！！！！ rtl8189_parrotv1.1_dazu需要验证20170427_1045.7z

全志R16平台调通RTL8189ES的步骤v1.1 2017/4/20 9:37开始整理 1、在menuconfig选中rtl8189es，默认是选中的（可以不用修改！）。 小建议：先编译一遍lichee，然后再选中rtl8189es，保存之后重新解压缩lichee，替换.config，再次lichee。 rootroot@cm-System-Product-Name:/home/wwt$ cd rtl8189_parrotv1.1_dazu/ rootroot@cm-System-Product-Name:/home/wwt/rtl8189_parrotv1.1_dazu$ ll 总用量 10786992 drwx------ 4 rootroot rootroot 4096 4月 27 12:48 ./ drwxrwxrwx 15 rootroot rootroot 4096 4月 27 13:53 ../ drwxrwxr-x 27 rootroot rootroot 4096 12月 2 15:24 android/ -rwx------ 1 rootroot rootroot 8557328646 12月 2 16:08 android_parrotv1.1_20161202.tar.gz* drwxrwxr-x 7 rootroot rootroot 4096 12月 2 15:52 lichee/ -rwx------ 1 rootroot rootroot 2488523424 12月 2 16:15 lichee_parrotv1.1_20161202.tar.gz* rootroot@cm-System-Product-Name:/home/wwt/rtl8189_parrotv1.1_dazu$ cd lichee/ rootroot@cm-System-Product-Name:/home/wwt/rtl8189_parrotv1.1_dazu/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-30 4. evb-rtl8723bs 5. sc3813r Choice: 3 rootroot@cm-System-Product-Name:/home/wwt/rtl8189_parrotv1.1_dazu/lichee$ cd linux-3.4/ rootroot@cm-System-Product-Name:/home/wwt/rtl8189_parrotv1.1_dazu/lichee/linux-3.4$ make ARCH=arm menuconfig Device Drivers ---> [*] Network device support ---> [*] Wireless LAN ---> <M> Broadcom FullMAC wireless cards support (/system/vendor/modules/fw_bcmdhd.bin) Firmware path (/system/vendor/modules/nvram.txt) NVRAM path Enable Chip Interface (SDIO bus interface support) ---> Interrupt type (Out-of-Band Interrupt) ---> （关闭：） < > Broadcom FullMAC wireless cards support <M> Realtek 8188E USB WiFi <M> Realtek 8189E SDIO WiFi <M> Realtek 8723B SDIO or SPI WiFi <M> Eagle WLAN driver （修改为：） < > Realtek 8188E USB WiFi <M> Realtek 8189E SDIO WiFi < > Realtek 8723B SDIO or SPI WiFi < > Eagle WLAN driver 2、rtl8189es为单WIFI模块，去掉这里，设置中就不会出现蓝牙： Z:\home\wwt\rtl8189_parrotv1.1_dazu\android\device\softwinner\astar-evb30\overlay\frameworks\base\core\res\res\values\config.xml <!-- List of regexpressions describing the interface (if any) that represent tetherable bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this should be empty. --> <!-- default: disable Bluetooth PAN feature --> <string-array translatable="false" name="config_tether_bluetooth_regexs"> <item>"bt-pan"</item> </string-array> 3、 Z:\home\wwt\rtl8189_parrotv1.1_dazu\android\device\softwinner\astar-evb30\astar_evb30.mk （关闭BT部分：） # wifi features PRODUCT_COPY_FILES += \ frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml #frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ #frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml # ap6181/6210/6330 sdio wifi fw and nvram #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6181/device-bcm.mk) （关闭ap6212） #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6212/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6330/device-bcm.mk) 关闭BT部分： #PRODUCT_PACKAGES += bt_vendor.conf \ # libbt-client-api \ # com.broadcom.bt \ # com.broadcom.bt.xml \ # com.dsi.ant.antradio_library \ # com.dsi.ant.antradio_library.xml \ # AntHalService \ # ANTRadioService PRODUCT_PACKAGES += com.dsi.ant.antradio_library \ com.dsi.ant.antradio_library.xml \ AntHalService \ ANTRadioService （可以考虑打开这里：） #rtl8189es cob set macaddr PRODUCT_PACKAGES += setmacaddr （关闭这里：） #PRODUCT_PACKAGES += Bluetooth （可以考虑关闭这里：） #0: always; others: seconds #PRODUCT_PROPERTY_OVERRIDES += \ # debug.bt.discoverable_time=0 4、 Z:\home\wwt\rtl8189_parrotv1.1_dazu\android\device\softwinner\astar-evb30\BoardConfig.mk （打开这里：） # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration BOARD_WIFI_VENDOR := realtek 关闭这里（默认配置为使用正基的WIFI模块了，比如：AP6212A0版本）： # 1.2 broadcom wifi support #BOARD_WIFI_VENDOR := broadcom 关闭这里（没有蓝牙）： ## 2. Bluetooth Configuration ## make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor #BOARD_HAVE_BLUETOOTH := true #BOARD_HAVE_BLUETOOTH_BCM := true #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6212 ##SW_BOARD_HAVE_BLUETOOTH_NAME := ap6330 ##BOARD_HAVE_BLUETOOTH_RTK := true ##BLUETOOTH_HCI_USE_RTK_H5 := true ##SW_BOARD_HAVE_BLUETOOTH_NAME := rtl8723bs （这个也应该可以关闭的） BLUETOOTH_USE_AFBT := true 5、 Z:\home\wwt\rtl8189_parrotv1.1_dazu\android\device\softwinner\astar-evb30\init.sun8i.rc （关闭这里：） #insmod /system/vendor/modules/bcm_btlpm.ko （关闭这里：） ## bluetooth # # UART device # chmod 0660 /dev/ttyS1 # chown bluetooth net_bt_stack /dev/ttyS1 # # # power up/down interface # chmod 0660 /sys/class/rfkill/rfkill0/state # chmod 0660 /sys/class/rfkill/rfkill0/type # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state # chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type # write /sys/class/rfkill/rfkill0/state 0 # # # bluetooth LPM # chmod 0220 /proc/bluetooth/sleep/lpm # chmod 0220 /proc/bluetooth/sleep/btwrite # chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm # chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite （打开这里：） # 1. realtek & eagle wifi service # 1.1 realtek & eagle wifi sta service service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 1.2 realtek & eagle wifi sta p2p concurrent service service p2p_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -e/data/misc/wifi/entropy.bin -N \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -O/data/misc/wifi/sockets \ -g@android:wpa_wlan0 class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot （可以考虑打开这里：） #rtl8189es cob set macaddr #service engsetmacaddr /system/bin/setmacaddr /data/wifimac.txt # class main # oneshot （关闭这里：AP6212A0等等） ## 2. broadcom wifi service ## 2.1 broadcom wifi station and softap #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -I/system/etc/wifi/wpa_supplicant_overlay.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 2.2 broadcom wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -I/system/etc/wifi/wpa_supplicant_overlay.conf \ # -O/data/misc/wifi/sockets -N \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -I/system/etc/wifi/p2p_supplicant_overlay.conf \ # -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ # -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot 6、 Z:\home\wwt\rtl8189_parrotv1.1_dazu\lichee\tools\pack\chips\sun8iw5p1\configs\evb-30\sys_config.fex [wakeup_src_para] cpu_en = 0 cpu_freq = 48 ; (cpu:apb:ahb) pll_ratio = 0x111 dram_selfresh_en= 1 dram_freq = 36 wakeup_src_wl = port:PL07<4><default><default><0> （关闭这里：） ;wakeup_src_bt = port:PL09<4><default><default><0> bb_wake_ap = port:PL02<4><default><default><0> ;-------------------------------------------------------------------------------- ;wifi/bt/fm/gps/nfc modules configuration ;module_num: ; 0- none ; 1- ap6181(wifi) ; 2- ap6210(wifi+bt) ; 3- rtl8188eu(wifi) ; 4- rtl8723au(wifi+bt) ; 5- rtl8723bs(wifi+bt)/rtl8189es wenyuanbo add ; 6- esp8089(wifi) ; 7- ap6476(wifi+bt+fm+gps) ; 8- ap6330(wifi+bt+fm) ; 9- gb9663(wifi+bt+fm) ; 10- ap6212(wifi+bt+fm) ;module_power1: ""- bat, "axp_dldo1"- axp dldo1 ;module_power1_vol: power1 voltage, mv; not used for module_power1 is "" ;module_power2: ""- bat, "axp_dldo2"- axp dldo2 ;module_power2_vol: power2 voltage, mv; not used for module_power2 is "" ;module_power3: ""- bat, "axp_dldo2"- axp dldo2 ;module_power3_vol: power3 voltage, mv; not used for module_power3 is "" ;power_switch: module power switch io when bat supply ;chip_en: enable chip io ;lpo_use_apclk: ""- not use, "losc_out"- a23/33, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80/a83 ;-------------------------------------------------------------------------------- [rf_para] module_num = 5 module_power1 = "axp22_dldo1" module_power1_vol = 3300000 module_power2 = "axp22_dldo2" module_power2_vol = 3300000 module_power3 = "axp22_aldo1" module_power3_vol = 3300000 power_switch = chip_en = lpo_use_apclk = "losc_out" ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_used: 0-not use, 1- use ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wl_reg_on: wifi function enable io ;wl_host_wake: wifi device wake-up host ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wl_reg_on = port:PL06<1><default><default><0> wl_host_wake = port:PL07<4><default><default><0> （不加这个项，会调试得你怀疑人生的！^_） rtl8189es_host_wake = port:PL07<4><default><default><0> wl_host_wake_invert = 0 （关闭这里：） ;-------------------------------------------------------------------------------- ;bluetooth configuration ;bt_used: 0- no used, 1- used ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2 ;bt_rst_n: bt function enable io ;bt_wake: host wake-up bluetooth device ;bt_wak_host: bt device wake-up host ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module ; 0: not used, 1: used ;-------------------------------------------------------------------------------- [bt_para] bt_used = 0 ;bt_uart_id = 1 ;bt_rst_n = port:PL08<1><default><default><0> ;bt_wake = port:PL10<1><default><default><0> ;bt_host_wake = port:PL09<4><default><default><0> ;bt_host_wake_invert = 0