# README.TXT
This project is a generic base for a HC12 ANSI-C project debugged with a P&E Cable12 .
Project layout:
===============
Folders used:
- Sources: Will contain your sources. For the moment, it contains an empty 'main.c' as a base.
-------
- Debugger Cmd Files: Here you can place your own specific debugger command files.
------------------
- Startup Code: Contains the startup code of the application. You may adapt it
------------ to your own needs, but in such a case make sure that you create a local copy.
- Prm: Contains the linker parameter file used for linking (.prm)
--- and a Batch Burner command file (usual extension is .bbl, see \docu\common\manual\Manual Burner.pdf )
Note that the file used for the linker
is specified in the Linker Preference Panel itself (<ALT-F7>
- Libs: Contains the ANSI library to be linked with.
----
- Debugger Project File: This .ini file is passed to the debugger/simulator
--------------------- as configuration file. It contains various target interface settings, and path
information as well. This file can also be edited from the simulator/debugger e.g. using
File->Configuration in the simulator/debugger.
- Debugger Cmd Files: these files contain commands to be played at specific stages of the process.
------------------
-startup.cmd: This command file is executed to set up the target system just
after the connection has been established.
-reset.cmd: This command file is executed after a user enforce reset has been
performed (the Reset button, menu entry or command line command has been used).
-preload.cmd: This command file is executed before an application (code or symbols)
is loaded in the debugger.
-postload.cmd: This command file is executed after an application (code or symbols)
has been loaded in the debugger.
-vppon.cmd: This command file is executed before Non Volatile Memory is erased
or programmed using the NVMC dialog or the corresponding debugger command.
-vppoff.cmd: The Vppoff command file is executed after Non Volatile Memory has
been erased or programmed using the NVMC dialog or the corresponding debugger command.
Build Targets:
==============
This project contains following build targets :
- Ram Application : Build settings are suitable for an application located in Ram.
- Flash Application : For code located in Flash.
- Banked Flash : For code located in banked Flash.
Compiler options:
=================
The Compiler option -ol0 has been set up to disable some compiler optimizations
in order to be able to see all the local variables in the debugger Data component.
Hardware Notes:
===============
WARNING: The onchip flash memory will be erased and written each time you
perform a load. Please check "preload.cmd" and "postload.cmd" command files
execution to enable/disable this process. The execution of these command files
is monitored with the ICD12 | Command Files dialog.
WARNING: In order to Flash, please make sure the correct programming voltage is
supplied to the microcontroller and the correct MCUID has been used.
没有合适的资源?快使用搜索试试~ 我知道了~
Serial_Communications_Interface_(SCI).zip_freescale s12_s12 SCI
共35个文件
cmd:7个
o:4个
tdt:3个
1.该资源内容由用户上传,如若侵权请联系客服进行举报
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
2.虚拟产品一经售出概不退款(资源遇到问题,请及时私信上传者)
版权申诉
0 下载量 65 浏览量
2022-09-23
23:48:52
上传
评论
收藏 266KB ZIP 举报
温馨提示
飞思卡尔S12系列Serial_Communications_Interface_(SCI)应用范例
资源推荐
资源详情
资源评论
收起资源包目录
Serial_Communications_Interface_(SCI).zip (35个子文件)
www.pudn.com.txt 218B
Serial Communications Interface (SCI)
SCI_Example
bin
Flash_Application.map 108KB
Flash_Application.abs.s19 2KB
Ram_Application.map 107KB
Flash_Application.bpt 12B
Ram_Application.bpt 12B
Ram_Application.abs 92KB
Ram_Application.abs.s19 784B
Flash_Application.abs 93KB
cmd
Preload.cmd 363B
Startup.cmd 59B
Vppon.cmd 75B
Postload.cmd 304B
Reset.cmd 63B
erase_unsecure_dp256.cmd 2KB
Vppoff.cmd 70B
prm
flash.prm 517B
ram.prm 373B
burner.bbl 138B
banked_flash.prm 2KB
ram.ini 1KB
SCI_Example.mcp 188KB
flash.ini 2KB
banked_flash.ini 878B
sources
main.c 6KB
START12.C 15KB
readme.txt 3KB
SCI_Example_Data
Banked_Flash
TargetDataWindows.tdt 44KB
Flash_Application
ObjectCode
main.c.o 110KB
START12.C.o 6KB
TargetDataWindows.tdt 113KB
CWSettingsWindows.stg 4KB
Ram_Application
ObjectCode
main.c.o 108KB
START12.C.o 6KB
TargetDataWindows.tdt 109KB
共 35 条
- 1
资源评论
weixin_42653672
- 粉丝: 93
- 资源: 1万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功