rt73-cvs-daily.tar.gz_rt73_rt73-cvs-dai_rt73-cvs-daily

iwpriv ================= This is detailed explanation of each parameters for iwpriv. Before reading this document, make sure you already read README. ------------------------------------------------------------------------------------------------------- USAGE_1: iwpriv wlan0 set [parameters]=[val] NOTE: Execute one iwpriv/set command simultaneously. DESCRIPTION [parameters] [val] /{range} ----------------- ------------------------------------------------- CountryRegion {0~7} ::Set country region 0: 1 ~ 11 ch 1: 1 ~ 13 ch 2: 10, 11 ch 3: 10 ~ 13 ch 4: 14 ch 5: 1 ~ 14 ch 6: 3 ~ 9 ch 7: 5 ~ 13 ch CountryRegionABand {0~10} ::Set country region for A band 0: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 ch 1: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch 2: 36, 40, 44, 48, 52, 56, 60, 64 ch 3: 52, 56, 60, 64, 149, 153, 157, 161 ch 4: 149, 153, 157, 161, 165 ch 5: 149, 153, 157, 161 ch 6: 36, 40, 44, 48 ch 7: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 ch 8: 52, 56, 60, 64 ch 9: 34, 38, 42, 46 ch 10: 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 ch SSID {0~z, 1~32 ascii characters} ::Set AP SSID WirelessMode {0~4} ::Set Wireless Mode 0:11b/g mixed, 1:11B only, 2:11A only 3:11a/b/g mixed, 4:11G only TxRate {0~12} ::Set TxRate of Infrastructure mode 0:Auto, 1:1Mbps, 2:2Mbps, 3:5.5Mbps, 4:11Mbps, 5:6Mbps, 6:9Mbps, 7:12Mbps, 8:18Mbps, 9:24Mbps, 10:36Mbps, 11:48Mbps, 12:54Mbps Channel depends on CountryRegion or CountryRegionABand ::Set Channel BGProtection {0~2} ::Set 11B/11G Protection 0:Auto, 1:Always on, 2:Always off TxPreamble {0~2} ::Set TxPreamble 0:Preamble Long, 1:Preamble Short, 2:Auto RTSThreshold {1~2347} ::Set RTS Threshold FragThreshold {256~2346} ::Set Fragment Threshold TxBurst {0,1} ::Set TxBurst Enable or Disable 0:Disable, 1:Enable NetworkType {Infra,Adhoc} ::Set Network type AdhocOfdm {0~3} ::Set Adhoc Wireless Mode 0: WIFI mode(11b rates only), 1: b/g mixed, 2: 11g only, 3: 11a only AuthMode {OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE} ::Set Authentication Mode EncrypType {NONE,WEP,TKIP,AES} ::Set Encryption Type DefaultKeyID {1~4} ::Set Default Key ID Key1 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key1 String Key2 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key2 String Key3 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key3 String Key4 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key4 String WPAPSK {8~63 ascii or 64 hex characters} ::WPA Pre-Shared Key PSMode {CAM, MAX_PSP, FAST_PSP} ::Set Power Saving Mode IEEE80211H {0,1} ::Set IEEE80211H Enable or Disable 0: Disable 1: Enable spectrum management (This field can be enable only in A band) ------------------------------------------------------------------------------------------------------- USAGE_2: iwpriv wlan0 [parameters] [val] DESCRIPTION [parameters] [val] range explaination ----------------- ----------------------- ------------------------------------------ auth {1~5} 1:OPEN Authentication Mode 2:SHARED 3:WPAPSK 4:WPA2PSK 5:WPANONE enc {1~4} 1:NONE Encryption Type 2:WEP 3:TKIP 4:AES wpapsk {8~64 chars} WPAPSK/WPA2PSK Password psm {0~2} 0:constantly awake mode (CAM) Power Saving Mode 1:MAX_PSP 2:FAST_PSP ------------------------------------------------------------------------------------------------------- Examples ================= ------------------------------------------------------------------------------------------------------- a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption) 1. iwpriv wlan0 set NetworkType=Infra 2. iwpriv wlan0 set AuthMode=OPEN 3. iwpriv wlan0 set EncrypType=NONE 4. iwpriv wlan0 set SSID="AP's SSID" b> Config STA to link with AP and OPEN/WEP(Authentication/Encryption). Default Key ID = 3 1. iwconfig wlan0 key [3] 2. iwconfig wlan0 key s:abcde 3. iwconfig wlan0 essid "AP's SSID" c> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption). 1. iwpriv wlan0 set NetworkType=Infra 2. iwpriv wlan0 set AuthMode=SHARED 3. iwpriv wlan0 set EncrypType=WEP 4. iwpriv wlan0 set Key1="AP's wep key" 5. iwpriv wlan0 set DefaultKeyID=1 6. iwpriv wlan0 set SSID="AP's SSID" d> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption) 1. iwpriv wlan0 set NetworkType=Infra 2. iwpriv wlan0 set AuthMode=WPAPSK 3. iwpriv wlan0 set EncrypType=TKIP 4. iwpriv wlan0 set SSID="AP's SSID" 5. iwpriv wlan0 set WPAPSK="12345678" 6. iwpriv wlan0 set SSID="AP's SSID" p.s Step 4 is part of generating wpapsk password and is necessary. e> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption) 1. iwconfig wlan0 mode managed 2. iwpriv wlan0 auth 3 3. iwpriv wlan0 enc 4 4. iwconfig wlan0 essid "AP's SSID" 5. iwpriv wlan0 wpapsk 12345678 6. iwconfig wlan0 essid "AP's SSID" f> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption) 1. iwpriv wlan0 set NetworkType=Infra 2. iwpriv wlan0 set AuthMode=WPA2PSK 3. iwpriv wlan0 set EncrypType=TKIP 4. iwpriv wlan0 set SSID="AP's SSID" 5. iwpriv wlan0 set WPAPSK="12345678" 6. iwpriv wlan0 set SSID="AP's SSID" g> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption) 1. iwpriv wlan0 set NetworkType=Adhoc 2. iwpriv wlan0 set AuthMode=OPEN 3. iwpriv wlan0 set EncrypType=NONE 4. iwpriv wlan0 set SSID="Adhoc's SSID" h> Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption) 1. iwpriv wlan0 set NetworkType=Adhoc 2. iwpriv wlan0 set AuthMode=WPANONE 3. iwpriv wlan0 set EncrypType=TKIP 4. iwpriv wlan0 set SSID="AP's SSID" 5. iwpriv wlan0 set WPAPSK=12345678 6. iwpriv wlan0 set SSID="AP's SSID" i> Get site survey iwpriv wlan0 get_site_survey j> Get Statistics iwpriv wlan0 stat ; read statistic counter iwpriv wlan0 set ResetCounter=0 ; reset statistic counter k> Link with any AP without security ; set ANY SSID (ssidL