Fast-Kurtogram.rar_fast kurtogram_峭度谱_快速峭度_快速谱峭度_谱峭度

function c = Fast_Kurtogram(x,nlevel,Fs,opt1,opt2) % Fast_Kurtogram(x,nlevel,Fs) % Computes the fast kurtogram of signal x up to level 'nlevel' % Maximum number of decomposition levels is log2(length(x)), but it is % recommended to stay by a factor 1/8 below this. % Fs = sampling frequency of signal x (default is Fs = 1) % opt1 = 1: the kurtogram is computed via a fast decimated filterbank tree % opt1 = 2: the kurtogram is computed via the short-time Fourier transform % (if there is any difference in the kurtogram between the two measures, this is % due to the presence of impulsive additive noise) % opt2 = 1: classical kurtosis based on 4th order statistics % opt2 = 2: robust kurtosis based on 2nd order statistics of the envelope % (option 1 is faster and has more flexibility than option 2 in the design of the % analysis filter: a short filter in option 1 gives virtually the same results as option 2) % % ------------------- % J. Antoni : 02/2005 % ------------------- N = length(x); N2 = log2(N) - 7;%最大允许分解层 if nlevel > N2%判断输入分解层是否大于最大允许分解层 error('Please enter a smaller number of decomposition levels'); end if nargin < 5%判断输入变量 opt2 = input('Choose the kurtosis measure (classic = 1 ; robust = 2): '); if nargin < 4 opt1 = input('Choose the algorithm (filterbank = 1 ; stft-based = 2): '); if nargin < 3 Fs = 1; end end end % Fast computation of the kurtogram %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% if opt1 == 1 % 1) Filterbank-based kurtogram %%%%%%%%%%%%%%%%%%%%%%%%%%%% % Analytic generating filters N = 16; fc = .4; % a short filter is just good enough! h = fir1(N,fc).*exp(2i*pi*(0:N)*.125);%二分段低通滤波器 n = 2:N+1; g = h(1+mod(1-n,N)).*(-1).^(1-n);%二分段高通滤波器 % N = fix(3/2*N); h1 = fir1(N,2/3*fc).*exp(2i*pi*(0:N)*.25/3);%三分段第一段滤波器 h2 = h1.*exp(2i*pi*(0:N)/6);%三分段第二段滤波器 h3 = h1.*exp(2i*pi*(0:N)/3);%三分段第三段滤波器 % if opt2 == 1 Kwav = K_wpQ(x,h,g,h1,h2,h3,nlevel,'kurt2'); % kurtosis of the complex envelope else Kwav = K_wpQ(x,h,g,h1,h2,h3,nlevel,'kurt1'); % variance of the envelope magnitude end Kwav = Kwav.*(Kwav>0); % keep positive values only! else % 2) STFT-based kurtogram %%%%%%%%%%%%%%%%%%%%%%%%% Nfft = 2.^[3:nlevel+2]; % level 1 of wav_kurt roughly corresponds to a 4-sample hanning window with stft_kurt % or a 8-sample flattop 第一层分8段 temp = [3*Nfft(1)/2 3*Nfft(1:end-2);Nfft(2:end)];%第一行为三分层段数，第二行为二分层段数 Nfft = [Nfft(1) temp(:)'];%用矩阵计算而不是循环赋值的方法，所有分层段数 if opt2 == 1 Kstft = Kf_fft(x,Nfft,1,'kurt2'); % kurtosis of the complex envelope Kx = kurt(x,'kurt2');%未分层前的信号峭度 else Kstft = Kf_fft(x,Nfft,1,'kurt1'); % variance of the envelope magnitude Kx = kurt(x,'kurt1'); end Kstft = [Kx*ones(1,size(Kstft,2));Kstft];%所有峭度汇总 Kstft = Kstft.