This example project uses CMSIS and demonstrates
the use of Systick in interrupt driven mode
LandTiger GPIO Example
/*********************** Design by PowerAVR *********************/
Design: www.PowerMCU.com
www.PowerAVR.com
Board: LandTiger Evaluation Board
Device: LPC1768
/*********************** Design by PowerAVR *********************/
Example functionality:
- Clock Settings:
- XTAL = 12.00 MHz
- SYSCLK = 100.00 MHz
-- CMSIS ---------------------------------------------
SystemInit called from startup_LPC17xx.s
SystemCoreClock is 100000000Hz
SysTick runs in interrupt mode
JP8 jumper
Open: LED disabled
Short: LED active (default)
/****************************************************************/
路虎开发板 GPIO实验
这个例程是将路虎开发板上的八个LED轮流点亮100毫秒,
采用SYStick 定时器中断方式做延时 系统时钟设置在100MHZ
使用时,短路JP8跳线使能LED。