Uart.rar_lpc2148 serial

Project Start: 6/6/05 Project LPC2148_Simple_UART Intent: This application is intended to show how to set up the UART to transmit charac- ters by a simple polling routine. Specifications: 1. Send a character out of serial port UART0 every 50 milliseconds 2. 50msec time interval set by software timer 3. Timer0 generates master interrupt at 100Hz by compare to match register 0 Author: Mark Moran Last Date Modified: 9 Jun 05 Status: Works According to specification Copyright: IAR Systems Software Inc. 2005 Disclaimer: This code is furnished "as is" to illustrate how to use the IAR Embedded Workbench integrated development environment to create and debugcode for NXP LPC2xxx ARM7 microcontrollers. Code in this example may be used freely for any purpose. Every effort has been made to ensure compliance with above specification. Anyone using this code for any purpose whatsoever agrees to accept all pursuant risks in use and hold IAR harmless for any and all damages. In other words, if this code smokes your board, it is not our fault.