*(Kstft>0);%只取峭度大于零的部分，峭度小于零的部分视为零 % keep positive values only! end % Graphical results %%%%%%%%%%%%%%%%%%% figure if opt1 == 1%分叉树滤波结果 Level_w = 1:nlevel; Level_w = [Level_w;Level_w+log2(3)-1]; Level_w = Level_w(:); Level_w = [0 Level_w(1:2*nlevel-1)'];%图形纵坐标 freq_w = Fs*((0:3*2^nlevel-1)/(3*2^(nlevel+1)) + 1/(3*2^(2+nlevel)));%图形横坐标Fs/2*((0:3*2^nlevel)+0.5)/(3*2^nlevel) imagesc(freq_w,1:2*nlevel,Kwav),colorbar,[I,J,M] = max_IJ(Kwav);%绘图并求最大值 xlabel('frequency [Hz]'),set(gca,'ytick',1:2*nlevel,'yticklabel',round(Level_w*10)/10),ylabel('level k')%标注坐标 fi = (J-1)/3/2^(nlevel+1); fi = fi + 2^(-2-Level_w(I));%中心频率 if opt2 == 1 title(['fb-kurt.2 - K_{max}=',num2str(round(10*M)/10),' @ level ',num2str(fix(10*Level_w(I))/10),', Bw= ',num2str(Fs*2^-(Level_w(I)+1)),'Hz, f_c=',num2str(Fs*fi),'Hz']) else title(['fb-kurt.1 - K_{max}=',num2str(round(10*M)/10),' @ level ',num2str(fix(10*Level_w(I))/10),', Bw= ',num2str(Fs*2^-(Level_w(I)+1)),'Hz, f_c=',num2str(Fs*fi),'Hz']) end else%短时傅利叶变换结果 LNw_stft = [0 log2(Nfft)];%纵坐标 freq_stft = Fs*((0:Nfft(end)/2-1)/Nfft(end) + 1/Nfft(end)/2);%横坐标 %freq_stft = Fs*(0:Nfft(end)/2-1)/Nfft(end); imagesc(freq_stft,1:2*nlevel,Kstft),colorbar,[I,J,M] = max_IJ(Kstft); fi = (J-1)/Nfft(end); xlabel('frequency [Hz]'),set(gca,'ytick',1:2*nlevel,'yticklabel',round(LNw_stft*10)/10),ylabel('level: log2(Nw)') if opt2 == 1 title(['stft-kurt.2 - K_{max}=',num2str(round(10*M)/10),' @ Nw=2^{',num2str(fix(10*LNw_stft(I))/10),'}, fc=',num2str(Fs*fi),'Hz']) else title(['stft-kurt.1 - K_{max}=',num2str(round(10*M)/10),' @ Nw=2^{',num2str(fix(10*LNw_stft(I))/10),'}, fc=',num2str(Fs*fi),'Hz']) end end % Signal filtering %%%%%%%%%%%%%%%%%% c = []; test = input('Do you want to filter out transient signals from the kurtogram (yes = 1 ; no = 0): '); while test == 1 fi = input([' Enter the optimal carrier frequency (btw 0 and ',num2str(Fs/2),') where to filter the signal: ']); fi = fi/Fs; if opt1 == 1 lev = input([' Enter the optimal level (btw 0 and ',num2str(nlevel),') where to filter the signal: ']); if opt2 == 1 [c,Bw,fc] = Find_wav_kurt(x,h,g,h1,h2,h3,nlevel,lev,fi,'kurt2',Fs); else [c,Bw,fc] = Find_wav_kurt(x,h,g,h1,h2,h3,nlevel,lev,fi,'kurt1',Fs); end else lev = input([' Enter the optimal level (btw 0 and ',num2str(nlevel+2),') where to filter the signal: ']); if opt2 == 1 [c,Nw,fc] = Find_stft_kurt(x,nlevel,lev,fi,'kurt2',Fs); else [c,Nw,fc] = Find_stft_kurt(x,nlevel,lev,fi,'kurt1',Fs); end end test = input('Do you want to keep on filtering out transients (yes = 1 ; no = 0): ');%选择是否退出循环 end %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%