ABOV SEMICONDUCTOR
MC2102
ABOV
SEMICONDUCTOR
10 SEGMENT X 7 GRID LED DRIVER WITH KEYSCAN
Data Sheet (Ver. 1.00)
Version 1.00
Published by
FAE Team
©2008 ABOV Semiconductor Co., Ltd. All right reserved
Additional information of this data sheet may be served by ABOV Semiconductor offices in Korea or Distributors.
ABOV Semiconductor reserves the right to make changes to any information here in at any time without notice
ABOV
Semiconductor
reserves
the
right
to
make
changes
to
any
information
here
in
at
any
time
without
notice
.
The information, diagrams and other data in this manual are correct and reliable, however, ABOV Semiconductor is in no way
responsible for any violations of patents or other rights of the third party generated by the use of this manual.
MC2102
REVISION HISTORY
VERSION 1.00 (2008. 12. 15)
The first Edition
December 15, 2008 Ver 1.00 3/24
MC2102
DESCRIPTION
The MC2102 is specifically designed for LED and LED DISPLAY driver.
The MC2102 has max 13 segment output lines, max 7 grid output lines, one display memory,
control circuit, 4 line serial data interface, and max 10 x 2 matrix key scan .
The more detail spec is listed below as Table 1.1.
Those functions are all incorporated into a single chip to build a highly reliable peripheral device
for a single chip microcomputer.
It is very convenient to control for numeric display.
MC2102’
ii tdlitiiit tiidf PCBLt
MC2102’
s p
i
n ass
i
gnmen
t
s an
d
app
li
ca
ti
on c
i
rcu
it
are op
ti
m
i
ze
d
f
or easy
PCB
L
ayou
t
and cost saving advantages.
FEATURES
• CMOS Technology
• Segment output line selection by command : 10 ~ 13
•
Grid output line selection by command :
4~7
•
Grid
output
line
selection
by
command
:
4~7
• Operation voltage : 2.7V ~ 5.5V
• Low Power Consumption
• 8-Step Dimming control by command
• Serial Interface for Clock, Data Input, Strobe Pins, Data output
• 24-pin SOP Package
APPLICATION
• Segment LED display : VCR, DVD, MWO
Device 명 Segment 수 Grid 수
Key Scanning PKG TYPE
MC2102
10
~
13 Segment
4
~
7Grid
10 X 2 Matrix
24pin SOP
MC2102
10 13
Segment
47
Grid
10
X
2
Matrix
24pin
,
SOP
(Table 1.1)
December 15, 2008 Ver 1.00 4/24
MC2102
PIN DESCRIPTION
PIN NAME I/O DESCRIPTION PIN No.
S i lD t I t/O t tPi
DIO I/O
S
er
i
a
l
D
a
t
a
I
npu
t
/
O
u
t
pu
t
Pi
n
This pin outputs at CLK falling edge.
This pin inputs serial data at the rising edge of CLK signal.
1
CLK I
Serial clock input pin.
Input data is trigger at rising edge.
Output data is trigger at falling edge.
2
STB I
When this pin is HIGH, CLK signal is ignored.
The data input after the STB has fallen is processed 3
as a command.
K1,K2
I
Key scan input pins.
This pins are operated with SEG1/KS1 to SEG10/KS10 pins.
This pins have Pull down resistor internally.
4,5
VDD - Power Supply 6
SEG1/KS1 to
O
Se
g
ment out
p
ut
p
ins.
(
P-channel o
p
en drain
)
7~16
SEG10/KS10
O
gpp(
p)
Also key scan source pins.
7~16
SEG12/GR7 to
SEG14/GR5
O Segment / Grid output pin. 17,18,19
GR4 to GR1 O Grid output pin.
24,23,
21,20
GND - Ground pin. 22
December 15, 2008 Ver 1.00 5/24