120 seconds expired. Add echo function that sends upd/tcp packet to the remote hosts. Now, you can test acl in your routers network. 0.13a Add ping localhost Fix a ping bug: get reply from any host ip. 0.12s Fix the tracert argument bug 0.10s Support udp mode 0.02s Fix a string copy bug 0.01s First version