NAND_File.rar_nandflash

The Memory project is a demo program for the MCBSTM32F200 Board using STM32F207IG Microcontroller. Example functionality: - Clock settings: - XTAL = 25 MHz - PLL VCO Clock = 240 MHz - CPU Clock = 120 MHz - USB Clock = 48 MHz It demonstrates an USB Memory based on USB Mass Storage Class. NAND Flash memory on the target is used for the actual Memory. The USB Memory is automatically recognized by the host PC running Windows which will load a generic Mass Storage driver. File manipulation from the target is also available over serial port. When Wakeup button is pressed the USB Memory is unmounted from the PC and can be accessed from the target over serial port. It allows to create, read, copy, delete files and format the card. Pressing Wakeup button again, will re-mount the USB Memory on the PC. Connect a serial cable to RS232 UART1/3/4 port using HyperTerminal at 115200 baud, 8-bits, no parity, 1 stop bit, No Flow Control. The Memory program is a standalone application loaded into on-chip flash and available for one target: STM32F200 Flash: Standalone application for MCBSTM32F200 Board using serial port as communication interface. Jumper settings: J13 and J14 must connect pins 2 and 3 to enable serial output on UART1.