// TI File $Revision: /main/2 $
// Checkin $Date: January 14, 2008 11:17:46 $
//###########################################################################
//
// FILE: DSP2833x_DefaultIsr.c
//
// TITLE: DSP2833x Device Default Interrupt Service Routines.
//
// This file contains shell ISR routines for the 2833x PIE vector table.
// Typically these shell ISR routines can be used to populate the entire PIE
// vector table during device debug. In this manner if an interrupt is taken
// during firmware development, there will always be an ISR to catch it.
//
// As develpment progresses, these ISR rotuines can be eliminated and replaced
// with the user's own ISR routines for each interrupt. Since these shell ISRs
// include infinite loops they will typically not be included as-is in the final
// production firmware.
//
//###########################################################################
// $TI Release: DSP2833x/DSP2823x C/C++ Header Files V1.31 $
// $Release Date: August 4, 2009 $
//###########################################################################
#include "DSP2833x_Device.h" // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h" // DSP2833x Examples Include File
// Connected to INT13 of CPU (use MINT13 mask):
// Note CPU-Timer1 is reserved for TI use, however XINT13
// ISR can be used by the user.
interrupt void INT13_ISR(void) // INT13 or CPU-Timer1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// Note CPU-Timer2 is reserved for TI use.
interrupt void INT14_ISR(void) // CPU-Timer2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void DATALOG_ISR(void) // Datalogging interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void RTOSINT_ISR(void) // RTOS interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void EMUINT_ISR(void) // Emulation interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void NMI_ISR(void) // Non-maskable interrupt
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void ILLEGAL_ISR(void) // Illegal operation TRAP
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
interrupt void USER1_ISR(void) // User Defined trap 1
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER2_ISR(void) // User Defined trap 2
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER3_ISR(void) // User Defined trap 3
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER4_ISR(void) // User Defined trap 4
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER5_ISR(void) // User Defined trap 5
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER6_ISR(void) // User Defined trap 6
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER7_ISR(void) // User Defined trap 7
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER8_ISR(void) // User Defined trap 8
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER9_ISR(void) // User Defined trap 9
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER10_ISR(void) // User Defined trap 10
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER11_ISR(void) // User Defined trap 11
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
interrupt void USER12_ISR(void) // User Defined trap 12
{
// Insert ISR Code here
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// -----------------------------------------------------------
// PIE Group 1 - MUXed into CPU INT1
// -----------------------------------------------------------
// INT1.1
interrupt void SEQ1INT_ISR(void) //SEQ1 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.2
