// TI File $Revision: /main/1 $
// Checkin $Date: August 18, 2006 13:46:06 $
//###########################################################################
//
// FILE: DSP2833x_DefaultIsr.c
//
// TITLE: DSP2833x Device Default Interrupt Service Routines.
//
// This file contains shell ISR routines for the 2833x PIE vector table.
// Typically these shell ISR routines can be used to populate the entire PIE
// vector table during device debug. In this manner if an interrupt is taken
// during firmware development, there will always be an ISR to catch it.
//
// As develpment progresses, these ISR rotuines can be eliminated and replaced
// with the user's own ISR routines for each interrupt. Since these shell ISRs
// include infinite loops they will typically not be included as-is in the final
// production firmware.
//
//###########################################################################
// $TI Release: DSP2833x Header Files V1.01 $
// $Release Date: September 26, 2007 $
//###########################################################################
#include "DSP2833x_Device.h" // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h" // DSP2833x Examples Include File
// Connected to INT13 of CPU (use MINT13 mask):
// Note CPU-Timer1 is reserved for TI use, however XINT13
// ISR can be used by the user.
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// Note CPU-Timer2 is reserved for TI use.
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER12_ISR(void) // User Defined trap 12
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// -----------------------------------------------------------
// PIE Group 1 - MUXed into CPU INT1
// -----------------------------------------------------------
// INT1.1
interrupt void SEQ1INT_ISR(void) //SEQ1 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.2
interrupt void SEQ2INT_ISR(void) //SEQ2 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
// INT1.3 - Reserved
// INT1.4
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.5
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.6
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.7
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Insert ISR Code here
// To
没有合适的资源?快使用搜索试试~ 我知道了~
lab8-AD.zip_DSP28335 AD
共69个文件
h:30个
obj:12个
c:9个
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 198 浏览量
2022-09-22
23:16:49
上传
评论
收藏 579KB ZIP 举报
温馨提示
AD采样模块能够在实现控制时提供原始信息,本例程能够实现对AD采样模块的配置与应用
资源推荐
资源详情
资源评论
收起资源包目录
lab8-AD.zip (69个子文件)
lab8-AD
AD.CS_
SYMBOL.DBF 233KB
FILE.CDX 3KB
FILE.FPT 2KB
FILE.DBF 1KB
SYMBOL.FPT 401KB
SYMBOL.CDX 316KB
SRC
DSP2833x_SysCtrl.c 12KB
DSP2833x_usDelay.asm 3KB
AD.c 3KB
DSP2833x_Adc.c 2KB
DSP2833x_GlobalVariableDefs.c 11KB
DSP2833x_PieCtrl.c 3KB
DSP2833x_PieVect.c 7KB
DSP2833x_DefaultIsr.c 30KB
DSP2833x_CpuTimers.c 4KB
DSP2833x_ADC_cal.asm 1KB
DSP2833x_Xintf.c 9KB
DSP2833x_CodeStartBranch.asm 3KB
AD.sbl 6KB
INCLUDE
DSP2833x_SWPrioritizedIsrLevels.h 142KB
DSP2833x_Mcbsp.h 31KB
DSP2833x_Examples.h 5KB
DSP2833x_EPwm.h 16KB
DSP2833x_Dma_defines.h 2KB
DSP2833x_EPwm_defines.h 4KB
DSP2833x_I2c.h 7KB
DSP2833x_Spi.h 6KB
DSP2833x_XIntrupt.h 2KB
DSP2833x_SysCtrl.h 13KB
DSP2833x_EQep.h 10KB
DSP2833x_GlobalPrototypes.h 8KB
DSP2833x_Gpio.h 16KB
DSP2833x_ECap.h 6KB
DSP2833x_PieVect.h 6KB
DSP2833x_Sci.h 8KB
DSP2833x_Adc.h 10KB
DSP2833x_DMA.h 13KB
DSP2833x_CpuTimers.h 6KB
DSP2833x_ECan.h 44KB
DSP2833x_Project.h 720B
IQmathLib.h 123KB
SFO_V5.h 3KB
SFO.h 2KB
DSP2833x_Device.h 6KB
DSP2833x_PieCtrl.h 6KB
DSP2833x_DevEmu.h 3KB
DSP2833x_Xintf.h 4KB
DSP2833x_I2c_defines.h 4KB
DSP2833x_DefaultIsr.h 6KB
AD.paf2 9KB
Debug.lkf 1KB
CMD
28335_RAM_lnk.cmd 4KB
DSP2833x_Headers_nonBIOS.cmd 8KB
Debug
DSP2833x_CpuTimers.obj 111KB
DSP2833x_Adc.obj 110KB
DSP2833x_DefaultIsr.obj 151KB
DSP2833x_PieVect.obj 117KB
DSP2833x_SysCtrl.obj 114KB
DSP2833x_CodeStartBranch.obj 1KB
AD.map 25KB
DSP2833x_usDelay.obj 1KB
DSP2833x_GlobalVariableDefs.obj 119KB
DSP2833x_ADC_cal.obj 1KB
AD.out 150KB
DSP2833x_PieCtrl.obj 110KB
DSP2833x_Xintf.obj 112KB
AD.obj 111KB
AD.pjt 1KB
cc_build_Debug.log 439B
共 69 条
- 1
资源评论
四散
- 粉丝: 52
- 资源: 1万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功