sd_card.rar_ TI_Cortex-M3_Cortex_Cortex M3 FAT16_cortex m3 FAT_s

SD card using FAT file system This example application demonstrates reading a file system from an SD card. It makes use of FatFs, a FAT file system driver. It provides a simple command console via a serial port for issuing commands to view and navigate the file system on the SD card. The first UART, which is connected to the FTDI virtual serial port on the evaluation board, is configured for 115,200 bits per second, and 8-N-1 mode. When the program is started a message will be printed to the terminal. Type ``help'' for command help. For additional details about FatFs, see the following site: http://elm-chan.org/fsw/ff/00index_e.html ------------------------------------------------------------------------------- Copyright (c) 2008-2009 Luminary Micro, Inc. All rights reserved. Software License Agreement Luminary Micro, Inc. (LMI) is supplying this software for use solely and exclusively on LMI's microcontroller products. The software is owned by LMI and/or its suppliers, and is protected under applicable copyright laws. All rights are reserved. You may not combine this software with "viral" open-source software in order to form a larger program. Any use in violation of the foregoing restrictions may subject the user to criminal sanctions under applicable laws, as well as to civil liability for the breach of the terms and conditions of this license. THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. This is part of revision 4781 of the EK-LM3S3748 Firmware Package.