interrupt void SEQ2INT_ISR(void) //SEQ2 ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm(" ESTOP0");
for(;;);
}
// INT1.3 - Reserved
// INT1.4
interrupt void XINT1_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.5
interrupt void XINT2_ISR(void)
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.6
interrupt void ADCINT_ISR(void) // ADC
{
// Insert ISR Code here
// To receive more interrupts from this PIE group, acknowledge this interrupt
// PieCtrlRegs.PIEACK.all = PIEACK_GROUP1;
// Next two lines for debug only to halt the processor here
// Remove after inserting ISR Code
asm (" ESTOP0");
for(;;);
}
// INT1.7
interrupt void TINT0_ISR(void) // CPU-Timer 0
{
// Insert ISR Code here
// To receive more interrup
没有合适的资源?快使用搜索试试~ 我知道了~
资源详情
资源评论
资源推荐
收起资源包目录
SPWM.rar_50HZ INVERTER_dsp_spwm_spwm inverter_全桥逆变 (132个子文件)
DSP2833x_CodeStartBranch.asm 3KB
DSP2833x_usDelay.asm 3KB
DSP2833x_ADC_cal.asm 1KB
DSP2833x_DefaultIsr.c 30KB
DSP2833x_DMA.c 21KB
DSP2833x_ECan.c 16KB
DSP2833x_Mcbsp.c 14KB
SPWM.c 14KB
SPWM.c 14KB
DSP2833x_SysCtrl.c 12KB
DSP2833x_GlobalVariableDefs.c 11KB
DSP2833x_EPwm.c 11KB
DSP2833x_Xintf.c 9KB
DSP2833x_ECap.c 8KB
DSP2833x_PieVect.c 7KB
DSP2833x_Sci.c 6KB
DSP2833x_EQep.c 6KB
DSP2833x_Spi.c 4KB
DSP2833x_CpuTimers.c 4KB
DSP2833x_Adc.c 3KB
DSP2833x_Gpio.c 3KB
DSP2833x_I2C.c 3KB
DSP2833x_PieCtrl.c 3KB
DSP2833x_MemCopy.c 1KB
.ccsproject 382B
.cdtbuild 11KB
.cdtbuild_initial 11KB
.cdtproject 677B
F28335.cmd 9KB
DSP2833x_Headers_BIOS.cmd 8KB
DSP2833x_Headers_nonBIOS.cmd 8KB
28335_RAM_lnk.cmd 7KB
.cproject 19KB
DSP2833x_ECan.h 44KB
SIN1500.h 35KB
DSP2833x_Mcbsp.h 31KB
Variable.h 20KB
DSP2833x_EPwm.h 16KB
DSP2833x_Gpio.h 15KB
DSP2833x_DMA.h 14KB
DSP2833x_SysCtrl.h 13KB
DSP2833x_Adc.h 10KB
DSP2833x_EQep.h 10KB
fdacoef32.h 9KB
DSP2833x_GlobalPrototypes.h 8KB
DSP2833x_Sci.h 8KB
DSP2833x_I2c.h 7KB
DSP2833x_PieVect.h 6KB
DSP2833x_DefaultIsr.h 6KB
DSP2833x_Spi.h 6KB
DSP2833x_ECap.h 6KB
DSP2833x_Device.h 6KB
DSP2833x_PieCtrl.h 6KB
DSP2833x_CpuTimers.h 6KB
DSP2833x_Examples.h 5KB
DSP2833x_I2c_defines.h 4KB
DSP2833x_EPwm_defines.h 4KB
DSP2833x_Xintf.h 4KB
DSP2833x_DevEmu.h 3KB
DSP2833x_XIntrupt.h 2KB
DSP2833x_Dma_defines.h 2KB
DSP28x_Project.h 790B
SPWM.launch 4KB
makefile 5KB
SPWM.map 47KB
subdir.mk 17KB
subdir_rules.mk 12KB
subdir_vars.mk 4KB
sources.mk 2KB
subdir.mk 1KB
subdir.mk 944B
subdir_rules.mk 836B
subdir_vars.mk 592B
subdir_vars.mk 366B
subdir_rules.mk 289B
objects.mk 250B
DSP2833x_GlobalVariableDefs.obj 119KB
SPWM.obj 60KB
DSP2833x_ECan.obj 40KB
DSP2833x_Mcbsp.obj 36KB
DSP2833x_DMA.obj 34KB
DSP2833x_DefaultIsr.obj 28KB
DSP2833x_PieVect.obj 17KB
DSP2833x_SysCtrl.obj 16KB
DSP2833x_Xintf.obj 16KB
DSP2833x_EPwm.obj 15KB
DSP2833x_ECap.obj 14KB
DSP2833x_Sci.obj 13KB
DSP2833x_EQep.obj 13KB
DSP2833x_Spi.obj 12KB
DSP2833x_Adc.obj 12KB
DSP2833x_I2C.obj 11KB
DSP2833x_Gpio.obj 11KB
DSP2833x_CpuTimers.obj 6KB
DSP2833x_PieCtrl.obj 6KB
DSP2833x_MemCopy.obj 3KB
DSP2833x_CodeStartBranch.obj 2KB
DSP2833x_usDelay.obj 1KB
DSP2833x_ADC_cal.obj 1KB
ccsLinker.opt 1014B
共 132 条
- 1
- 2
weixin_42653672
- 粉丝: 93
- 资源: 1万+
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- 技术面试最后反问面试官的话 校招面试非技术问题有哪些 非技术问题如何回答.png
- NB-IOT-BC26全网通模块Altium+ CADENCE +PADS三种格式(原理图SCH+PCB封装库)文件.zip
- 基于微信小程序开发的校园失物招领系统源码毕业设计(优质项目源码).zip
- 词向量是一种将自然语言中的单词转换为数值向量的技术,它能够捕捉词义和上下文信息
- nmap与masscan的简单使用
- MyBatis动态SQL.pdf
- 基于stm32单片机protues仿真的温湿度控制系统设计(仿真图、源代码)
- 词向量:自然语言处理的基石
- mybatis动态sql
- 40G微信小程序开发教程(工具插件+视频教程)
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0