The 'Blinky' project is a simple demo program for
TI 'TM4C1294NCPDT' microcontroller using TI 'EK-TM4C1294XL' Evaluation Board.
Compliant to Cortex Microcontroller Software Interface Standard (CMSIS v2.0).
Example functionality:
- Clock Settings:
- XTAL = 25.00 MHz
- SYS = PIOSC = 16.00 MHz
- 4 LEDs blink with a fixed speed, determined by SysTick Timer
working in interrupt mode
- if any Button (USR_SW1, USR_SW2) is pressed all LEDs are lit.
- "Hello World" is output onto serial port UART0
UART0 settings: 115200 baud, 8 data bits, no parity, 1 stop bit
The Blinky program is available in different targets:
TM4C129 RAM: configured for on-chip RAM
(used for debugging)
TM4C129 Flash: configured for on-chip Flash
(used for production or target debugging)
评论0