visible_light.rar_prxlos_purplefg1_可见光 通信_可见光代码_可见光通信matlab仿真

% Please refer to the paper "Improvement of data rate by using equalization % in an indoor visible light communication system (2008)" by Lubin Zeng, Dominic % O'Brien, Hoa Le-Minh, Kyungwoo Lee, Daekwang Jung, and Yunje Oh. clear all; clc; [length,width] = meshgrid(0.5:0.05:5); height = 3; q=1.602176487E-19; Aroom = length.*width; ARX = 50; d = 3; psi = 30; psic = 70; no_of_LEDs = 4; phi_half = pi/3; pLED = 0.02; %（单LED功率？） Ro = real(RO(phi_half)); %Ro:发光功率 ptx = pLED*Ro; %(发射功率？） reflectivity_of_floor = 0.15; %地面反射 reflectivity_of_ceiling = 0.8; %天花板反射 reflectivity_of_wall = 0.9; %墙面反射 floor_area = Aroom; ceiling_area = Aroom; wall_area = length*d; pTotalLEDs = no_of_LEDs*pLED; g = 6; TF = 1; noisebandwidth_factor = 0.562; dataRate = 512000; R=0.55; hlos = HLOS(ARX,d,psi,psic,Ro); pn = 3.3*5.84E-3; prxlos = PRXLOS(no_of_LEDs,ptx,hlos); amplifier_current = 0.01; Ba = 4.5E6; rhoF = floor_area .* reflectivity_of_floor; rhoC = ceiling_area .* reflectivity_of_ceiling; rhoW = wall_area .* reflectivity_of_wall; rho = (1./Aroom) .* (rhoF + rhoC + rhoW); Ii = rho .* (pTotalLEDs./Aroom); intensity = Ii./(1-rho); received_diffused_power = ARX*intensity; diffused_channel_loss = received_diffused_power/pTotalLEDs; prx = (prxlos+received_diffused_power)*TF*g; PDoutput_current = prx*R;%PD输出电流 Bn = noisebandwidth_factor*dataRate; omegashot = 2*q*R*(prx+pn)*Bn; omegaamp = amplifier_current^2*Ba; omegatotal = omegashot + omegaamp; %Signal-to-Noise Ratio SNR = (R*prx)^2./omegatotal; SNRdb = 10*log10(SNR); % Error Function Q = (1/2)*erfc((omegatotal./(R*prx.^2)./sqrt(2))); % Bit Error Rate BER = Q*sqrt(SNR); % Plot 3D mesh(length,width,SNRdb) figure(2) mesh(length,width,BER)