The 'Blinky' project is a simple program for the ST 'STM32F103ZE'
microcontroller using Keil 'MCBSTM32E' Evaluation Board, compliant
to Cortex Microcontroller Software Interface Standard (CMSIS v2.0).
Example functionality:
- Clock Settings:
- XTAL = 8.00 MHz
- SYSCLK = 72.00 MHz
- HCLK = SYSCLK = 72.00 MHz
The simple RTX Kernel based example simulates the step-motor
driver. Four LEDs are blinking simulating the activation of
the four output driver stages:
- phase A
- phase B
- phase C
- phase D
This example simulates Half step driver mode and
CW rotation direction.
The BLINKY example program is available for several targets:
STM32F103 Flash: runs from Internal Flash located on chip
(used for production or target debugging)
STM32F103 RAM: runs from Internal RAM located on chip
(may be used for target debugging)