// TI File $Revision: /main/1 $
// Checkin $Date: August 18, 2006 13:46:06 $
//###########################################################################
//
// FILE: DSP2833x_DefaultIsr.c
//
// TITLE: DSP2833x Device Default Interrupt Service Routines.
//
// This file contains shell ISR routines for the 2833x PIE vector table.
// Typically these shell ISR routines can be used to populate the entire PIE
// vector table during device debug. In this manner if an interrupt is taken
// during firmware development, there will always be an ISR to catch it.
//
// As develpment progresses, these ISR rotuines can be eliminated and replaced
// with the user's own ISR routines for each interrupt. Since these shell ISRs
// include infinite loops they will typically not be included as-is in the final
// production firmware.
//
//###########################################################################
// $TI Release: DSP2833x Header Files V1.01 $
// $Release Date: September 26, 2007 $
//###########################################################################
#include "DSP2833x_Device.h" // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h" // DSP2833x Examples Include File
// Connected to INT13 of CPU (use MINT13 mask):
// Note CPU-Timer1 is reserved for TI use, however XINT13
// ISR can be used by the user.
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// Note CPU-Timer2 is reserved for TI use.
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER12_ISR(void) // User Defined trap 12
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// -----------------------------------------------------------
// PIE Group 1 - MUXed into CPU INT1
// -----------------------------------------------------------
// INT1.1
interrupt void SEQ1INT_ISR(void) //SEQ1 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.2
interrupt void SEQ2INT_ISR(void) //SEQ2 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
// INT1.3 - Reserved
// INT1.4
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.5
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.6
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.7
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Insert ISR Code here
// To
lab20-PWM.rar_TMS320F28335 pwm _lab20-PWM
版权申诉
34 浏览量
2022-07-14
23:00:50
上传
评论
收藏 547KB RAR 举报
lab20-PWM.rar （95个子文件） 
lab20-PWM SRC 
DSP2833x_SysCtrl.c 12KB DSP2833x_usDelay.asm 3KB DSP2833x_GlobalVariableDefs.c 11KB DSP2833x_PieCtrl.c 3KB DSP2833x_PieVect.c 7KB Example_EPwmSetup.c 2KB DSP2833x_DefaultIsr.c 30KB DSP2833x_CpuTimers.c 4KB DSP2833x_ADC_cal.asm 1KB DSP2833x_Xintf.c 9KB DSP2833x_EPwm.c 11KB DSP2833x_CodeStartBranch.asm 3KB PWM.c 2KB lab20-PWM.pjt 2KB INCLUDE DSP2833x_SWPrioritizedIsrLevels.h 142KB DSP2833x_Mcbsp.h 31KB DSP2833x_Examples.h 5KB DSP2833x_EPwm.h 16KB DSP2833x_Dma_defines.h 2KB DSP2833x_EPwm_defines.h 4KB DSP2833x_I2c.h 7KB DSP2833x_Spi.h 6KB DSP2833x_XIntrupt.h 2KB DSP2833x_SysCtrl.h 13KB DSP2833x_EQep.h 10KB DSP2833x_GlobalPrototypes.h 8KB DSP2833x_Gpio.h 16KB DSP2833x_ECap.h 6KB DSP2833x_PieVect.h 6KB DSP2833x_Sci.h 8KB DSP2833x_Adc.h 10KB DSP2833x_DMA.h 13KB DSP2833x_CpuTimers.h 6KB DSP2833x_ECan.h 44KB DSP2833x_Project.h 720B IQmathLib.h 123KB SFO_V5.h 3KB SFO.h 2KB DSP2833x_Device.h 7KB DSP2833x_PieCtrl.h 6KB DSP2833x_DevEmu.h 3KB DSP2833x_Xintf.h 4KB DSP2833x_I2c_defines.h 4KB DSP2833x_DefaultIsr.h 6KB .cdtbuild 17KB Debug.lkf 1KB .settings org.eclipse.cdt.managedbuilder.core.prefs 637B .project 589B .cdtproject 553B CMD F28335.cmd 5KB 28335_RAM_lnk.cmd 4KB DSP2833x_Headers_nonBIOS.cmd 8KB .ccsproject 303B PWM.sbl 6KB PWM.paf2 10KB Debug DSP2833x_CpuTimers.obj 123KB sources.mk 2KB DSP2833x_DefaultIsr.obj 165KB DSP2833x_PieVect.obj 129KB DSP2833x_SysCtrl.obj 127KB SRC DSP2833x_EPwm.pp 2KB ccsSrcs.opt 377B subdir.mk 12KB DSP2833x_SysCtrl.pp 2KB DSP2833x_PieVect.pp 2KB Example_EPwmSetup.pp 2KB DSP2833x_Xintf.pp 2KB DSP2833x_DefaultIsr.pp 2KB PWM.pp 2KB DSP2833x_GlobalVariableDefs.pp 2KB DSP2833x_PieCtrl.pp 2KB DSP2833x_CpuTimers.pp 2KB PWM.out 166KB objects.mk 278B DSP2833x_CodeStartBranch.obj 2KB ccsObjs.opt 419B PWM.obj 122KB PWM.map 25KB makefile 4KB Example_EPwmSetup.obj 122KB CMD ccsSrcs.opt 0B subdir.mk 2KB DSP2833x_usDelay.obj 1KB DSP2833x_GlobalVariableDefs.obj 131KB DSP2833x_ADC_cal.obj 1KB DSP2833x_EPwm.obj 125KB DSP2833x_PieCtrl.obj 122KB DSP2833x_Xintf.obj 124KB cc_build_Debug.log 134B PWM.CS_ SYMBOL.DBF 234KB FILE.CDX 3KB FILE.FPT 2KB FILE.DBF 1KB SYMBOL.FPT 402KB SYMBOL.CDX 316KB资源评论
