没有合适的资源?快使用搜索试试~ 我知道了~
125 μm fiber based all-optical ultrasound probes for pulse-echo ...
0 下载量 135 浏览量
2021-02-22
05:08:00
上传
评论
收藏 419KB PDF 举报
温馨提示
All-optical ultrasound probes that contain a photoacoustically-based ultrasound generator paired with a photonic acoustic sensor provide a promising imaging modality for diagnostic and MRI-compatible applications. Here, we demonstrate the fabrication of a fiber-based all-optical ultrasound probe and its applications in pulse-echo ultrasound imaging. The ultrasound generator is fabricated on a 125 μm multimode optical fiber by forming a light-absorbing multiwalled carbon nanotube (MWCNT)-polydime
资源推荐
资源详情
资源评论
125 μm fiber based all-optical ultrasound probes
for pulse-echo imaging
Yinlong Zhang (张银龙), Yizhi Liang (梁贻智)*, Long Jin (金 龙),
and Baiou Guan (关柏鸥)
Guangdong Provincial Key Laboratory of Optical Fiber Sensing and Communications, Institute of Phot onics
Technology, Jinan University, Guangzhou 510632, China
*Corresponding author: liangyizhi88528@gmail.com
Received January 21, 2019; accepted April 18, 2019; posted online July 4, 2019
All-optical ultrasound probes that contain a photoacoustically-based ultrasound generator paired with a
photonic acoustic sensor provide a promising imaging modality for diagnostic and MRI-compatible applications.
Here, we demonstrate the fabrication of a fiber-based all-optical ultrasound probe and its applications in pulse-
echo ultrasound imaging. The ultrasound generator is fabricated on a 125 μm multimode optical fiber by forming
a light-absorbing multiwalled carbon nanotube (MWCNT)-polydimethylsiloxane (PDMS) composite coating on
its distal end. A peak-to-peak acoustic pressure of 0.95 MPa was achieved with laser irradiation at 2.46 μJby
chemically functionalizing the fiber surface to enable a strong adsorption. Ultrasound reception was performed
by a fiber-laser ultrasound sensor that translates ultrasound pressure into differential lasing-frequency changes.
By linearly scanning the probe, ex vivo two- and three-dimensional imaging of a segment of swine
trachea was demonstrated by detecting the echo ultrasound signals and reconstructing the acoustic scatterers.
The probe presents axial and lateral resolutions at 150 and 62 μm, respectively. The small-sized, side-looking
all-fiber ultrasound probe presents a promising approach for assembling an interventional endoscopy.
OCIS codes: 060.2370, 110.5125, 110.7170.
doi: 10.3788/COL201917.070604.
Pulse-echo ultrasound imaging has been widely used
in biomedical applications, particularly for clinical
diagnostics
[1,2]
. In current imaging instrumentation, an
ultrasound transducer array generates ultrasonic pulses
and subsequently detects pulse-echo signals that contain
information on the elastic contrasts of the samples and
their positions. However, the detection bandwidths and
vision angles of the piezoelectric transducers are somewhat
limited (typically 1 to 5 MHz in bandwidth and 40° in vi-
sion angle). As a result, the spatial resolution is rather lim-
ited and vertical structures can be hardly visible.
Recently, the development of all-optical ultrasound devi-
ces has attracted increasing interest. Optical ultrasound
generators based on the photoacoustic effect can provide
comparable or even higher ultrasound pressure and much
wider bandwidths that are required to achieve a high
sensitivity and spatial resolution in pulse-echo imaging.
Light-absorbing materials and membranes are formed
on a transparent substrate, where the absorption of pulsed
or amplitude-modulated light results in localized heating
and its translation into ultrasonic waves
[3,4]
. A number of
absorbers including carbon-based nanofibers, nanotubes,
and graphene oxide have been employed, and covered with
highly thermally expandable polymers for efficient trans-
lation of heat into sound waves
[5–7]
. One distinct advantage
of optical ultrasound excitation is that the acoustic source
geometry can be flexibly controlled. For example, geomet-
ric focusing with a high numerical aperture can be easily
achieved by constructing a concave absorbing surface
[8,9]
.
Mechanically scanning the pulse laser beam over the
individual cores of a fiber bundle or over a geometrically
extended absorption membrane can synthesize a desired
source array
[10,11]
. On the other hand, optical ultrasound
detection has been demonstrated based on free-space
optical interferometry or acoustically induced deflection/
polarization variation of the light beam
[12–15]
. Mini- or
micro-scaled sensors have also been developed with
high-finesse Fabry–Perot or ring shaped, acoustically
deformable cavities
[16,17]
. Recently, high-sensi tivity ultra-
sonic detection with optical fibers has been reported by
using phase-shifted fiber gratings, on-tip optical microcav-
ities, and lasers
[18–20]
. Pulse-echo biomedical imaging has
been demonstrated by pairing the optical ultrasound gen-
erator and detector
[10,11,16,17,19]
.
Now the question is how to develop an all-optical ultra-
sound probe based on optical fiber technology toward min-
iatured imaging instrumentation and micro-endoscopy.
The challenges include how to build a sufficiently strong
acoustic source with a limited laser-irradiated area as
well as a highly sensitive fiber optic sensor. Attempts have
been made by using a fiber bundle as a synthesized acoustic
source array paired with a fiber optic sensor
[11]
.However,
the fiber bundle is typically several millimeters in diameter,
much thicker than the sensor. In this work, we present an
all-optical ultrasound probe by using optical fibers with
ordinary sizes (125 μm in diameter). Light-absorbing car-
bon-nanotube-polymer composites are efficiently dip-
coated on the distal end of a multimode fiber for
efficient ultrasound generation (maximal acoustic pressure:
0.95 MPa). All-fiber ultrasound probe is formed by pairing
COL 17(7), 070604(2019) CHINESE OPTICS LETTERS July 2019
1671-7694/2019/070604(5) 070604-1 © 2019 Chinese Optics Letters
资源评论
weixin_38690275
- 粉丝: 7
- 资源: 972
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- (仅限 Vue 2)将 Vue 组件包装为 Web 组件,自定义元素 .zip
- 非常漂亮的颜色选择器.zip
- 集成axios.zip
- 集成 vuex 的原生 websocket.zip
- 针对 Google Places API 的 Vue.js 自动建议组件 .zip
- 通过动画跨路线共享组件.zip
- 适用于您的 Vue.js 项目的便捷 Moment.js 过滤器 .zip
- 适用于 Vue.js 的轻量级所见即所得 HTML 编辑器.zip
- 适用于 Vue.js 2.0 的表格(带有树形网格)组件 (其样式扩展了@iview).zip
- 适用于 Vue.js 2-3 的移动端图片文件输入组件,具有图像预览、拖放、EXIF 方向等功能.zip
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功