****************************************************************
NOTE: THIS EXAMPLE WILL NOT RE-COMPILE WITHOUT RL-ARM INSTALLED!
****************************************************************
This is an Real-Time Library (RL-ARM) Flash File System file
manipulation example. You can create, read, copy, delete files
from the SD/MMC Flash Memory Card and format the card.
Example functionality:
- Clock Settings:
- XTAL = 12 MHz
- PLL0 = 288 MHz
- CCLK = 72 MHz
- USART1: 115200 baud, 8 data bits, no parity, 1 stop bit
To use this example:
- Connect ULINK2 to the MCB1700 Evaluation Board and power the board.
- Connect MCB1700 Board COM1 port to PC COM port via serial cable.
- start Hyperterminal session and configure serial interface.
- In uVision - load the project file and execute Flash - Download.
- In Hyperterminal window you have now a commandline interface
to create, read, copy, delete files from the SD/MMC
Flash Memory Card and format the card.
The SD_FILE program is a standalone application loaded into
on-chip flash and available for one target:
MCB1700: Standalone application for Keil MCB1700 Board using
COM1 port as a communication interface.
Connect a serial cable to RS232 COM port using
HyperTerminal at 115200 baud, 8-bits, no parity,
1 stop bit, XON/XOFF.
This pre-compiled version is for target "MCB1700" and may be
downloaded using a evalution version of the RealView MDK-ARM package
(available at www.keil.com/demo).